Categories

Best Bright Finish Spiral Point Taps

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

  • ★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
  • ★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
  • ★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
  • ★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
  • ★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..
Check Stock

Viking Drill and Tool by Norseman 43550 Type 240-B Bright Finish 118 Degree HSS Drill Set (115 Piece)

  • 115 pc Set High Speed Steel Bright Finish Jobber - General Purpose 118-Degree Point.
  • 1/16 - 1/2 by 64ths, #1 - #60, A - Z 118-Degree Point.
  • High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
  • Bright finish increases chip flow in softer materials such as aluminum, wood and plastic.
  • Spiral flutes with a higher flute angle to remove chips more easily.
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

  • Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

  • There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • Taps are designed with spiral flutes and the chip clearing process would be better.
  • These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
Check Stock

uxcell Spiral Flute Threading Tap 10-32 UNF, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

  • Tap Size: 10-32 UNF thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell 5/16\-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance

  • Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock