Categories

Best Broken Tap Extraction Services

JUYEER Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Headphone Tip Removal Tool with Headphone Hole Cleaning Brush

  • ✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund..
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds..
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove..
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return..
  • ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug....
Check Stock

Walton 10063 #6, 3 Flute Tap Extractor With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

  • For removing Machine Screws and Broken Hand Taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

Todays Tools scrwgrb001 Screwdriver Grip

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Walton 10253 1/4\

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Stripped Screw Remover Set - 6 Pieces - Black Nitride

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock

Walton 10124 #12, 4 Flute Tap Extractor With Square Shank

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

QWORK Tap Extractor 4 Flute Broken Head Screw Remover Stripped Tap Extractor Set Steel 3 Types 5 Pcs

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock

Fafeicy Stripped Screw Remover, Tap Extractor Set, High Speed Steel Steel Broken Head Taps Remover, Stripped Screw Tap Extractor Set, for Removing Screws and Bolts(six-piece set)

  • Tap Extractor Set is made of superior high speed steel, high hardness and anti-corrosion..
  • Each Tap Extractor is specifically engineered for speedy grab-it and easy out broken screw taps..
  • Tap Extractor Set works for removing stripped, rusted, broken, or corroded screws and bolts..
  • Every tap extractor goes through rigorous quality testing, durable to use..
  • Tap Extractor Set is suitable for industrial screw and bolt removal and for everyday home repair work..
Check Stock

BOSCH BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Tap Extractor - Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set(10件套)

  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise.
Check Stock

Walton 30374 3/8\

  • Made of superior high speed steel, high hardness and anti-corrosion..
  • Each tap extractor is specifically engineered for speedy grab-it and easy out broken screw taps..
  • Works for removing stripped, rusted, broken, or corroded screws and bolts..
  • Every tap extractor goes through rigorous quality testing, durable to use..
  • Suitable for industrial screw and bolt removal and for everyday home repair work..
Check Stock