Categories

Best Broken Tap Extractors

TEMO 5 pc Heavy Duty Screw Extractor Kit Damage Broken Bolt Removal Tool Set

  • 5pc heavy duty extractors to remove damaged screw or bolt. Extractors are made of high carbon alloy tempered steel. Hardend for long life..
  • SIZES: #1, #2, #3, #4, & #5. EXTRACT A WIDE VARIETY OF SCREWS FROM 1/8" (3.175mm)-3/4" (19.05mm) IN WIDTH.
  • VERY EASY TO USE. REVERSE THREAD LOCKS ON AND BACKS OUT BROKEN STUDS.
  • Plastic storage case included. | Direction: STEP 1. PRE-DRILL THE CENTER OF THE BROKEN BOLT. STEP 2. INSERT SCREW EXTRACTOR. STEP 3. WHILE APPLYING DOWNWARD PRESSURE TURN EXTRACTOR LEFT WITH A TAP WRENCH, IF YOU DON'T HAVE A TAP WRENCH, A STANDARD VISE-GRIP CHANNEL LOCK WILL ALSO WORK..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stock

Walton Tools 18001 Tap Extractor Set Black

  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely..
Check Stock

OCGIG 11 PCS Damaged Broken Screw Extractor Drill Bit Bolt Stud Remover Tool Kit Set

  • Made from Chrome vanadium steel, High hardness.
  • Drill bits' diameters and recommended extract diameters of broken screws are etched on case.
  • Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power.
  • Ideal to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc.
  • Note:First drill a dragon on the broken screw with an electric drill, then gently tap the extractor into the hole and use a wrench to rotate counterclockwise to take it out.
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • DIMENSIONS - 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against lost screw extractors..
  • APPLICATION - Damaged Screw Extractor Set Designed to remove broken screws, studs, bolts and other fittings effectively..
  • MATERIAL - Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
  • FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole wi....
Check Stock

Hanson 52402 Extractor Ex-2 Spiral, for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors feature an aggressive left-hand spiral design for extra gripping power.
  • IRWIN screw extractor size and recommended drill bit size are etched on each tool.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Recommended for use with TR-88 tap wrenches and 7/64-inch drills.
Check Stock

YESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts

  • 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check Stock

Topec 29 Piece Bolt Extractor and Drill Bit Set, Multi-spline screw extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)

  • 【29-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit. It contains 9pcs nut removers, 10pcs left hand HSS drill bits, 10pcs multi-spline screw extractors. Multiple specifications and sizes to meet your various work needs..
  • 【EXACT SIZE】: Screw remover kit parts have clear specifications printed on them, 9pcs nut removers size: 3/4” (19mm), 11/16”, 5/8”(16mm), 9/16”(14mm), 1/2”, 7/16”(11mm), 3/8”, 5/16”(8mm), 1/4”. 10pcs drill bit size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8". 10pcs multi-spline screw extractors size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8"..
  • 【HIGH QUALITY】: The nut remover/multi-spline screw extractor are made of high hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws. The left hand drill is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surfa....
Check Stock