Categories

Best Brone Copper Tube

Quickun Copper Tube 1/12\ ID × 1/8\ OD (2-3mm)Seamless Round Pipe Tubing (6.56FT)

  • 【Size】: 1/12" ID - 1/8"OD (2-3mm) | Tube Wall: 1/48" | Length: 6.56 Feet.
  • 【Duarble Material】: Soft copper pipe copper pipe is made of high quality copper material, corrosion resistance, excellent ductility and electrical conductivity, can adjust the required length of their own processing. The surface is smooth without seam..
  • 【Good Thermal Conductivity】: Used in manufacture of magnetism instruments or meters..
  • 【Wide Range Of Use】: Soft copper tube as refrigeration tube coil tube is widely used in refrigerators, freezers, air conditioners, DIY projects, hobbies, crafts, architectural models, architectural decoration, frame, industry, gardening products, electrical and thermal conductivity, etc..
  • 【Wonderful Plasticity】: Easy to work under hot and cold pressure. The floppy copper tube can be bent and deformed as needed to meet different needs..
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

Belissy® Copper Joint Tube - 250 Pcs Red Copper Connecting Tube GT1-6mm Intermediate Wire Joint Tube Connector Electronic Tool with Storage Case

  • ✔【High-quality Materials】This copper joint tube intermediate wire joint is made of high-quality red copper, with high conductivity and good performance..
  • ✔【Seven Kinds of Copper Joint Tubes】This copper joint tube has seven kinds of copper joint tubes of 2.2mm~6.5mm, which are used for different connections of different cords..
  • ✔【Round Design】This copper joint tube has a round design, which is more compact and sturdy, making it work more stable..
  • ✔【With Storage Box】This copper joint tube is integrated in a box, which is easy to carry and easy to pick and place..
  • ❤We Care for You❤ No matter when is before-sale or after-sale, if you have any problem about the item, don’t hesitate to let us know and timely & thoughtful customer service is always here for you..
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Copper Snuff Kits Container Tools Accessories Type B

  • [COPPER JAR]:1PCS Copper storage bottle,Waterproof and Air-tight,It can prevent odor emission.Goes with replacement seal rings.
  • [COPPER SPOON]:Spoon is also Copper material.The Size is just ok, and It looks very high grade.
  • [ALUMINUM TUBE]:Golden aluminum snuff tube,Light and Cute..
  • [5X BRUSHES]:Brushes use to clean the storage and the tube easily..
  • [GIFT FUNNEL]:Gift Funnel is used to fill the snuff easily..
Check Stock

Libraton Tubing Cutter 3/16\ to 1-1/8\

  • SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 3/16" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut..
  • STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
  • EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

Sunpak-22024 Pilot Assembly for Ng O, Aluminium

  • Suitable for Lpg propane gas heaters /ovens.
  • One flame pilot burner kit including copper tube.
  • Whole kit assembly Copper tube length: 200mm.
Check Stock

Portable Mini Powder Spice Storage Bottle with Spoon (4 Pack),Bottle for Outdoor Camping Travel

  • [COPPER JAR]:1PCS Copper storage bottle,Waterproof and Air-tight,It can prevent odor emission.Goes with replacement seal rings.
  • [COPPER SPOON]:Spoon is also Copper material.The Size is just ok, and It looks very high grade.
  • [ALUMINUM TUBE]:Golden aluminum snuff tube,Light and Cute..
  • [5X BRUSHES]:Brushes use to clean the storage and the tube easily..
  • [GIFT FUNNEL]:Gift Funnel is used to fill the snuff easily..
Check Stock

Libraton Mini Tubing Cutter Copper Cutter 1/8\ to 1-1/8\ with Deburring Tool & Replacement Blade for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut. Our copper cutter also comes with a deburring tool..
  • STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
  • EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

John Packer JP173 Baritone Horn

  • Special copper for musical instruments: The special copper material for wind music is selected, and the ratio of copper,zinc, tin and nickel is very stable, and the vibration is more uniform. Fine inner drawing tube, good sealing performance,anti-wear..
  • The excellent hand- made craftsmanship of the modern factory has a strong tone, a rich sense of brilliance, a deep ano powerful voice, and a rich expressive power..
  • Cupronickel diaphonic tube: The copper- nickel tube body is used, the copper material has high density, good air tightness, and more corrosion resistance..
  • This brass bass horn is easy to operate, affordable and durable, and it is pleasant enough to play..
  • The bass horn, also known as the mini tuba, tenor tuba, or horn, is a wonderful brass instrument. For students, beginners and musicians of all levels, having a high-quality bass trumpet can make you play, appreciate, and understand instruments in a completely different way..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

ICS Industries - 2 TYPE M HARD COPPER 5 FT LENGTH 2-1/8 OD ASTM B88 C12200

  • SEAMLESS COPPER WATER TUBE – TYPE M ,ASTM B-88.
  • Copper tube (Alloy 12200) has been evaluated by Underwriters Laboratories, Inc. To ANSI/NSF Standard 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies which are less than pH 6.5 may require corrosion control to limit leaching of copper into the drinking water. Copper tube has been NSF classified by Underwriters Laboratories, Inc. only to ensure that specific analyzed samples met regulatory requirements..
  • CUT HARD STRAIGHT LENGTH +/- 5% CUTTING TOLLERANCE.
Check Stock