Categories

Best Bronze Bearing Bushing

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Wellbody 5 | Heat Massage Gun | Deep Tissue Massaging Device | Heatball Technology | Quiet Handheld Portable | Massage Tool for Muscles | All Aluminum Powertrain

  • ...d and contract in unison when subjected to the heat and friction that is inevitable in a massage gun. This all-aluminum design dramatically reduces the system fatigue that leads to increased noise and premature system failure..
  • EXTRA-LONG ALUMINUM BRONZE BUSHING - WellBody uses an extra-long aluminum bronze bushing (bearing sleeve) which increases overall contact with the reciprocating shaft to provide greater stability and efficiency, which reduces wear and noise. Aluminum-bronze is a material known for its low coefficient of friction and superior glide ability, and, because it is metal, it will not distort..
  • DEEPSPEED- The Holy Grail in massage gun performance is speed at amplitude. Thanks to our all-In all-aluminum powertrain, state-of-the-art design and precision engineering, we are able to give you BOTH high speed AND high amplitude! Only WellBody Massage Guns achieve 3,000spm at 16mm of amplitude. We call it DeepSpeed, a combination that creates a new level of deep tissue massage..
Check Stock

Wellbody 3 | Heated Massage Gun | Deep Tissue Massaging Device | Heatball Technology | Quiet Handheld Portable | Massage Tool for Muscles | All Aluminum Powertrain

  • ...d and contract in unison when subjected to the heat and friction that is inevitable in a massage gun. This all-aluminum design dramatically reduces the system fatigue that leads to increased noise and premature system failure..
  • EXTRA-LONG ALUMINUM BRONZE BUSHING - WellBody uses an extra-long aluminum bronze bushing (bearing sleeve) which increases overall contact with the reciprocating shaft to provide greater stability and efficiency, which reduces wear and noise. Aluminum-bronze is a material known for its low coefficient of friction and superior glide ability, and, because it is metal, it will not distort..
  • DEEPSPEED- The Holy Grail in massage gun performance is speed at amplitude. Thanks to our all-In all-aluminum powertrain, state-of-the-art design and precision engineering, we are able to give you BOTH high speed AND high amplitude! Only WellBody Massage Guns achieve 3,000spm at 16mm of amplitude. We call it DeepSpeed, a combination that creates a new level of deep tissue massage..
Check Stock

QJKW axis 2pcs/lot 10x14x12mm Truck auto Copper Alloy 10 Shaft Gear Bearing Bushing Starter Motor Bronze Bush Simple Installation, Precise Production, Easy to u

  • Copper alloy 10-axis gear bearing bushings for trucks and automobiles.
Check Stock

Hotop, 6 Pieces Thick Reducing Bushing Adapters Steel Reducer for Bench Grinding Sanding Wheels Id 12 Inch Od 58 Inch, 34 1 (1 Inch)

  • Auto Metric Bearing Bushing Driver Set Auto Bearing Race And Seal Driver Set, Bearing and Bushing Isolator Driver Set..
  • Used in import and domestic cars trucks tractors construction equipment electric motors and many other components having bushings.
  • Includes 3 sizes of drivers/handles: small (4-1/2inches long x 7/16inches diameter), medium (5-1/2inches long x 5/8inches diameter) , and large (6-1/4inches long x 7/8inches diameter).
  • Includes 30 bushing drivers both metric and standard.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

Pertronix D133700 Flame-Thrower Plug and Play Vacuum Advance Black Cap Billet Electronic Distributor with Ignitor II Technology for Ford FE 352-428

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

PerTronix D130700 Flame-Thrower Plug and Play Vacuum Advance Black Cap Billet Electronic Distributor with Ignitor II Technology for Ford Small Block

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.Compatible with most Capacitive Discharge Systems.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
  • PerTronix D130700 can be used only with Engine Family - 221-302 V8.
Check Stock

PerTronix D130710 Flame-Thrower Plug and Play Vacuum Advance Black Male Cap Billet Electronic Distributor with Ignitor II Technology for Ford Small Block

  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
  • Our Billet I2 distributors ship with Ignitor II modules factory installed.
  • Each billet distributor is hand polished and buffed to a high luster.
  • Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
  • Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock