ICQUANZX DC Motor Speed Controller, 60A DC10-55V Motor Governor High Power Control Board with Digital Display - 0-100% Adjustable

  • Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 60A..
  • The input voltage range from DC 10V to 55V, and the rated current 60 amp, so it's really a large power speed controller..
  • Can adjust the motor speed through potentiometers, and support rotation adjustment..
  • Fitted with a display panel which display the rate in percent of actual speed to maximum speed..
  • Apply to: DC brush motor / brush fan / LED.
Check Stock

Low Voltage Dc 1.8v 3v 5v 6v 12v 2a Motor Speed Controller PWM 2PCS

  • Speed Control Switch Low Voltage DC 1.8V 3V 5V 6V 12V 2A.
  • Motor Speed Controller with a self-recovery fuse 2A and a Power-On LED light.
  • Provide a continuous current of 2A to your DC brush motor or other DC load.
  • This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling.
  • Please just send us an email if there is any issue and we will solve it within 24 hours.
Check Stock

Riorand DC 3V 6V 12V 24V 35V 5A Motor Speed Controller PWM Speed Control Ultra Small LED Dimmer(2PCS)

  • Speed Control Switch Low Voltage DC 3V 5V 6V 12V 5A.
  • Motor Speed Controller with a self-recovery fuse 5A and a Power-On LED light.
  • Provide a continuous current of 5A to your DC brush motor or other DC load.
  • This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling.
  • Please just contact me by email if there are any issue and I will solve it within 24 hours.
Check Stock

DC Motor Controller, Yeeco DC 10-60V 12V 24V 36V 48V 60V DC Motor Speed Controller, PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Control Switch

  • WIDELY OPERATING RANGE:Input:DC 10-60V,max drive current is 6A,Maximum wattage is 300W,PWM pulse width adjustable range: 10%-100%.
  • ADJUSTABLE KNOB:DC brush motor speed driver is designed with a voltage adjustment knob, very convenient for voltage control., DC output stepless adjustable..
  • WIRING TERMINALS DESIGN: The wiring terminals adopts fence type design and is with safety cover, and there is wiring marks on each terminal, please follow the marks when you are wiring..
  • SPECIFICATION:Small Size:0.4×3.9×2.4inch, DC motor speed controller has high precision, wide speed controlling range, low power consumption and long service life.
  • OCCASION:Pwm dc motor speed controller widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

4Nm Nema34 4.5N.m Closed Loop Servo Stepper Motor 4.5Nm 82mm 6A w/ 2 Phase Hybrid HSS86 Servo Driver w/ 3M encoder extension wire CNC Controller Kit for CNC Router Engraving Milling Machine

  • This driver board can be fit for DC brush less without hall sensor three-phase motors.
  • It was with an heat sink,and also coming with speed controller and forward -reverse switch cable.
  • This brush less motor controller features wide voltage high power, suitable for both small motor and large motor..
  • This motor controller has the function of over-current protection.
  • This item can be used directly, when you got it, wide voltage 5-36V, high power 350W, with heat sink, lead wire, control switch, so convenient.
Check Stock

LEDMOMO 1203BB 6V 12V 3A 80W DC Motor Speed Controller (PWM) Adjustable Motor Driver Switch

  • 1203BB DC Motor Speed Controller regulate the speed of the motor by adjusting Pulse-Width Modulation (PWM)..
  • Working Voltage: DC 6-24V. Maximum continuous output current : 3A. Maximum output power: 80W..
  • The Motor Speed Controller built-in switch. You can control the forward direction and the stop of DC motor by the switch..
  • The circuit built-in a 3A fuse. Make the use of this motor safer..
  • Note! DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply..
Check Stock

Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V.
  • Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed..
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation..
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance..
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy..
Check Stock

RioRand Upgraded Adjustable DC Motor Speed PWM Controller 10V 12V 24V 30V Reversing Switch 120W

  • Overload short circuit protection current:4A ,short circuit time does not exceed 30 seconds.
  • PWM Pulse Width Modulation Range: 5% -95%.
  • Please note that this controller has a low frequency causing some types of the motor to whine at low speeds but not all motors will be like this.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock

AmpFlow E30-150 Brushed Electric Motor, 12V, 24V or 36 VDC, 5600 RPM

  • Fundamental Parameters: This brushless go kart motor is powerful and efficient. Input Voltage: 48V DC, Output Power: 1800W, Rated Current: 33A, Rated Speed: 4500 RPM, Maximum Speed: 5200 RPM, Sprocket: T8F-9T, Maximum Current: 37.5A. Package includes: 1 x Brushless DC Motor, 1 x Speed Controller,1 x Throttle Grip, 1 x Screw Set, 2 x Wrench..
  • 1800W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
  • Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
  • Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Potentiometer. Model: BY15WF01-A, Current: 33A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer,you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock