Best Brushless Exhaust Fans

RLOZUI Exhaust Fan, 8 Inch 500 CFM Wall Mounted Vent Fans,Exhaust Shutter Fan for Bathroom Attic Kitchen Window Basement 110V 80W (8 inch, Black)

...in Storage, Chemicals, Tunnels, Automobile Manufacturing and Other Fields.
【8 INCH ATTIC FAN PARAMETERS】Dimension:25 x 15 x 20cm/9.8 x 5.9 x 7.9inch.
Air Flow: 500 CFM, Power:80W, Voltage: 110V, Frequency: 60Hz, Speed: 2800r/ min.
【HIGH-QUALITY MOTOR】This Bathroom Fan is Adopts Double Ball Bearing Outer Rotor Brushless Motor to Ensure High Efficient, Quiet Operation and High-quality Performance. Compared with Ordinary Motors, the Upgraded Motor Can Reduce Friction Coefficient, Save Electricity Effectively and Enlarge the Service Life of the Machine.
【OVERHEAT PROTECTION】Adopting an Axial Pipe Fan, Stronger Wind Design, Effectively Reduce Heat Generation, Can Realizes Optimal Cooling Effect.Built-in Overheating Protection Device Cuts off the Contacts when the Motor is Overheated, Which Plays a Role of Power Failure Protection.
【STABLE & DURABLE】The Ventilation Fan is Made of High-quality Metal Materials, with a Bright Surface, Anti-corrosion, Anti-scratch,automatic Closing Valve and Prevent Inhalation of Foreign Objects.
【NOTE】The Two Black Wire Are Used for Hot Wires and Neutral Wire. the Yellow with Green Stripe Wire is Used for Grounding Wire and Without Screws,Without Plug.

Check Stock

Veris,Current Switch,SolidCore,Fxd,N.O,250V, H800-HV

Hawkeye 800 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads Great for lighting status less expensive than 277V relays Removable mounting bracket provides installation flexibility.
saves valuable panel space100% solid-state, no moving parts to failPolarity insensitive output5-year limited warranty.

Check Stock

RLOZUI 8 inch Exhaust Fan, 735CFM Wall Mounted Vent Fans, Ventilation Blower for Ceiling Bathroom Attic Window Basement Ventilation Fan, 110V 80W

【STABLE & DURABLE】The Ventilation Fan is Made of High-quality Metal Materials, with a Bright Surface, Anti-corrosion, Anti-scratch,automatic Closing Valve and Prevent Inhalation of Foreign Objects.
【HIGH-QUALITY MOTOR】This Wall Ceiling Ventilation Fan is Adopts Double Ball Bearing Outer Rotor Brushless Motor to Ensure High Efficient, Quiet Operation and High-quality Performance. Compared with Ordinary Motors, the Upgraded Motor Can Reduce Friction Coefficient, Save Electricity Effectively and Enlarge the Service Life of the Machine.
【OVERHEAT PROTECTION】Adopting an Axial Pipe Fan, Stronger Wind Design, Effectively Reduce Heat Generation, Can Realizes Optimal Cooling Effect.Built-in Overheating Protection Device Cuts off the Contacts when the Motor is Overheated, Which Plays a Role of Power Failure Protection.
【8 INCH PARAMETERS】Dimension:25 x 15 x 20cm/9.8 x 5.9 x 7.9inch.
Air Flow: 735 CFM, Power:80W, Voltage: 110V, Frequency: 60Hz, Speed: 2800r/ min.
【NOTE】Two Wiring Methods:1.Blue to Black (L),Brown to White (N ),Yellow to Green (E) 2.Blue to Black (L),Blue to White (N ),Yellow to Green (E), Without Screws,Without Plug.

Check Stock

RLOZUI 6 inch Exhaust Fan, 382CFM Wall Mounted Vent Fans, Ventilation Blower for Ceiling Bathroom Attic Window Basement Ventilation Fan, 110V 40W

【STABLE & DURABLE】The Ventilation Fan is Made of High-quality Metal Materials, with a Bright Surface, Anti-corrosion, Anti-scratch,automatic Closing Valve and Prevent Inhalation of Foreign Objects.
【HIGH-QUALITY MOTOR】This Wall Ceiling Ventilation Fan is Adopts Double Ball Bearing Outer Rotor Brushless Motor to Ensure High Efficient, Quiet Operation and High-quality Performance. Compared with Ordinary Motors, the Upgraded Motor Can Reduce Friction Coefficient, Save Electricity Effectively and Enlarge the Service Life of the Machine.
【OVERHEAT PROTECTION】Adopting an Axial Pipe Fan, Stronger Wind Design, Effectively Reduce Heat Generation, Can Realizes Optimal Cooling Effect.Built-in Overheating Protection Device Cuts off the Contacts when the Motor is Overheated, Which Plays a Role of Power Failure Protection.
【6 INCH PARAMETERS】Dimension:19 x 13.5 x 15cm/7.5 x 5.3 x 5.9inch.
Air Flow: 382 CFM, Power:40W, Voltage: 110V, Frequency: 50Hz, Speed: 2800r/ min.
【NOTE】Two Wiring Methods:1.Blue to Black (L),Brown to White (N ),Yellow to Green (E) 2.Blue to Black (L),Blue to White (N ),Yellow to Green (E), Without Screws,Without Plug.

Check Stock

GDSTIME 2 Pack 80mm x 25mm Dual Ball Bearings High Speed 4500RPM 12V DC Brushless Cooling Fan

Such as work shops, outdoor electric cabinets, truck, etc. max. 43.2 dBA @ 4500 RPM.
【Powerful Airflow】The fan moves a lot of air.
you can use this fan for cooling a device or increasing ventilation or airflow at a particular place. Airflow: 59 CFM.
【Dual-Ball Motors】The fan features a brushless motor.
precision dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.
【Easy to Install】Fan size (edge to edge): 3.15 x 3.15 x 0.98 in. (80 x 80 x 25 mm).
Hole to Hole Distance: 2.82 x 2.82 in. (71.5 x 71.5 mm).
The fan can be used as both intake or exhaust fan inside your electronic enclosure or server chassis.
【XH 2.54mm 2 Pin Plug】It is a 2-pin connector fan with 11.8 in. enough long power wires.
You can easily exchange the wires if their position is different from your old fan.
【Long-lasting Cooling】Start Voltage: 3.5V.
(overtake 13.5V, it can also work. but it is not safe and will seriously affect the service life of the fan.).
【What You Get】Includes 2pcs GDSTIME 80x80x25mm 12v dc fans, two 80mm metal fan grills, and mounting screw set.

Check Stock

TerraBloom ECMF-315, Quiet 12' (313mm OD) Inline Duct Fan with 0-100% Variable Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor.

...uct fans are used in indoor grow facilities and vertical farms, heating and cooling transfer, commercial drying and air filtration applications. Our inline blowers can also create negative pressure environments, simulate wind, exhaust odors and smoke as well as intake fresh air from outdoors.
Built with cutting edge brushless EC Motor and dual jet type blades, this blower delivers 1662 CFM airflow rate using 260 Watts at max speed. It translates into only $660 annual cost of 24/7 operation at max speed using $0.29 average cost per KWH. Our fans don’t “purge” or waste electricity at lower speeds..
Our EC fan gives you a unique flexibility of controls – choose any speed from 0 to 100% using 2 (digital and analog) included speed controller without creating background noise or hum at low speeds. Or choose to upgrade to a wireless remote control (Model: ECMF-WR) or intelligent thermostat speed controller with temperature programming (Model: SC-ECMF). This fan supports 3d party PWM and 0-10V controllers via 3.5mm TRRS port.
Coated steel housing resists rust, protects motor and blades from accidental damage and harsh elements to reduce maintenance in demanding applications. This fan has IP64 ingress protection rating.

Check Stock

Hon&Guan 4\ x 8FT Aluminum Foil Insulated Flexible Duct, Dryer Vent Hose for HVAC Ventilation and Duct Fan Systems , 2 Clamps Include.

【LOW NOISE SILENCER】4 inch duct designed for reducing noise from fans and carbon filter systems, can decrease the noise by up to 50%..
【4 INCH DUCTING LIGHTPROOF】Thick layer of black PVC on flex duct prevents light leaks. Works with exhaust and intake fans, carbon filters and hooded lights which are 4" in diameter..
【3-LAYER TOUGH】Hon&Guan dryer exhaust hose keep your ventilation system free of rips and pin holes. The dryer duct is built with 2 layers of aluminum foil with a layer of PET and steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes..
【FLEXIBLE AND EASY TO USE】Our flexible dryer vent hose is easy to install, it will slide right on your duct fan, vent exhaust, carbon filter or light reflector..
【VARIETY OF APPLICATIONS】Hon&Guan dryer duct hose is suitable for HVAC system. It will move and deliver air in kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), dryer rooms, grow tents and other applications etc..

Check Stock

Hon&Guan 6 inches Air Carbon Filter Odor Control with Activated Charcoal for Hydroponics Inline Duct Fan Grow Tent Prefilter Included White

Hon&Guan Carbon Filter: 6 inch carbon filter with Australia virgin activated charcoal bed, environmentally friendly, machine packed carbon enables....
Air Scrubber: Galvanized Steel material more durable than aluminum, is not subjected to any chemical corrosion, lasts long from plants germination,....
Reversible Smell Filtration: The charcoal air filter can be used as both Intake Filter and Exhaust Filter. After a period of time use as an intake....
Odor Control: Designed for enclosed environment. Our filter will soak up and eliminate some of the most undesirable and ill-smelling odors. Keep your....
Fresh Air Combo: The 6 in carbon filter matches with 6 inch inline fans, duct fans, intake fans, exhaust fans, air exchange fans, ventilation duct,....

Check Stock

JOD Router Fan Variable Speed Controller Control for Electric Motor Rheostat AC 120 Power from 500w to 1800w Adjuster

Fan speed controller applicable for fan or router which power is from 500w to 1800w, Electric Motor Rheostat AC 120 V/15 amps..
One control switch for 3 settings: Variable, Off, and Full.
Speed control dial to control variable speed: Low, Medium or High speed..
Multi-Fonction: Makes the fan speed control easy to adjust the speed of your inline fans and duct fans，don't use it on brushless type motors..
Package include : 1 x Variable Fan Speed Controller..
Note:Fan Speed Controller use with brush type motors only, Will not work with brushless type motor or soft/slow start motors,Use with centrifugal fans only..

Check Stock

Powerful Industrial Exhaust Fan 36 Inch

INDUSTRIAL EXHAUST FAN: This MaxxAir 36" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of....
THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy....
EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It....
HEAVY DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges....
EXHAUST FAN WARRANTY: This heavy duty exhaust fan has a 1 year limited warranty. The shutters open and close automatically. Fans do not come with....

Check Stock

Hon&Guan 3' x 8FT Insulated Duct with Aluminum Foil, Flexible Dryer Vent Hose for HVAC Ventilation and Duct Fan Systems, 2 Clamps Include.

【LOW NOISE SILENCER】3 inch duct designed for reducing noise from fans and carbon filter systems, can decrease the noise by up to 50%..
【3 INCH FLEXIBLE HOSE LIGHTPROOF】Thick layer of black PVC on dryer hose prevents light leaks. Works with exhaust and intake fans, carbon filters and hooded lights which are 3" in diameter..
【3-LAYER TOUGH】Hon&Guan 3 inch duct hose keep your ventilation system free of rips and pin holes. The flex duct is built with 2 layers of aluminum foil with a layer of PET and steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes..
【FLEXIBLE AND EASY TO USE】Our air duct is easy to install, it will slide right on your duct fan, vent exhaust, carbon filter or light reflector..
【VARIETY OF APPLICATIONS】Hon&Guan 3 inch dryer vent hose is suitable for HVAC system. It will move and deliver air in kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), dryer rooms, grow tents and other applications etc..

Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
Plastic construction 9 blade fan. Dual Ball Bearing.
DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.

Check Stock

MaxxAir IF24UPS IF24 Powerful Industrial Exhaust Fan 24-Inch

INDUSTRIAL EXHAUST FAN: This MaxxAir 24" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of....
THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy....
EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It....
HEAVU DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges....
EXHAUST FAN WARRANTY: This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with....

Check Stock