Categories

Best Brushless Worm Gear Motor

Bringsmart JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

  • ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
  • GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque..
  • Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output..
Check Stock

SKIL 7-1/4 IN. TRUEHVL Cordless Worm Drive SKILSAW with TRUEHVL Battery, Diablo Blade-SPTH77M-12

  • The first and only cordless Worm Drive saw gives you legendary SKILSAW power to go anywhere.
  • TRUEHVL battery is designed specifically to power Worm Drive SKILSAW.
  • Jobsite durability and performance from magnesium construction, brushless motor, and electric brake.
  • The convenience of a cordless saw without compromising any Worm Drive power or performance.
  • The same design, balance and controls of our corded Worm Drive, so it feels familiar right out of the box.
  • A fully charged TRUEHVL battery makes 425 cuts.
  • Integrated dust extraction system to work cleaner.
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

Plastic Gears Set Pulley Belt Worm Kits Crown Gear Set Robot Motor Toy DIY Parts for Model Amateur(64 new gear packs)

  • Worm and worm gear Coincide distance from the center distance is 8 mm.
  • 1pairs x 0.5 Modulus Small Reduction Ratio of 1:10 Motor Output Copper Worm Wheel Gear For DIY.
Check Stock

Rotating Platform TBVECHI HT03RA100 Precision Electric Rotating Machine Optical Rotating Platform Motorized Rotation Stage 100mm Bearing Scale

  • 【HT03RA100 Rotating Platform】HT03RA100 Precision Electric Rotating Machine Optical Rotating Platform Motorized Rotation Stage 100mm Bearing Scale. Fine grinding worm drive, comfortable movement, backwards can be neglected, the motor is connected with the worm through a high-quality elastic coupling, synchronous drive without noise. Dash the outside of the platform to easily read the scale..
  • 【Description】High-precision electric rotating platform, new construction, new technology.
  • key indicators have passed strict inspection. This series of products are used for laser precision machining, 3D scanning measurement system, etc., using worm gear, friction resistant material, high precision of rotation precision, outer ring With scale, interface..
  • 【Features】Worm gear transmission mode, using special process, high wear resistance, reliable and reliable, high precision shafting makes high rotation precision, large bearing capacity and stable movement. Widely used in industrial automation and scientific experiments, the scale ring is installed on the outer ring of the rotary table to facilitate initial positioning and reading. The electronically controlled rotary ....
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

  • Robust Aluminum Construction: The electric brushless dc motor kit is made of an aluminum alloy shell that withstand heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor, so you can easily switch the rotating gear..
  • Basic Parameters: This brushless go kart motor is strong and efficient. Input Voltage: 48V DC, Output Power: 2000W, Rated Current: 34A, Rated Speed: 4300 RPM, Maximum Speed: 5400 RPM, Maximum Current: 42A, Sprocket: T8F-11T. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi- purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 2000W Brushless Motor: DC electric go kart brushless motor adopts 100% copper core, with low operating noise and excellent speed regulation performance. The high-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
  • Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
Check Stock

WLtoys 104072 RTR 1/10 2.4G 4WD 60km/h Brushless RC Car Drift On-Road Metal Chassis LED Light Vehicles Model Off-Road Climbing Truck

  • ...bout by a variety of terrains plus independent suspension swing arm Smooth straight driving and excellent body control posture.
  • 3. The whole vehicle adopts ball bearing alloy gear simulation differential structure metal base plate, driving smoother, gear durable. 4. Adopt 7.4V 3000mAh high rate lithium-ion battery, brushless motor power output, speed up to 60 km / h.
  • 5. Adopt 6KG 3-line steering machine to control steering, straight driving is more stable Over-bending control is more flexible and durable. 6. Natural rubber tires, strong ground adhesion and friction resistance.
  • 7. Cool LED lighting car shell can control breathing headlights and simulated turn signals Brake lights Night operation barrier-free. Package Included: 1X RC Car 1X Remote Controller 1X Battery (Depends on your order selection) 1X USB Charging Cable 1X Manual 1X Cross Sleeve,Tips for Buyers:the remote control car is too fast, it is recommended to use remote control car in open areas to avoid bumping into obstacles..
  • Using brushless motor, fast speed, Using brushless motor, fast speed, high effciency, speed up to 75Km/h. High quality motor to make horsepower more powerful, faster than the same type of car. INDEPENDENT 60A ELECTRIC MODULATION ●INDEPENDENT RECEIVER ●INDEPENDENT ....
Check Stock

Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor

  • 【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
  • 【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
  • 【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
  • 【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
  • 【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..
Check Stock

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

  • Application size: Stepper motor 8mm to 11mm bore adapter.
  • Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.
Check Stock

60:1 Worm Gear Speed Reducer Reduction Gearbox Ratio Gear Box

  • Input Bore Size: 11mm Input Flange Model: NEMA23.
  • Output Bore Size: 14mm Application: Matched with Servo/Stepper Motor.
Check Stock

Motor Vehicle Sundown

  • 【60+KM/H Amazingly Speed】Brushless power delivered by a Type 2845 brushless motor at KV4200 brings about the top speed up to 60+kmh 37+mph Max. With 45A brushless ESC, 2.1kg high torque steering servo (metal gear), LED lighting system,four wheels are installed independent suspension spring let cross-country car body more flexible..
  • 【2845 Brushless Motor & Wheelie Bar】Extreme Brushless RC power, designed stiff and fast , compared with the brushed motor, the life of the brushless motor is 2-3 times that of the brush motor and the power consumption is only 1/3 of the brushed. What’s more, the rear comes with upgraded wheelie bar,This this can be very effective in preventing the car from falling backwards resulting in unnecessary damage..
  • 【Aluminum Oil-Filled Shocks & Durable Metal Chassis Construction】The remote control car is built around a durable tub style chassis that protect the electronics. Four aluminum oil filled shocks with an off road suspension makes the rc monster trucks fun on all surfaces. Huge trailing arm and heavy-duty linkages,along with functionallimit-straps, keep the solid axle firmly positioned..
  • 【2 Packs 1050mAH Smart Batteries & 2 Packs RC Car Shell Body 】The RC Car is equipped with TWO 7.4V 1050mAh hard case recha....
Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

  • Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
  • Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
  • Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..
Check Stock