Categories

Best Bs Standard Check Valve

Weathermatic T3-36 Full Circle Sprinkler Rotor

  • Part circle models adjust from 40 – 360°.
  • 14 field-changeable nozzles – SmartAngle (low angle) and Flow.
  • Standard Ready Check check valve on T3 and T35 models is easily reversed in the field to a “check” position. Check valve holds back 12’ (3,7....
Check Stock

CKAuto TR415 Tubeless Rubber Snap-in Tire Valve Stem (50pcs/Bag), Black

  • High Quality: TR415 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.625” (16mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for most passenger car & light trucks with tubeless tire valves.
  • Dimension： 46 x 24mm/1.81x0.94 inch(L*D).
  • (Pack of 50) Valve Stem 5/8" Rubber - TR415.
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 4

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 2-1/2

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

Woen-Flow Brushed Nickel Kitchen Faucet Head Replacement, G1/2 Connector Not Compatible with Delta Moen, etc, Dual Aqua-blade

  • Please Note: not compatible with Delta, Moen, etc. In order to get a right one, please must check the inside diameter and other details, and compare your original faucet head with ours..
  • Step 1: Check if your hose with check valve or not. This faucet head ONLY fits for the hose without check valve/ backflow preventer.
  • DO NOT fit for the hose with check valve!.
  • Step 2: Standard G1/2 connector - The OD of this faucet head male connection is 13/16" (20.5mm), NOT universal! Please must carefully check the pictures and specification before purchase!.
  • Step 3: Check the Diameter of sprayer head neck and faucet elbow, and ensure both them are 28mm. Bucause there are several sizes of faucets on the market, sprayer heads and kitchen faucet elbow are different..
  • 3 Modes Sprayer Head: Stream, Spray, Dual Aqua-blade. Soft stream mode is used in regular.
  • Spray makes sense in large area cleaning.
  • High-Pressure Dual Aquablade can easily flush the sticky residue..
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (50pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 50 x TR412 Tire Valve Stem.
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (5pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 5 x TR412 Tire Valve Stem.
Check Stock

Mellbree Tire Valve Extensions 8.25 Inch Flexible Schrader Tire Valve Stem Extension with 90 Degree Schrader Tire Valve Stem Extension Adaptor Compatible for Harleys RV Bicycles Motorcycles（2pcs）

  • These long flexible tire air valve extenders successfully solved a series of operations such as inability to pump or check air pressure due to....
  • The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.....
  • The tire valve extension joint is made of brass, which has strong wear resistance. Equipped with rubber sealing ring and sealing cover, durable. The....
  • These tire valve extensions are rubber hoses, flexible and durable, and strong plasticity. With rim clamps, you can work more efficiently, check the....
  • These tire valve extensions suitable for most bicycles, motorcycles, strollers, trailers, RVs with standard American tire valves..
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

275-330 Gallon Tote Water Tank Adapter 2' Coarse Thread Brass Hose Faucet Valve Garden Hose Connector Replacement IBC Tote Valve Fitting Parts

  • ...oarse Thread IBC Tank Adapter, which converts a 2 inch coarse thread valve into a Brass Garden Hose Ball Valve Faucet 3/4” Ring Connector. Your tank drain outside diameter is actually 60mm or 2.36″, and with coarse thread pitch is 6mm (0.24″)-Most Common Thread Found On European IBC’s. Not American National Standard Straight Pipe Thread. So pls check carefully your IBC tote valve thread is coarse thread before purchasing. Thanks for your cooperation!.
  • 【Widely Applications】This water tank faucet adapter is widely used in garden irrigation, home, industrial irrigation and other scenes. It fits most standard European IBC containers. Can be used as a quick contact switch for IBC tank adapter with coarse thread, this is a great way to stop beating your knuckles on the cage of the Tank. And it also preserves the Life of Your Existing Valve..
  • 【Easy to Install & Use】Safe for using. Fit for IBC tank vavle. The ibc tote garden hose adapter switch is made of high-quality and non-slip plastic, can be shut off quickly by rotate 90 degrees clockwise, convenient switch to control the water output. Operation is simple and practical..
  • 【Good Tightness】The connection between this water tank faucet adapter and IBC tank valve is spiral. Effectively ensur....
Check Stock

Aquarium Air Pump Accessories Set 25 Feet Airline Tubing with 6 Check Valves, 6 Control Valve and 40 Connectors for Fish Tank White

  • 1 roll of 25 Feet Standard 3/16" Air Line Tubing, Suitable for aquarium, fish tank and hydroponics..
  • Flexible Air tubing,without kinking that stands up to wear and will not crack or become brittle over time..
  • 40 Connectors (Straight & T-shape) - Perfectly connect standard tubing, T-connector allows you to combine two inputs to create one output with dual outlet pumps..
  • 6 Pcs Air Control Valve and 6 Non-Return Check Valve..
  • Excellent 3/16 inch ID Standard airline tube holder, stick tightly to the smooth fish tank. Red clear valve can prevent water from back siphoning..
Check Stock

PumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T

  • ...a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. Works with any pump containing a 1-1/2" NPT discharge..
  • UNIQUE SPRING-LOADED FLAPPER: The unique spring-loaded flapper on our sump pump check valve eliminates the water hammer noise of standard check valves for silent operation. No more sudden noises that disrupt your lifestyle or sleep. With this check valve, water hammer noise will be a nuisance of the past!.
  • 100% STAINLESS STEEL HOSE CLAMPS: Our sump pump check valve threads directly into the pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. With durable ABS construction, you can have a system that'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
  • PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our “full-flow” check valves prevent the water that remains in the sump discharge pipe from falling back into the sump pit. ....
Check Stock