Categories

Best Bsw Machine Flange

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

for Horizon Elliptical Power Cord for Horizon EX-59 Elliptical EX59 EX 59 EX-69 Fitness 12V AC Adapter

  • A replacement horizon elliptical power cord for ex-59 EX59 EX 59 EX-69 Fitness machine.
  • 12V power cord for Horizon EX-59 EX59 EX 59 EX-69 EX-33 EX-44 EX-79 EX-65 EX-66 CX-66 E-500 E-6 E-700 E-800 E-95 EX-56 EX-75 LS-635E Elliptical.
  • If you lost your original cord, only have to spend few to make your ex-59 elliptical work again.
  • Input: AC 100V-240V, Output: DC 12V, US standard AC adapter for Horizon BSW0134-1202002W.
  • You will get 1pcs power cord for Horizon elliptical, 30 days refund & 12-month warranty and lifetime professional product technical support ,24-hour....
Check Stock

T-Power Compatible for Horizon Fitness Elliptical Trainer Exercise CX66 E500 E6 E700 E800 E95 EX33 EX44 EX56 EX59 EX79 EX65 EX66 EX75 EX-33 EX-44 EX-65 EX-66 CE4.1 EX-69 Ac Dc Adapter Charger Power Supply

  • T-Power (TM) Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft.
  • Brand-new Input Voltage Range: AC 100V - 240V ( 12v ) p/n: BSWO134-1202002W BSW0134-1202002W BSW01341202002W.
  • Compatible Models: Horizon Fitness EX-33 EX-44 EX-59 EX-79 EX-65 EX-66 CE4.1 EX-69 CX-66 E-500 E-6 E-700 E-800 E-95 EX-33 EX-44 EX-56 EX-65 EX-66 EX-75 LS-635E Elliptical.
Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

  • Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

Chic Home Bliss Garden 8 Piece Embroidered Comforter Set, King, Sage

  • 1pc Comforter with Faux silk pleated flange: 110x96" , 2pc Pillow Sham: 20x36+2" , 2pc Euro Sham Faux silk: 26x26+1.5 inch Flange, 1 Bed skirt pleated faux silk: 78x80+15" , 1pc Cushion: 18x18" , 1pc Rectangle Pillow: 12x18" , 1 Round Pillow: 16".
  • Elegant decorative pillows highlight the essence of this comforter set.
  • Beautiful Vintage Inspired Floral Design.
  • Care instructions: Dry clean preferred. Machine washable, use front loader machine (or top loader without agitator) to avoid Tearing, use Cold water in gentle cycle, tumble dry low heat, adding 2 tennis balls in the dryer will add fluffiness.
Check Stock

ATP Automotive Graywerks 101105 Exhaust Manifold

  • Manufactured to OE design ensuring manifold will line up and flow like the original unit.
  • High grade metallurgy resists fatigue cracking and breakage.
  • Precision machine finished providing smooth installation and leak free performance.
  • Upper and lower flange gaskets along with lower flange hardware are included (Heat shields and plugs are included where needed).
  • Industry Leading Limited Lifetime Warranty.
Check Stock

ATP Automotive Graywerks 101321 Exhaust Manifold

  • Manufactured to OE design ensuring manifold will line up and flow like the original unit.
  • High grade metallurgy resists fatigue cracking and breakage.
  • Precision machine finished providing smooth installation and leak free performance.
  • Upper and lower flange gaskets along with lower flange hardware are included (Heat shields and plugs are included where needed).
  • Industry Leading Limited Lifetime Warranty.
Check Stock

uxcell 5/16\-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance

  • Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

Chic Home 9 Piece Aubrey Decorator Upholstery Comforter Set and Pillows Ensemble, Queen, Beige

  • Care instructions: Dry clean preferred. Machine washable, use front loader machine (or top loader without agitator) to avoid Tearing, use Cold water in gentle cycle, tumble dry low heat, adding 2 tennis balls in the dryer will add fluffiness.
  • 1pc Comforter with Faux silk pleated flange: 92×96″ , 2pc Pillow Sham: 20×26+2″ , 2pc Euro Shams Faux Silk: 26×26+1.5 inch Flange, 1 Bed skirt pleated faux silk: 60×80+15″ , 1pc Cushion: 18×18″ , 1pc Rectangle Pillow: 12×18″ , 1 Round Pillow: 16″.
  • Beautiful Vintage Inspired Floral Design.
  • Elegant decorative pillows highlight the essence of this comforter set.
Check Stock

Planetary Gearbox Nema 23 Ratio 10:1 Gear Head Speed Reducer 1/4\ Input fit for 6.35mm Shaft Stepper Motor CNC Router Lathe DIY(10:1)

  • ★Input shaft hole is 1/4" that can match the 6.35mm shaft motor (without key). The output shaft diameter is 14mm.
  • ★The gear head has Nema 23 Input & output flange,suitable for flange 57mm stepper motor and other motors which can completely match the installation size ..
  • ★Rated speed is 3000RPM, 10:1 gear ratio ,the rated holding torque is 15N.m and the Max. holding torque is 25N.m.
  • ★4pcs screws provide for installation , small size gearbox , very convenient for the machine which has limited space for a gearbox..
  • ★Widely used on kinds of machine , lathe ,engraving machine etc..
Check Stock

Chic Home 9 Piece Aubrey Decorator Upholstery Comforter Set and Pillows Ensemble, King, Blue

  • 1pc Comforter with Faux silk pleated flange: 110x96" , 2pc Pillow Sham: 20x36+2" , 2pc Euro Sham Faux silk: 26x26+1.5 inch Flange, 1 Bed skirt pleated faux silk: 78x80+15" , 1pc Cushion: 18x18" , 1pc Rectangle Pillow: 12x18" , 1 Round Pillow: 16".
  • Elegant decorative pillows highlight the essence of this comforter set.
  • Beautiful Vintage Inspired Floral Design.
  • Care instruction: Machine washable, use front loader machine (or top loader without agitator), use Cold water in gentle cycle, tumble dry low heat, adding 2 tennis balls in the dryer will add fluffiness. The digital images we display have the most accurate color possible..
Check Stock

Chic Home CS4611-AN 9 Piece Aubrey Decorator Upholstery Comforter Set and Pillows Ensemble, King, Gold

  • 1pc Comforter with Faux silk pleated flange: 110x96" , 2pc Pillow Sham: 20x36+2" , 2pc Euro Sham Faux silk: 26x26+1.5 inch Flange, 1 Bed skirt pleated faux silk: 78x80+15" , 1pc Cushion: 18x18" , 1pc Rectangle Pillow: 12x18" , 1 Round Pillow: 16".
  • Elegant decorative pillows highlight the essence of this comforter set.
  • Beautiful Vintage Inspired Floral Design.
  • Care instructions: Dry clean preferred. Machine washable, use front loader machine (or top loader without agitator) to avoid Tearing, use Cold water in gentle cycle, tumble dry low heat, adding 2 tennis balls in the dryer will add fluffiness.
Check Stock