Categories

Best Btr Stage Cam G8

BRIAN TOOLEY BTR Turbo LS Stage 2 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods - LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrod Specs are: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 1 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft and Spring Set)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit and 7.400" Chromoly Pushrods.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Steel Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • When the combination calls for something a little milder, the stage 1 is where to look..
  • It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock

Brian Tooley BTR Turbo LS Stage 1 Cam, Spring Kit with Titanium Retainers, Chromoly Pushrods and Install Gasket Kit LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft, Spring Set and Gasket Kit)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit, Pushrods and Install Gasket Kit.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Titanium Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • Includes CAM INSTALL GASKET KIT, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, LS CRANKSHAFT DAMPER BOLT.
  • When the combination calls for something a little milder, the stage 1 is where to look. It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock

Brian Tooley Racing BTR Stage 3 Turbo Camshaft for Chevrolet GM Gen III LS1 LS2 LQ4 LQ9 Engines (Cam, Springs, Pushrods, & Install Kit)

  • BTR CAMSHAFT - LS - TURBOCHARGED STAGE 3 - 33035144R1.
  • Camshaft Specs: 230/235 .616"/.614" 114+4.
  • Add a BTR Dual Springs Kit with Steel Retainers, Hardened Pushrods, or an install kit that includes a GM crank bolts and front cover gasket set..
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 4 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Camshaft, BTR Platinum Dual Springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are 234/239 .612"/.610" 115+5 and comes a 3 bolt timing gear pattern.
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrod Specs are: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

Hillsound BTR Stool for Ultralight Backpacking & Hiking, Lightweight Camping Chairs, Compact Portable Outdoor Seat

  • AUTO LOCKING SYSTEM: Simply unhook, extend, and twist legs to employ the PhantomLock technology and you’re ready to take a seat in under 10 seconds! The BTR Stool is the ultimate lightweight, compact tripod stool for all your outdoor adventures..
  • USE CASE: The BTR is always Better Than a Rock! It’s Lightweight, aluminum alloy materials, convenient folding design, removable seat and telescoping poles make the BTR an ideal, comfortable portable seat for camping, hiking, backpacking, kayaking, fishing, hunting, beach trips & outdoor festivals..
  • ULTRALIGHT WEIGHT PORTABILITY: Weighing less than 15 oz. the BTR Stool easily packs to the size of an umbrella and stores inside the side pocket of a knapsack or backpack, camera bag or bottle cage on a bicycle..
  • DURABILITY: Strong, high-quality materials like aerospace grade 7001 aluminum alloy give the BTR a load capacity of 240lb (110kg). Removable 100% Nylon mesh seat easily detaches with the use of the unique seat tabs, simply twist to remove. 100% Nylon fibers are hardwearing and resist wear and tear..
Check Stock

FiiO BTR7 Headphone Amp Bluetooth Receiver High Resolution Portable DAC Supports MQA/LDAC/aptX HD 384K/32Bit DSD256 for Phone/PC/Car/Home Audio

  • [Support hi-res Bluetooth format]: BTR7 bluetooth amplifier supports Bluetooth 5.1, LDAC/aptX Adaptive/aptX LL/aptX HD/aptX/AAC/SBC hi-res wireless....
  • [3.5mm+4.4mm dual output]: Widely compatible with the BTR7 headphone amps, this means a 4.4mm balanced headphone output in addition to the traditional....
  • [Lossless sound and support MQA]: The BTR7 bluetooth amps relies on the XMOS XUF208 chip to receive and decode audio data streams, with support up to....
  • [cVc 8.0 and built-in microphone]: BTR7 bluetooth amplifier supports cVc 8.0, supports Bluetooth voice call, supports earphones with CTIA in-line....
  • [High performance DAC]: Each of the left and right channels of the BTR7 bluetooth DAC is the ES9219C, which is paired with a low-pass filter and an....
Check Stock

FiiO Q1 Portable USB DAC Amplifier

  • [High-performance DAC ES9219C*2]: For extremely detailed reproduction of sound, stronger, better performance..
  • [Support full hi-res wireless Bluetooth format]: CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - the bluetooth amplifier BTR5 2021's Bluetooth version 5.0 supporting high-resolution formats such as AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC up to 96kHz, you can get a totally portable yet excellent sounding setup with your device!.
  • [Support MQA ]: A new addition to the updated BTR5 2021 bluetooth headphone amps is support for MQA Renderer, allowing for high-resolution, master-level sound quality in reasonably sized files well-suited for your mobile device. PS: Supports up to MQA 16x decoding with applicable music apps..
  • [XMOS XUF208 USB chip]: BTR5 2021 headphone amps is capable of asynchronous audio decoding under USB Audio Class 2.0. As a USB DAC, the BTR5 2021 portable amplifier can decode up to 384kHz sampling rate and native DSD. PS: USB DAC functionality supports 2 modes, driverless USB 1.0 and high-performance USB 2.0 ..
  • [More points/details]: 3.5+2.5mm dual outputs, cVc 8.0 noise cancellation, in-vehicle mode, OLED display, FiiO Music app, Dual crystal oscillators and USB Audio Adapter ....
Check Stock

BTR High Visibility Reflective Silver Ladies Cycling and Running Gilet & Vest. Size 10

  • BTR 100% Reflective High Visibility Womens Cycling and Running Gilet and Vest is a lightweight gilet that is made from reflective silver material, so you can be seen in the dark!.
  • Need a comfortable high visibility lightweight extra layer? BTR High Vis Totally Reflective silver gilet is a lightweight layer that has a mesh lining throughout & a back air vent to help ensure that you don’t stick to it if you are working up a sweat.
  • This ladies gilet and vest comes With 3 pockets - 2 external zipped side pockets and 1 rear zipped pocket you have plenty of places to carry your essentials.
  • An air vent across the back, mesh lining, soft lined neck & stretchy side panels lets you wear the BTR Silver Reflective Gilet in comfort. The totally reflective silver material shines when light hits it so you can mix comfort & high visibility in one!.
  • Be seen in the dark. Simply pop on our BTR Lightweight Be Totally Reflective Gilet to provide you with extra safety as our reflective material helps increase your safety in the dark. Generous sizing to allow for clothing to be worn underneath. See sizing..
Check Stock

Hillsound BTR Stool - Ultralight Camping / Hunting / Multipurpose Stool - 2 Year Warranty Black 17

  • EASY SETUP - Phantomlock technology locks the legs in place when spread out, no fiddling with mechanisms or clips.
  • ULTRALIGHT - The 14" BTR weighs in at only 12.2oz (346g).
  • PORTABLE - Lightweight materials with a telescoping and folding design make the BTR a seat you really can take anywhere.
  • BUILD STRONG - High quality materials like aerospace grade 7001 aluminum alloy give the BTR a 240lb (110kg) load capacity.
  • WARRANTY - This stool is built to last and are covered by a category leading two-year warranty.
Check Stock

Fiio E12 DIY Limited Edition Portable AMP HeadPhone Slim Amplifier

  • [High-performance DAC ES9219C*2]: For extremely detailed reproduction of sound, stronger, better performance..
  • [Support full hi-res wireless Bluetooth format]: CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - the bluetooth amplifier BTR5 2021's Bluetooth version 5.0 supporting high-resolution formats such as AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC up to 96kHz, you can get a totally portable yet excellent sounding setup with your device!.
  • [Support MQA ]: A new addition to the updated BTR5 2021 bluetooth headphone amps is support for MQA Renderer, allowing for high-resolution, master-level sound quality in reasonably sized files well-suited for your mobile device. PS: Supports up to MQA 16x decoding with applicable music apps..
  • [XMOS XUF208 USB chip]: BTR5 2021 headphone amps is capable of asynchronous audio decoding under USB Audio Class 2.0. As a USB DAC, the BTR5 2021 portable amplifier can decode up to 384kHz sampling rate and native DSD. PS: USB DAC functionality supports 2 modes, driverless USB 1.0 and high-performance USB 2.0 ..
  • [More points/details]: 3.5+2.5mm dual outputs, cVc 8.0 noise cancellation, in-vehicle mode, OLED display, FiiO Music app, Dual crystal oscillators and USB Audio Adapter ....
Check Stock

FiiO BTR7 Headphone Amp Bluetooth Receiver High Resolution Portable DAC Supports LDAC/aptX HD/MQA 384K/32Bit DSD256 for Phone/PC/Car/Home Audio (Comes with USB Type C to Lightning Cable)

  • [Support hi-res Bluetooth format]: BTR7 bluetooth amplifier supports Bluetooth 5.1, LDAC/aptX Adaptive/aptX LL/aptX HD/aptX/AAC/SBC hi-res wireless format..
  • [3.5mm+4.4mm dual output]: Widely compatible with the BTR7 headphone amps, this means a 4.4mm balanced headphone output in addition to the traditional 3.5mm single-ended headphone output - for a more detailed audio experience in a jack format now widely used..
  • [Lossless sound and support MQA]: The BTR7 bluetooth amps relies on the XMOS XUF208 chip to receive and decode audio data streams, with support up to PCM 384kHz and native DSD256. In USB DAC mode and with an MQA player, up to MQA 8x rendering is supported..
  • [cVc 8.0 and built-in microphone]: BTR7 bluetooth amplifier supports cVc 8.0, supports Bluetooth voice call, supports earphones with CTIA in-line controls..
  • [High performance DAC]: Each of the left and right channels of the BTR7 bluetooth DAC is the ES9219C, which is paired with a low-pass filter and an amplifier in a highly-optimized audio architecture that captures every last detail and dynamics in your music. And with support for MQA, your music will definitely come across clearly and boldly..
Check Stock