Categories

Best Budget Turntables

Tuneful Cables Sound Isolation Pads Cork Pads for Turntables to Reduce Vibration & Skipping 1 Pack of 4

  • ELEVATE YOUR TURNTABLE'S PERFORMANCE. Tuneful Cables Cork Isolation Pads for Turntables absorb unwanted vibrations so your turntable can focus on....
  • DESIGN IN MIND. Tuneful Cables Cork Isolation Pads for Turntables sit between your turntable and the surface it sits on providing shock absorption,....
  • WHAT’S INCLUDED. Included are 4 discreet cork pads measuring 2” x 2” x 7/8”. Easy to install with minimal effort, each adhesive-free Cork....
  • FITS MOST DEVICES. Each supporting pad fits under most HIFI systems. Perfect for Subwoofers, Turntables, and Other Audio Equipment. To install, simply....
  • SIMPLE AND EFFECTIVE. Tuneful Cables Cork Isolation Pads for Turntables help eliminate the subtractive effect of unwanted resonances as well as the....
Check Stock

Goldring 1042 MM Moving Magnet Phono Cartridge

  • ...g 1042 is a cartridge for the audiophile who demands the ultimate performance from his system. The extended groove contact of it's Gyger S diamond gives the 1042 unsurpassed resolution of fine groove modulations, producing exceptionally detailed, smooth and musical sound quality. A good moving magnet for mid-budget turntables..
  • The Goldring 1000 series are advanced moving magnet designs that embrace all the advantages of modern phono-cartridge technology, including improved tracking ability and user-replacement stylus assembly allowing the immediate replacement of worn or damaged Styli..
  • The four 1000 Series cartridges all share the same strong, one-piece body made from Pocan, an ultra-rigid glass-reinforced polyester. All fixed parts can be held securely in place and the body can be tightly bolted to the headshell..
  • The 1000 Series are each endowed with a highly efficient magnetic circuit which makes for a smooth and extended frequency response. As with all Goldring cartridges, the 1000 Series is rigorously tested to ensure optimum standards of performance and reliability..
  • Frequency Response: 20Hz-20kHz±3dB Channel Balance: 2dB @ 1kHz Channel Separation: 25dB @ 1kHz Sensitivity: 6.5mV±1.5dB, 1kHz @ 5 cm/sec Static Compliance: 24mm/N lat., 16mm/N....
Check Stock

Pro-Ject Juke Box S2 Audiophile All-in-One Plug & Play Turntable System Walnut

  • The secret weapon for audiophiles looking to maximize their turntable experience. Durable silicone rubber provides a 11.75" flat, non-scratch surface.
  • Hear your records exactly as the artist intended. The dampening qualities ensure your records remain isolated from unwanted platter micro-vibration....
  • Recessed center allows LPs to lay flat on the turntable regardless of label thickness to maintain the integrity of the record during playback.
  • Compatible with all turntables. It can be used on all standard 12'' turntable platters and will conform to your turntables spindle.
  • Pair with Fluance RT80/81 high fidelity belt driven turntables and create a pure analog listening experience..
Check Stock

Kingjinglo Durable Project Music Hall Anti-Skate Weight with Nylon Thread for Tonearm Vinyl Record Accessories

  • Made of high quality metal material, durable to use, light weight, easy to carry..
  • The Anti-Skate Weight is attached to a thin fishing wire that hoops onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop..
  • This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination to 'skip' or 'skate'..
  • This is a straight replacement if your anti skating weight is damaged or lost..
  • This weight works with all current Music Hall Turntables, some previous generation Music Hall turntables and some Pro-ject turntables models..
Check Stock

Wondiwe Anti Slip Weight, Durable Project Music Hall Anti-Skate Weight with Nylon Thread for Tonearm Vinyl Record Accessories

  • ★The Anti-Skate Weight is attached to a thin fishing wire that hoops onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop..
  • ★This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination to 'skip' or 'skate'..
  • ★This is a straight replacement if your anti skating weight is damaged or lost..
  • ★This weight works with all current Music Hall Turntables, some previous generation Music Hall turntables and some Pro-ject turntables models..
Check Stock

Sara-u Durable Project Music Hall Anti-Skate Weight with Nylon Thread Compatible for Tonearm Vinyl Record Accessories

  • ★Made of high quality metal material, durable to use, light weight, easy to carry..
  • ★The Anti-Skate Weight is attached to a thin fishing wire that hoops onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop..
  • ★This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination to 'skip' or 'skate'..
  • ★This is a straight replacement if your anti skating weight is damaged or lost..
  • ★This weight works with all current Music Hall Turntables, some previous generation Music Hall turntables and some Pro-ject turntables models..
Check Stock

XISAOK Durable Project Music Hall Anti-Skate Weight with Nylon Thread for Tonearm Vinyl Record Accessories Anti-Skate Weight Silver

  • ㊥ Made of high quality metal material, durable to use, light weight, easy to carry..
  • ㊥ The Anti-Skate Weight is attached to a thin fishing wire that hoops onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop..
  • ㊥ This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination to 'skip' or 'skate'..
  • ㊥ This is a straight replacement if your anti skating weight is damaged or lost..
  • ㊥ This weight works with all current Music Hall Turntables, some previous generation Music Hall turntables and some Pro-ject turntables models..
Check Stock

Audio-Technica .7mil Conical Uni Mount Cartridge

  • Channel Separation: 24/15 (dB at 1 kHz/10 kHz).
Check Stock

ION Turntable Cartridge Replacement

  • For Use With Ion Ttusb, Ion Ttusb10, Lp Dock, Lp 2 Cd & Lp 2 Flash Turntables.
  • Compatible With A Variety Of Ion Turntables.
  • Perfect as a replacement or keeping as a backup.
  • Diamond-tipped, Moving Magnet (MM) Stylus.
Check Stock

Bozak Madisson Phono Preamp Preamplifier, Turntable Amplifier Pre-Amp

  • Converts Phono signals to Line Level utilizing standard RIAA equalization.
  • Works with all turntables using magnetic cartridges.
  • Has designated grounding screw for your turntables ground wire.
Check Stock

Original AT3472P better than AT3482P AT81CP cartridge

  • Industry Standard, original AT3472P cartridge used by many turntables manufacturers for Sound Quality, Performance, and Value.
  • Aluminum alloy cantilever for accurate transmission of record groove modulations.
  • Later models (AT3482P, AT81CP) tried to emulate AT3472P but failed due to cost constraints.
Check Stock

CoRkErY Cork N Rubber Turntable Platter Mat -1-8 - Audiophile Slipmat

  • Compatible with all turntables. Use on all standard platters, conforming to the turntables spindle.
  • Item Size: 7inch diameter, 2mm thickness. Made from silicone rubber composite, providing a 7 inch diameter flat, scratch and slip resistant surface.
  • Upgrade or replace turntable slip mat pad for any existing felt, rubber or OEM turntable platter mat.
  • Hear your records exactly as the artist intended. The dampening qualities ensure your records remain isolated from unwanted platter micro-vibration....
  • Order with No worry: Just try our products and if you don’t absolutely love them let us know ..
Check Stock

sdroceRyaM Headshell Cartridge Turntable Vinyl Record Player DJ Audio Equipment and Accessories

  • Package contents :1 headshell base - silver + 4 copper leads.
  • Non-magnetic, lightweight and durable high-quality zinc alloy, 4-color OFC soft leads with gold-plated terminals..
  • Electronic turntable head housing for electronic turntables and other turntables, s-shaped or straight turntable arms, gold-plated 4-pin contacts..
  • Note: Cartridge terminals are marked with R +, R-, L + and L-4 pin wiring and must be installed yourself. Wiring :R+ = red, R- = green, L + = white, L- = blue.
Check Stock