Best Buggy Board Extra Connector Kit
Acorn Baby Universal Stroller Board - 17.2 x 7 x 1.5in Black Quick Snap On and Off Attachable Stroller Standing Board
- [Steer Your Little Ones]: Build your youngster’s confidence out of the stroller while keeping an eye on them with Stroller Rider Board.
- Connects to the rear axle of the pram and two anti-shock wheels guide the stroller glider board as you steer.
- [Stabilize Your Ride]: Fitted with traction ridges, the stroller stand board offers a non-slip grip to secure your kiddo in place.
- With a 7-inch (18cm) clearance, your little one can easily reach the stroller’s handle for stability.
- Glider board stroller attachment can hold up to 45lbs (720oz).
- [Easy to install]: Attach the left and right joints onto the stroller buggy board.
- Use the buttons to rotate joints to your desired height.
- Included joint lever allows you to adjust the stroller extension board 2 to 6 inches (5-15cm) from the pram.
- [Store When Done]: Connector pins attaches to the left and right joints and fastens directly onto the stroller.
- When not in use, use the storage strap to buckle the ride along board stroller glider to your pram.
- [Package Contents]: Package includes a black 17.2 x 7 x 1.5-inch (44 x 18 x 4cm) stroller step board, left and right joints, wheels, knob, left and right connection pins, adaptor, storage straps, and wheels with washers.
- Comes unassembled but incudes instructions.
Check StockHonhill Mini Buggy Board with Seat Standing Board for Baby Jogger Travel Pram Pushchair Removable Connector Seat and Assembling (Pink)
- FOR 2-6 YEARS OLD CHILD USE: Buggy board seat fits for 2-6 years old children, having a maximum loading capacity 25kg / 55.12LBS. Saving much attention in taking care two children when going outside..
- REMOVABLE SEAT: If your child is tired of seating on the board, he can comfortably stand on the longer non-slip pedal. No more dissatisfaction from the child when getting out with them..
- SPECIFIC DESIGN: Buggy board wit seat is recommended for the strollers that have a horizontal shaft at the rear wheel. The length of the horizontal shaft is greater than 23cm, and the height of the horizontal shaft from the ground is recommended to be 12-17cm. The diameter of the horizontal axis cannot exceed 2.5cm..
- STRONG LOCKING: The connection between the buggy board and the stroller is firmly connected, locking the wheel frame to avoid loosening, offering an extreme protection to the baby..
- DECENT SERVICE: Easy to mount and operate. Your purchase is fully protected when ordering it today. If you have any concern, please feel free to contact us..
Check StockHonhill Mini Buggy Board with Seat Standing Board for Baby Jogger Travel Pram Pushchair Removable Connector Seat and Assembling (Black)
- FOR 2-6 YEARS OLD CHILD USE: Buggy board seat fits for 2-6 years old children, having a maximum loading capacity 25kg / 55.12LBS. Saving much attention in taking care two children when going outside..
- REMOVABLE SEAT: If your child is tired of seating on the board, he can comfortably stand on the longer non-slip pedal. No more dissatisfaction from the child when getting out with them..
- SPECIFIC DESIGN: Buggy board wit seat is recommended for the strollers that have a horizontal shaft at the rear wheel. The length of the horizontal shaft is greater than 23cm, and the height of the horizontal shaft from the ground is recommended to be 12-17cm. The diameter of the horizontal axis cannot exceed 2.5cm..
- STRONG LOCKING: The connection between the buggy board and the stroller is firmly connected, locking the wheel frame to avoid loosening, offering an extreme protection to the baby..
- DECENT SERVICE: Easy to mount and operate. Your purchase is fully protected when ordering it today. If you have any concern, please feel free to contact us..
Check StockRobots
- Unleash hours of fun with the LEGO Off-Road Buggy (42124) building kit. This RC Off-Road Buggy car is packed with features inspired by the original....
- Amazing tricks are easy to perform thanks to the car’s front and rear suspension, massive tires and angled front.
- Download the free CONTROL+ app to add a new dimension to this remote-control buggy. Use the app to control the car, perform stunts and unlock....
- This Off-Road Buggy is an awesome gift for kids aged 10 and up. Adults who remember the classic 1980s RC toy cars will love it too, making it a fun....
- Check out the retro color scheme, complete with 1980s-inspired sticker details.
Check StockMaclaren Starter Kit- Essential Stroller Accessories to get You on Your Way. A Universal Organiser, Universal Seat Liner, Cupholder. Fits on All Maclarens and Most Umbrella-fold Stroller Brands.
- The Starter Kit has three accessories, including a Seat Liner to customize your buggy with a universal fashion forward seat liner, that fits all Maclaren buggies..
- The Starter Kit has three accessories, including a Universal Black Organizer, a fashionable hold-all that fits all Maclaren single buggies..
- The Starter Kit has three accessories, including a Cup holder a must-have buggy essential that affixes easily and securely to every Maclaren buggy frame..
- Accessories included in the Starter Kit fits most umbrella fold buggies..
Check StockGRR-RIPPER Complete Double Pack Limited Addition by MICROJIG
- Two-Pack. Each GRR-Ripper Advanced 3D Complete kit includes a GRR-Ripper Advanced 3D Pushblock, 1/8" Leg Accessory, a Gravity Heel Kit, a Handle Bridge Kit, and a Deflector/Connector Kit..
- GRR-Ripper Advanced 3D Pushblock features Micro Jig's proprietary non-slip Green GRR-RIP textured gripping surface for greater control.
- 3 legs for multi-directional stability and control.
- a stabilizing plate to lock your material against the fence to keep your work square and flush.
- an adjustable spacer that gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts.
- and an adjustable handle for maximum comfort..
- GRR-Ripper 1/8" Leg Accessory attaches to pushblock body or side leg to allow for safe, accurate, and consistent ripping of 1/8" thin strips. Gravity Heel Accessory features auto-retracting technology for reducing blowout. Provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. Includes 5 heels, 2 heel spacers and mounting hardware..
- Gravity Heel Accessory features auto-retracting technology for reducing blowout. It provides a....
Check StockSunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board
- For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
- Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
- 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
- Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
- Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check StockAIR LIFT 25804 Air Shock Controller Kit
- Allows driver control for air shock pressure right from the driver seat.
- Universal connector for most air shocks including factory installed.
- Includes dash mount gauge panel and hardware and air line.
- Easy to installDescriptionAIR LIFT Air Shock Controller Kit is designed to control the air shock pressure. It includes rugged on board air compressor and dash mount gauge panel as well as hardware. This kit facilitates easy and quick installation..
Check StockS&S Cycle 550-0501 HI-4N Ignition Module
- Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
- 12 Volt Coil+5 PIN CDI BOX+4 PIN Regulator+Solenoid Relay+Spark plug.Fits ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more..
- This kit include 2-pin Male Plug Relay,Ignition Coil 135 Degree Elbow,12v 4-pin Voltage Regulator,5-pin CDI. (Does Not fit for GY6 engine)..
- The kit Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
- The items are the same as the pictures.5 Pins CDI module + 2Wire Ignition Coil + Starter Relay Solenoid + 4 PIN Voltage Regulator Rectifier + Spark Plug. Fits for: 50cc 70cc 90cc 110cc 125cc 140cc horizontal engine,Bikes & Quads,ATV, Buggy's..
Check StockRazor Electrical Kit For Dune Buggy V1+ Drifter V1+ Go Kart V13+
- Razor 24 Volt 30 Amp 6 Pin Electrical Kit which consists of one 6-wire thumb trigger throttle and one control module.
- Razor Ground Force Drifter (All Versions) - Razor Ground Force Go Kart (Versions 13+ ) - Razor Dune Buggy (All Versions).
- 6-Pin Electrical Kit for the following Razor models: Dune Buggy, V1+ Ground Force Drifter, V1+ Ground Force Go Kart, V13+ Note: Model versions can be....
Check StockDupont Connector Kit - 1004pcs Crimp Connector Kit with 2.54 mm Crimp Pin Connector Housings, Single Row Male Headers, Male/Female Crimp Pins and Ribbon Cable from Plusivo
- Complete Dupont Connector Kit: This kit includes different types of connectors such as single row pin headers, bent pin headers, colored pin headers, crimp pin connector housings, and male & female crimp pins for wires..
- Premium Quality Dupont Connectors: High-quality crimp pin connector housings made of durable plastic and metal tin plated pins with internal pure copper for increased conductivity..
- More than 1000 Dupont Connectors and Crimp Pins: Create custom breadboard jumper wires and circuit board wire connections using the wide selection of parts included in this kit..
- Durable Plastic Storage Box: All the items are packed inside a durable plastic box with adjustable compartments to organize all the components as desired, either by type or by size. Bring your kit anywhere and keep the dupont connectors free from damaging and breaking..
- Satisfaction Guarantee: Our connector assortment box is backed by our manufacturer 30-day money back guarantee.
Check StockUniversal Stroller Board 2-in-1 Buggy Board with Detachable Seat Standing Board, Rider Stroller Glider Board Suitable for Most Brands of Strollers, Holds Children Up to 55lbs
- 【UNIVERSAL STROLLER BOARD】: TINY GOGO Stroller board uses advanced Velcro to connect almost all brands of stroller firmly in a few seconds. Rotary buttons can adjust the horizontal angle of the pedal to adapt different height strollers. Adjust the connector rods to change the walking space-max distance is 13in according to the stroller width, which could make child have enough space to stand or sit on it, parents always can hold the stroller handle to control its direction..
- 【2-IN-1 STROLLER RIDER BOARD】: The universal stroller board designs with a detachable seat for choosing to stand or sit on the it to meet their whim, standing platform has a non-slip surface to enable baby’s safety. Cute tiger pattern with bright color could add interest and preference to ride it, easily finding it in the crowded people during the out time. 2-in-1 glider board also perfect for twins double stroller to meet the demand of above 2 children travel and bring big convenience for you..
- 【OVERSALL FLEXIBLE & COMFORT DESIGN】:The detachable cushioned seat would make toddler feels comfortable in journey. Smooth and flexible wheels save your strength and energy to move the stroller by adjusting the direction of rotate easily according to road. With the functiona....
Check StockLEGO Technic Off-Road Buggy 42124 Model Building Kit App-Controlled Retro RC Buggy Toy for Kids New 2021 374 Pieces
- Unleash hours of fun with the LEGO Off-Road Buggy (42124) building kit. This RC Off-Road Buggy car is packed with features inspired by the original....
- Amazing tricks are easy to perform thanks to the car’s front and rear suspension, massive tires and angled front.
- Download the free CONTROL+ app to add a new dimension to this remote-control buggy. Use the app to control the car, perform stunts and unlock....
- This Off-Road Buggy is an awesome gift for kids aged 10 and up. Adults who remember the classic 1980s RC toy cars will love it too, making it a fun....
- Check out the retro color scheme, complete with 1980s-inspired sticker details.
Check Stock