Categories

Best Build Surface Sheet

HICTOP Upgrades Flexible Build Plate PEI Steel Sheet Textured Bed Works for CR-10 CR-10S CR-10S pro CR-10 V2 V3 and Other Same Sized 3D Printers 310 * 310

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for....
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.....
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives.....
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges....
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

Dremel 3D Printing BT20-01 Build Sheets (Pack of 3)

  • Durable - Each sheet lasts up to 100 builds.
  • Convenient - Single sheet allows for quick application of a bubble-free surface.
  • Custom sized - To fit and protect your Dremel Idea builder build plate.
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 220mmx220mm 8.7 x 8.7 with Premium Adhesive 0.5 Grid for 3D Printers MK2 MK2A MK3 Anet A8 Anet A6 Pack of 4

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for....
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.....
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives.....
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges....
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

Wisamic Borosilicate Glass Plate Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, etc

  • 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use..
  • Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface..
  • High binding power when heating. Easy to separate the plastic parts when cooling..
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage..
  • Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, etc.
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood,....
Check Stock

PEI Sheet Magnetic Bed Flexible Spring Steel Platform with 3M Adhesive, 220x220mm（8.66 8.66inch) for Anet A8, A6, Robo R2, Wanhao Duplicator6, Duplicator i3 Monoprice Maker 3D Printers.

  • 【Quality Materials】: The PEI magnetic build plate is 3-Layer Materials . The flexible spring steel platform in the middle, covered with smooth PEI surface on it, and authentic 3M Magnetic Adhesive at the bottom are stable and durable.The maximum temperature for printing is 130℃ on the bed. Don't worry about the prints curling with a 60℃ bed temperature..
  • 【Proven Solution】: No glue, No tape, PEI printed bed with authentic 3M has strong adhesion.
  • No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new..
  • 【Reuse For Multiple Prints】: Prints easily moved if bend the Magnetic plate when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new..
  • 【Practical Features】: Flexible, removable, high strength and heat resistance, good adhesion to PLA and ABS,220x220mm PEI sheet size is suitable for Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus Monoprice Maker and similar size 3D printers..
  • 【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a....
Check Stock

Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface

  • 【Quality assurance】100% Official Creality 3D printer PEI Sheet 310*320mm removable magnetic flexible Texture heated bed platform. Gold PEI surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability..
  • 【Wide Application】Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds..
  • 【Great Adhesion & Easy Take Mold】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!.
  • 【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the ....
Check Stock

BIQU Flexible Removable PEI Steel Sheet Heated Bed with Magnetic Sticker 220x220mm, Build Surface Platform for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer

  • Suitable for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer Original Removable PEI Steel Sheet Heated Bed..
  • Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take..
  • Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board..
  • High temperature resistance: Withstand temperature above 200 ℃..
  • After-sales support: If you encounter any problems, please write us via Amazon-Email. We are happy to answer all your questions..
Check Stock

Learn To Snowboard: For Beginners

  • ...ability. It eliminates the slow, suction cup feel that comes with one-dimensional base finishes.Helps eliminate snow build-up while touring up and riding down..
  • EXTRUDED POLYMER SPEED TX BASE - The fast and hard speed TX Extruded base. It provides the most impact resistant surface available and its high-density molecular structure holds wax longer for sustained speeds..
  • ULTIMATE TRACTION - This small counter radius (bump) placed in the middle of the board’s sidecut improves edge hold without creating drag or strange edge grip. It adds extra bite on ice and turns regular turns into confident carves..
  • SANDWICH CONSTRUCT - Camber snowbaord , Biaxial fiberglass , ABS Side Wall , Components: 100% Real Poplar combined Wood Core, Rubber dampening strip in side, Steel edge side wall, Extruded speed TX base, Ridged Top & Bottom Sheet (scratch resistant).Rider's level : Beginner,Flex :6/10.
Check Stock

Hestan OvenBond Collection Stainless Steel Baking Sheet Set, 5 Piece

  • SUPERIOR PERFORMANCE: Triple-bonded, 18/10 stainless steel ovenware set features an aluminum core for greater, even heat conductivity.
  • INCOMPARABLE BEAUTY: Hestan Culinary OvenBond ovenware set boasts a brushed stainless steel baking surface and polished exterior that brings a sleek look to the modern kitchen.
  • WARP-RESISTANT: Tri-ply clad stainless steel baking pans are thermal tested and engineered to be warp-resistant, maintaining their shape for a lifetime of oven baking and roasting.
  • OVENWARE SET INCLUDES: 18-inch x 13-inch half sheet pan with cooling rack, 9-inch x 12.5-inch quarter sheet pan, 9-inch x 13-inch rectangular baker, and an 8-inch x 8-inch square baker.
  • HOW TO CLEAN: Provisions is dishwasher safe. Over time, stainless steel may stain due to oil build up. Any staining or residue can be scrubbed with the powder version of Barkeeper's friend and a soft scrubber..
Check Stock

Gator MicroZip Sander Kit, Assorted Grits

  • This pack of assorted grit sanding sheets will help take you through the steps of achieving the perfect final finish on your refinishing project.
  • The hook and loop backing makes changing sanding sheets quick and easy.
  • Made with premium P-grade aluminum oxide grain, which creates a consistent scratch pattern and helps create a finer final finish.
  • The high-density foam is durable, light-weight, and provides a cushioned sanding surface for exceptional comfort.
  • Resin coating locks the grain to the paper, and help to resist build-up and humidity increasing the life of the sandpaper sheet.
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock