Categories

Best Building Angle Steel Iron

CGOLDENWALL 1200W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger for Steel Plate Angle Steel Plate Iron Plate Aluminum Plate CE&ROHS Certificate

  • [FAST ELECTRIC PUNCHING] 1200W High Power, Punching speed is as fast as 2-3 seconds.
  • [ACCURATE POSITIONING,NO OFFSET] It is a electric hydraulic puncher applied for drilling of copper, aluminum, steel, iron plate, 4 to 6 # angle, etc. Wide Wide punching range: Iron/steel plate≤0.23 Inch, Copper/ aluminum plate≤0.31 Inch, Angle iron≤ 0.23 Inch.
  • [EASY TO OPERATE] One-button start,regular punching surface, no burrs ,and great saving labor and improving punch speed.Two kinds of working mode, Install the base and work on the platform,Or install the auxiliary handle and hold it for worktorized, labor saving effectiveness.
  • [DURABLE AND RELIABLE QUALITY] Steal punching head,High strength and durable switch key,Detachable strong base,Thicker steel body, with better stability and longer service life.
  • [APPLICATION] Used in punching on steel plate, angle steel plate, iron plate, aluminum plate, U-steel etc..
Check Stock

18pc HD Heat Treated Dent Puller w/13lbs Slide Hammer Auto Body Shop Repair Tool

  • ... 【Easy to Carry】 Comes with a durable plastic storage case, you can neatly collect the tools and easily bring them anywhere you like.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
Check Stock

8MILELAKE Auto Truck Dent Puller Tool Set with 10lbs Universal Slide Hammer 13pc Dent Repair Tool

  • 【Applications】This dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
  • 【A Storage Case】Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist abrasion.
Check Stock

Little Giant WST1-3048-36 Welded Steel Workbench with Open Base, 5000 lb. Load Capacity, 36\ x 48\ x 30\

  • Welded steel workbench with open base and 5,000 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
Check Stock

Kapler Rolling Snow Pusher, 29'x19'Snow Shovel with Wheels Driveway, Hand Push Pavement Snow Removal Tool

  • Wear-resistant adhesive tape is used to contact the ground to prevent scratches, protect the ground and reduce wear, better for push the snow shovel with wheels..
  • Not Just For Snow Remove: The rolling snow pusher can be for driveway or pavement snow movement, airport snow clearing, factory building, yard snow cleaning. The snow shovel with wheels also can be used for shoveling grain in the harvest season.
Check Stock

9' L Reciprocating Saw Blade, 5 pk.

  • 10 TPI, 9 in. Length, Bi-Metal Construction.
  • 1/2 in. Universal Tang fits all Sawzalls.5 blades per pouch.Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.Limited warranty.
  • 1/2 in. Universal Tang fits all Sawzalls.
  • Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

5 Pack Heavy Duty Stair Handrail Bracket Stainless Steel Banister Rail Mounting Handrail Wall Brackets Stair Hardware

  • PREMIUM STAINLESS STEEL - Made of high-quality 304 stainless steel, durable and stability structures provides a reliable and long wearing solution for you..
  • SIZE - The sise of handrail bracket is 2.36inch/60mm x 2.36inch/60mm for angle construction.The diameter of round base is 2 inch, Handrail Plate: 1.97*1.19 inch..
  • EASY INSTALLATION - Just need a driller and a screwdriver to install the handraill bracket onto the wall.Maximum extent to keep the beautiful appearance and revolutionizing your home..
  • WIDE APPLICATION - Because of its premium quality and abundant accessories provided, it is a perfect handrail hardware for DIY home improvement,staircase handrail, shopping malls guardrail facilities, building fire corridors, handrails, corridors, building handrails, indoor and outdoor handrail, staircase, stainless steel parts.
  • PACKAGE INCLUDED: 5 Pack 304 stainless steel handrail brackets + 15PCS 304ss long strews and expansion tubes included..
Check Stock

General Tools T-Bevel Gauge & Protractor #828 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • PREVENT WASTE: This digital 5” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements..
  • CORNER ANGLE FINDER: Digital angle gauge includes an LCD reader, makings measurements easy to read, while the innovative center check notch enables exact ruler placement markings. Use the electric meter for custom cuts and crown molding..
  • LEVEL RULER: This tool is ideal for finding angles in tight spots, and with the lock feature, the user can improve accuracy and save time when finding the measurement. It's perfect for doing work on framing, custom furniture building, and flooring..
  • PROTRACTOR WITH SWING ARM: Our stainless steel digital angle finder with measuring ruler has a built-in reverse angle function for usability and convenience. It's an essential tool and a great gift idea for a fellow carpenter, student, or machinist..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Outdoor Hand Rails for Steps 1-3 Step Handrail,Wall&Floor Mounted Wrought Iron Handrails Stair Rail with Installation Kit Hand Rail for Outdoors Steps

  • ...riendly Design for the old, child, disabled, pregnant woman, after-surgery people and so on. Sturdy stair rail serves as a support to help people get up and down the steps easily and safely. This modern indoor outdoor hand rails can be installed on steps and staircases for patio, balcony, porch, garden, residential building, commercial office building, hotel, garage etc.
Check Stock

Little Giant WST2-3060-36 Welded Steel Workbench with Lower Shelf, 4500 lbs Load Capacity, 36\ Height x 60\ Width x 30\ Depth

  • Welded steel workbench with lower shelf and 4,500 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

Little Giant WST2-3672-36 Welded Steel Workbench with Lower Shelf, 4000 lbs Load Capacity, 36\ Height x 72\ Width x 36\ Depth

  • Welded steel workbench with lower shelf and 4,000 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock