ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt
- KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4x5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature.
- Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
- IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
- Increases engine longevity and extends transmission life.
- EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
- Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
- BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
- Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
- Power cord stays attached : not removable.
- FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any ....
Check Stock
BILT HARD 420cc 15HP Gas Engine with Electric Start, Horizontal Shaft 4 Stroke OHV Gas Motor, Gas Powered Multi-Use Engine
- POWERFUL ENGINE - Our 420cc displacement 4-stroke horizontal cylinder gas engine has a max torque of 19.56ft.lbs @2500RPM, max 3600 RPM speed, 15 maximum horsepower, 1.7 gal fuel tank. Built to meet & exceed industrial grade quality standards & provide dependable performance. The engine is shipped dry so make sure you add gasoline and engine oil correctly before starting (not included)..
- SHAFT SPECS - 1 in Diameter, 3.48 in Length, end tapped with 3/8 in.-24 UNF.
- Mounting pattern 7.7L x 4.06W-4.09W in. Durable design runs quiy and provides smooth operation.This engine spark plug system can take Torch: F6TC spark plugs, with a clearance of: 0.027-0.0.31 in. The engine runs on a minimum 87+ unleaded gasoline (10%003e ETHANOL recommended)..
- SAFETY & WIDELY APPLICATIONS - Built-in Force Air-Cooled and Splash Lubrication System, keeping the motor cool during extended use of time and ensure the operator's safety. A low oil shutoff functionality turns the engine off to prevent serious damage or failure. It's the perfect replacement engine for a pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers..
- GREAT REPLACEMENT - Our 420cc 15HP Horizontal Engine is a great replacem....
Check Stock
Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook
- 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
- 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
- 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
- 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock
Dayco 89338 Automatic Tensioner Assembly
- ...7, ACDelco 38357, CARQUEST 38357, NAPA 38357, Ford 3M5Z-6A228-AE, Goodyear 49397, Motorcraft BT-107, Mazda.
- REDUCE VIBRATIONS: Between smooth belt routing and accurate tensioning, the tensioner assembly assists in vehicle air conditioning compressors, alternators, power steering pumps, water pumps, and other various engine accessories that are critical to vehicle performance. This heavy-duty, wear-resistant Drive Belt Tensioner Assembly is an exact OE replacement designed to reduce wear, friction, vibration, and harshness.
- EXTEND SERVICE LIFE: These assemblies feature smoother surfaces and tighter dimensional tolerances to prolong belt life. Lubricated bearings and high temperature seals assure peak performance. Built to last, this Tensioner Assembly has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
- RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, serpentine belts, drive belts, belt tensioners, and more.
- TRUST IN DAYCO: Dayco is a global leader in the automotive parts....
Check Stock
Dilwe Engine Sound Simulator, Throttle Linkage Group 2 Speakers Motor Engine Sound Simulator for 1/10 RC Model Car
- Suitable for:RC Car Engine Module With built-in memory chip, it will play the sound you used last time.Including ten kinds of sound, suitable for racing car, truck, etc..
- Easy to Install:RC Engine Sound Simulator can be installed in 1/10 remote control car, suitable for 94123.Practical and convenient in use.Such a practical tool you will need it..
- Feature:RC Engine Speaker Suitable for Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba. Theoretically, it supports most 2.4G independent receiver..
- Function:RC Engine Sound Simulated Module solves the problem of noise and is equipped with a button to adjust volume.Built to meet standard specification, strictly follow factory quality control..
- Directly Attached to:The RC Car Engine Sound Simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell..
Check StockDenon DN-X1500S 4-Channel DJ Mixer
- Includes revolutionary Denon DJ Engine standalone technology2 USB inputs for Engine playback in standalone modeIncludes 4-deck Serato DJ software2 high-definition displays show Engine and Serato DJ operationProfessional 4-channel digital mixer with 2 microphone inputs3 built-in instant effects for Engine playback and line inputsVelocity-sensitive performance pads for cues, rolls, slicer and samplesEthernet connection to control lighting and videoSerato DVS Upgrade readyMetal construction.
Check Stock49cc 2 stroke Gas Scooter Engine With Racing Air Filter for ScooterX EVO Pep Boys Zoom Bicycle Motorized DIY
- 49cc 2 stroke Gas Scooter Engine Complete With Racing Air Filter for ScooterX EVO Pep Boys Zoom Stand Up Scooter Bicycle Motorized.
- 49cc Air Cooled Complete Gas Scooter Engine with Red CNC Racing Intake Manifold High Flow Air Fileter.
- The engine with built-in square exhaust muffler, centrifugal clutch and gearbox. The engine comes with 3 pieces of output sprockets (14,17 and 20....
- This is the most commonly used engine for gas scooters, pocket bikes, and many other applications.The engine is compatible with all 43cc 49cc and 52cc....
- Kit Includes: 1 x 49cc engine with racing air filter, 1 x 14t sprocket, 1 x 17t sprocket, 1 x 20t sprocket.
Check Stock
Anbull 7.5 HP 223cc Recoil Start Gas Engine Horizontal Shaft 3/4' x 2.43' Go Kart Gas Engine for Log Splitter Single Cylinder 4-Stroke Gas Engine Forced by Cooling OHV Motor EPA Approved
- 【7.5HP High Performance Motor】Anbull 4 Stroke 7.5hp gas engine has a Max Output Power/Speed of: 5.5kW/4000RPM & Torque of 12.5Nm. Shaft Size: 3/4" Diameter, 3/16" Length. Keyway 5/16”-24 UNF. Compression Ratio of: 8.5:1. Bore x Stroke of: 70mm x 58mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm..
- 【Low Oil Sensor】The low oil shutoff functionality turns the engine off to prevent serious damage or failure when the gas engine at low oil level. Similarly, if the oil level is lower than required level when starting, it will not start..
- 【Built-in Forced Air Cooling System】Transistorized Pointless (TCI) Ignition System, recoil start system and built-in forced-air cooling system keep the motor cool and delivers high reliability and durability operation..
- 【Industrial Grade OHV Motor】Industrial grade OHV motor is equipped with higher combustion efficiency and allows your machine to run at higher speed..
- 【EPA approved】 The horizontal shaft is mounted in the crankcase with dual ball-bearings, making this gas engine an ideal replacement for most standard engine configurations. The powerful gas engine features a durable cast iron cylinder making it the perfect replacement engine for a go-kart, log-splitter and dozens of other....
Check Stock
Engine Sound Simulator, RC Car Engine Sound Simulated Module Set Simulator with Speaker for 1/10 Vehicle Cars Model Simulated Module Set (RC Model Part & Acces)
- Suitable for:RC Car Engine Module With built-in memory chip, it will play the sound you used last time.Including ten kinds of sound, suitable for racing car, truck, etc..
- Easy to Install:RC Engine Sound Simulator can be installed in 1/10 remote control car, suitable for 94123.Practical and convenient in use.Such a practical tool you will need it..
- Feature:RC Engine Speaker Suitable for Flysky gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba. Theoretically, it supports most 2.4G independent receiver..
- Function:RC Engine Sound Simulated Module solves the problem of noise and is equipped with a button to adjust volume.Built to meet standard specification, strictly follow factory quality control..
- Directly Attached to:The RC Car Engine Sound Simulator can be directly attached to the inside of the car body shell, and the mainframe can be attached to the frame or the inside of the shell..
Check StockOTC 1750A 6000 lb. 'Revolver' Diesel Engine Stand with Universal Engine Adapter Assembly
- OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures.
- 96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine.
- Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance.
- 2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded.
- Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications.
Check StockPowerbuilt Automotive Mechanic's Stethoscope Engine Diagnostic Tool, Engine Issue Detection Large 640582
- PURPOSE BUILT: Helps diagnose engine issues in valvetrains, bearings, transmissions, gears, and more.
- VERSATILE: Includes two probes, 80 mm and 205 mm, to pinpoint the source of problem noises throughout the engine.
- QUALITY TOOL: Mechanic's Stethoscope meets or exceeds ANSI standards.
- EASY TO READ: Includes detailed instruction with usage photos.
- Helps to pin point specific noises coming from your cars engine.
- For diagnostic engine work and troubleshooting.
Check StockBike Engine Carburetor for 80cc 66cc 60cc 50cc 49cc 2 Stroke Bicycle Motorized Engine
- Bike Engine Carburetor For 80cc 66cc 60cc 50cc 49cc 2 stroke engine motorized bicycle scooter.AKA 80CC Carburetor,80CC Engine Carburetor,80CC Carburetor 2 Stroke,80CC Racing Carbutetor,80CC Bicycle Engine Carburetor,80CC Bicycle Carburetor..
- 80CC 2 Stroke Carburetor built to strict quality control standards,made of aluminum , it is very durable.Comes with a throttle cable(48"),cheap and fine..
- Filter is part of the black plastic shroud.This 80CC Carburetor for 2-stroke gas bicycles is the perfect carb for any small gas engine project.It may be used on gas-powered bicycles, scooters,even skateboards..
- 80CC Engine Carburetor Size: 4.25"x2.36"x1.38"/10.8x6x3.5cm..
- Feel free to contact us by emails if you have any problems..
Check StockHot Wheels Car Engine
- Hot wheels toy car engine built for Tinkering.
- Op open the hood and check the oil, change a tire and even "rebuild" the motor.
- Great for role play and imaginative play.
- Exciting toy engine includes all car parts and three tools, plus working headlights, horn, and engine sounds, removable tires and much more.
Check Stock
