Categories

Best Bumper Bolt Installation

Hooke Road JK Rear Bumper with Spare Tire Rack + Steel Front Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road Front Bumper & Rear Bumper w/Tire Carrier Combo Fits for Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors(Exclude 2018 Wrangler JL)..
  • Heavy Duty Construction & Corrosion Resistance - The bumpers are manufactured from durable 5/32" steel sheet and 2"X0.120" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance..
  • Front Bumper - Built-in 10*4.5" winch plate for up to 12,000lb. winch.
  • Two D-rings and 4x 18W LED lights are included..
  • Rear Bumper w/Tire Carrier - Include 2" standard receiver hitches.
  • Two D-rings and 2x 18W LED lights are included.
  • Tire carrier open with door, accommodate up to a 37" tire..
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included)..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 1987-2006 for Jeep Wrangler TJ Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 1987-2006 for Jeep Wrangler TJ.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware..
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation. Without parking sensor holes..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2005-2015 for Toyota Tacoma Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 for Toyota Tacoma.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2013 for Chevrolet Silverado 1500 Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 for Chevrolet Silverado 1500.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add....
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced....
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with....
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2018 for Jeep Wrangler JK Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 for Jeep Wrangler JK.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

EAG Stubby Front Bumper with Stinger Hoop Guard and Winch Plate Fit for 07-18 Wrangler JK

  • FITMENT - Fit for 07-18 Wrangler JK, except 2017 JK Rubicon Recon model.
  • OFF-ROAD ACCESSORIES - Shackle mounts are bolted onto the bumper. Two 4.75 ton D-ring shackles and black isolators are included. Built-in 10x4.5" bolt....
  • FOG LIGHT HOUSING - Pre-machined fog light holes are compatible with OEM fog light. (Fog lights are not included.).
  • STINGER FRONT BUMPER - Stinger transforms your Wrangler's stubby bumper into an aggressive stinger bumper ready to take on the trail. This modular....
  • EASY INSTALLATION - Direct bolt-on replacement for the original stock bumper..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock

Vijay Front and Rear Bumper Textured Black with 9 Aluminum alloy LED Lights and Winch Plate for 2016-2022 Tacoma

  • [Compatible with ]: 2016-2017-2018-2019-2020-2021-2022 Tacoma.
  • [Material]: The precise tolerances range from 5/32 inch thick neutral steel plate and 2 inch x 0.120 inch steel pipe to provide excellent strength and....
  • [Package size and weight]: Front bumper size: 40.6"X25.2"X16.5". Weight: 145.8 lb /Rear bumper size: 69.7"X12.2"X13". Weight: 65.5 lb (Package size≠....
  • [Package]: Front bumper(with winch seat) + Rear bumper + LED lights + D-rings + Rubber ring + Screw + Installation manual.
  • [Easy installation]: No cutting or drilling is required,direct bolt-on.
Check Stock

KUAFU Rear Bumper Protector Compatible with 2005-2015 Toyota Tacoma One-Piece Heavy Duty Steel w/ 18W Led Lights

  • Rear Bumper Compatible with 2005-2015 Toyota Tacoma..
  • Precision designed to match your vehicle’s body lines. Heavy duty steel construction ensure the vehicle is protected against damage from road debris and impacts..
  • Rear bumper come prepped with advanced powder coating. Rust protection. Built to strict quality control standards..
  • Package Include: 1 x Rear bumper, 2 x 18W Led Lights, 2x D-Rings, all mounting hardware..
  • Kit includes installation instructions. Easy bolt-on. Quick installation with bolts, nuts and existing holes..
Check Stock