4 Pack High Density Garage Car Door Protector-Garage Wall Protector Bumper Guard for Car Doors Anti,Self Adhesive EVA Foam for Warehouse Parking Assist Collision (11.8x3.93x1.18 inches)
- ▶▶Feature:Available in 4 pieces, 30 cm (11.8") x 10 cm (3.93") x 3 (1.18"),Easy to cut and size. The car door protector strips can against fire and water, it is resistant to abrasion, oil and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork and other place..
- ▶▶Premium Quality : Made of high qualiity EVA Foam with strong adhesion tape backing, durable and easy to clean, more easy installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc. This garage wall anti scratch strips is perfectly use in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall..
- ▶▶ brand: Compare to other brand product, our protector strips is 3cm)(1.18 inch)thickness, service life of up to 3-5 years, can be better to provide full protection for your car, prevent damage caused by any moderate impacts..
- ▶▶Easy Installation : Just need to peel off the backing paper and stick it on the wall, 4 pcs guard strips are better for left and right side of the car, guard your car against bumps and scratches, it is suitable for DIY to multi shapes or size.....
Check StockRear Bumper Protector for Cars SUV Universal Bumper Guard Corner Protection Prevent from Scratch & Low Speed Impacts
- ✔ The car bumper protector protects the rear bumper from low-speed impacts from parking thereby preventing scratches. NOTE: DO NOT drive with it on....
- ✔ Rear bumper guard is made of high quality and high density durable foam material, strong bumper guard, can effectively protect the bumper from....
- ✔ This car SUV bumper guard size is 72" x 8.07" x 0.4" inches. PLEASE MAKE SURE THAT THE BUMPER PROTECTOR SIZE IS NOT TOO LARGE FOR YOUR CAR.
- ✔ The bumper is fully protected, the back bumper guard extra length goes around the corners to protect corners well, too. Your bumper is protected....
- ✔ Easy to install, installation with no damage, 2 velcro straps with elastic and 2 extension hooks to secure it in the place. The bumper guard will....
Check StockCar Trunk Protective Strip,Rear Bumper Protector Guard,Anti-Scratch and Anti-Step Strip/Automotive Exterior Accessories Suitable for SUV Sedan Commercial Vehicle Sport - Black
- ☛Unique Appearance: This car boot guard strip has anti-slip function and groove design, all black base, make your car upscale chic and....
- ☛High Quality: Our trunk rubber protection strip is made of upgraded PVC rubber material, durable and environmentally friendly, with....
- ☛Strong Adhesive: Our car anti-collision strips come with strong adhesive (a roll of magic nano glue), which can be used normally even in....
- ☛Easy to Install: Our rear bumper guard no drilling and welding and are easy to install - just peel off the adhesive and stick it in place.....
- ☛Multifunctional Use: This tailgate protector allows you to effectively protect the rear bumper from scratches when carrying luggage,....
Check StockYescom 31\ Reflective Corner Guard Wall Corner Protector with Yellow Strips for Garage Parking Lot 2pcs
- 31" Rubber L-Shape Corner Guard with reflective yellow safety strips, ideal for protecting car's door & bumper from accidental damage.
- Reflective yellow safety strips improve visibility and provide warnings of potential danger in dark situation or daytime.
- Durable & Corrosion resistance - rubber material is applied to either outdoor or indoor environments.
- Use tapping screws & plastic anchors for permanent installation on the wall.
- Fits Various Occasions - such as garage, parking lot, warehouse, office or any corners.
- Overall Dimension(LxWxH): 31 1/8" x 4 5/16" x 3 1/4" (79 x 11 x 8.2 cm).
Check StockYescom 31\ Reflective Corner Guard Wall Corner Protector Ruond with Yellow Strips for Garage Parking Lot 2pcs
- 31" Rubber Round Corner Guard with reflective yellow safety strips, ideal for protecting car's door & bumper from accidental damage.
- Reflective yellow safety strips improve visibility and provide warnings of potential danger in dark situation or daytime.
- Durable & Corrosion resistance - rubber material is applied to either outdoor or indoor environments.
- Use tapping screws & plastic anchors for permanent installation on the wall.
- Fits Various Occasions - such as garage, parking lot, warehouse, office or any corners.
- Overall Dimension(LxWxH): 31 1/8" x 4 9/16" x 3 1/8" (79 x 11.6 x 8 cm).
Check Stock
VANGUARD Stainless Steel Double Layer Rear Bumper Guard | Compatible with 11-15 Lexus RX350 / 10-15 Lexus RX450H / 14-19 Toyota Highlander
- PREMIUM QUALITY: Made with T304 Stainless Steel. Mirror-polished chrome finish. Each bumper guard is crafted from high grade steel and has a Chrome finish. The sleek design of Vanguard rear bumper guards create a sporty style profile for your car while being extremely durable and tough to give your rear bumper the protection from unwanted dings..
- EXCEPTIONAL FEATURES: Double layer construction provides the strongest rear end bumper protection for your vehicle. Includes all assembly and mounting hardware. Our rear bumper guards will not only enhance the appearance of your car but also add top notch rear bumper protection..
- PERFECT CHOICE: This double pipe rear bumper guard is designed to provide the ultimate in bumper protection. It is designed to keep your car safe day in and day out with style. This bumper guard is made from durable T-304 stainless steel and polished to a mirror finish..
- COMPATIBILITY: Perfect Fitment Guaranteed Vanguard VGRBG-1236-1238SS Rear Bumper Guard Double Layer Rear Bumper Guard | Compatible with 2011-2015 Lexus RX350 / 2010-2015 Lexus RX450H / 2014-2023 Toyota Highlander.
- ULTIMATE USAGE: Get great looks and improved protection from our rear bumper replacement bars. These bumper bars adds style and toughness to the car, mak....
Check StockVANGUARD Stainless Steel Double Layer Rear Bumper Guard | Compatible with 06-18 Toyota RAV4 Excludes TRD Models
- PREMIUM QUALITY: Made with T304 Stainless Steel. Mirror-polished chrome finish. Each bumper guard is crafted from high grade steel and has a Chrome....
- EXCEPTIONAL FEATURES: Double layer construction provides the strongest rear end bumper protection for your vehicle. Includes all assembly and mounting....
- PERFECT CHOICE: This double pipe rear bumper guard is designed to provide the ultimate in bumper protection. It is designed to keep your car safe day....
- COMPATIBILITY: Perfect Fitment Guaranteed Vanguard VGRBG-1018-1115SS Rear Bumper Guard Double Layer Rear Bumper Guard | Compatible with 2006-2018....
- ULTIMATE USAGE: Get great looks and improved protection from our rear bumper replacement bars. These bumper bars adds style and toughness to the car,....
Check Stock
License Plate Bumper Guard with Screws and Protector Rubbers, 2.3 Inches Thick Rubber License Plate Frame Protects Bumper Fits Universal Car, Truck, SUV, RV and Van
- Comprehensive protection for license plate: this rubber license plate frame protector is made of heavy-duty rubber material and with 2.3 inches thickness, can protect your car from bumper depression and scratches at rear-end collision or other accidents.
- More practical than steel: compared with steel bumper guard, the rubber guard is not easy to fray or rust, and won't cause hurt to your precious car, easier to assemble and safe to use.
- Bumper protector rubbers: this car bumper protector rubber uses quality double-sided glue that won't fall easily and it can be firmly adhered to your car.
- Universal fit for bumper guard for license plate: with stylish and universal design, this license plate bumper guard fits for any US "standard" license plate.
- Improve your front bumper protection with this jet-black license plate holder and bumper protector.
- It has great look and practical function.
- What you get: you will get 1 x license plate bumper guard, all hardware for installation, 2 x protector rubbers.
- If you have any other questions on this product, don't hesitate to contact us.
Check StockZeHuoGe 31\ Reflective Rubber Wall Corner Guard with Yellow Safety Strips Garage Wall Protector Foam Wall Edge Protector for Garage, Parking Lot,Warehouse
- 31" Rubber Round Corner Guard with reflective yellow safety strips, ideal for protecting car's door & bumper from accidental damage.
- Reflective yellow safety strips improve visibility and provide warnings of potential danger in dark situation or daytime. Thickness: 3/8" (9 mm).
- Durable & Corrosion resistance - rubber material is applied to either outdoor or indoor environments. Overall Dimension(LxWxH): 31 1/8" x 4 9/16" x 3 1/8" (79 x 11.6 x 8 cm).
- Use tapping screws & plastic anchors for permanent installation on the wall.
- Fits Various Occasions - such as garage, parking lot, warehouse, office or any corners.
Check Stock
4 PCS Non-Slip Bumper Feet Strips,OBKJJ Notebook DIY Bumper Feet Replacement Tool(Metal Crowbar×1,Tweezers×1) for Dell Inspiron |15 7569 7579|5368 5378|7460 7472 7560 7572 |7368 7378 |1
- Compatibility and precautions: fully compatible with the spirit of Dell Inspiron 5368 5378 7368 7460 7569 13-5 13-7, please check the product size and laptop model before purchasing, as long as peel off the backing films, it cannot be restored.
- Package Content:Bumper Feet Strips ×4,Metal crowbar×1，Tweezers×1.
- Easy to use: The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop or Ultrabook..
- Better help: These Bumper Feet Strips solve the DIY laptop UltraBook，Anti-slip bumper feet make your laptop work more decent.
- DIY laptop and use: G1 13 Chromebook, XPS 15 9560, Spectre, HP Envy X360, Omen, Pavilion, Surface Book, Please Clean the Groove or Surface Where the Strips Apply to Just peel off the backing films after the tape or surface is dry and apply the bumper feet strips on the where it shall go to..
Check Stock
Ultimate Protective License Plate Cover and Bumper Guard | Thick Heavy Duty Rubber Prevents Scratches and Dents in Low Impact Bumps | Universal Fit for Cars,Trucks SUVs and Vans Screws Included
- THE BEST CAR ACCESSORY YOU CAN GET - Provide maximum protection to your vehicle's bumper with this 2.3 inches AR-PRO Ultimate License Plate Bumper Guard. It's more than just a handsome new accessory for your car. It can protect your front bumper from scratches and dents during low-impact bumps. Upgrade your front bumper protection with this jet-black, thick, and durable license plate holder and bumper protector..
- THICK, HEAVY-DUTY RUBBER LICENSE PLATE MOUNT - At 2.3 inches thick, this rubber license plate frame can take a beating. Made from heavy-duty rubber, the frame has a high impact and tensile strength. It can withstand the impact and surface abrasions from backing up accidents and garage wall mishaps. As it is thicker and more well-built than most bumper guards, this design can withstand rougher bumper taps and provide a wider breadth from obstructions in front of the car..
- UNIVERSAL FIT ULTIMATE LICENSE PLATE BUMPER GUARD - With great looks that perfectly combine with its fantastic function, the AR-PRO Ultimate License Plate Bumper Guard keeps your car's front bumper in pristine condition whether you have an SUV, van, or truck. This front bumper protector fits standard US license plate size of 6 inches by 14 inches. And with an adjustable mounti....
Check Stock
Garage Wall Protector 4 Pack Car Door Corner Edge Waterproof Bumper Guard Protector High Density Self Adhesive Foam Pad for Parking Vehicle 11.8" x 3.9" x 0.8"
- ESSENTIAL GARAGE WALL PROTECTOR: The car door protector strips can against fire and water, it is resistant to abrasion, oil and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork and other place..
- HIGH QUALITY MATERIAL: Made of Eco-friendly high quality NBR Foam with strong adhesion tape backing, durable and easy to clean, more easy installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc..
- SURFACE FITS: This garage wall anti scratch strips is perfectly use in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall..
- GREAT ELASTICITY, EASY TO INSTALL:Just peel off the backing paper and stick it on the wall, the garage bumper protector has great elasticity and will match different wall corner perfectly. Please clean your garage wall surface and ensure it is smooth, non-dust, dry before installation..
- WHAT YOU GET: 4 Pack Car Door Protector. Each measures ....
Check Stock
Garage Wall Protector 4 Pack Car Door Corner Edge Waterproof Bumper Guard Protector High Density Self Adhesive EVA Foam Pad for Parking Vehicle 11.8" x 3.9" x 0.8"
- ESSENTIAL GARAGE WALL PROTECTOR: The car door protector strips can against fire and water, it is resistant to abrasion, oil and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork and other place..
- HIGH QUALITY MATERIAL: Made of high quality EVA Foam with strong adhesion tape backing, durable and easy to clean, more easy installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc..
- SURFACE FITS: This garage wall anti scratch strips is perfectly use in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall..
- GREAT ELASTICITY, EASY TO INSTALL:Just peel off the backing paper and stick it on the wall, the garage bumper protector has great elasticity and will match different wall corner perfectly. Please clean your garage wall surface and ensure it is smooth, non-dust, dry before installation..
- WHAT YOU GET: 4 Pack Car Door Protector. Each measures 11.8 x 3.94 x....
Check Stock
