Camco Black 4 4-in-1 Magnetic Cap-Fits Most RV 4" Square Bumpers, Features Small Holes to Increase Airflow and Block Insects (40310)
- Easily Remove Your RV Sewer Hose: Allows you to grab your sewer hose by the cap and pull securely from your RV’s bumper.
- Compatibility: Fits on the end of most metal 4-inch square bumpers.
- Lugs are compatible with any Camco bayonet-style sewer hose fitting.
- Magnetic: High-strength neodymium magnets keep the bumper cap in place.
- Features: Small vent holes provide airflow and double as an insect screen.
- Bonus: Includes an additional no-insect bumper cap.
Check Stock
Dr.Roc Replacement for Subaru Bumper Fender Clips with Fastenver Remover Kit for 90914-0007 90913-0067 90914-0051 91486-KJ010 90914-0063
- Replacement for Subaru Clips OEM NO.: 909140007 (90914-0007)—Fender Liner / Engine Cover / Wheel well Clips —23/64"(10mm)Hole, Head Dia:13/16"(21mm).
- Replacement for Subaru Fasteners OEM NO.:909130067 (90913-0067)—Bumper / Fender Liner / Mud flap / Engine cover / Grill Clips —5/16"(8mm) Hole, Head Dia:11/16"(18mm).
- Replacement for Subaru Rivets OEM NO.: 909140051(90914-0051)—Front Bumper / Quarter Trim Panel / Cowl Trim Panel / Splash Shield / Headlamp Assy Clips —1/4"Hole(7mm),Head Dia:13/16"(20mm).
- Replacement for Subaru Clips OEM NO.: 91486KJ010 (91486-KJ010)—Cowl Panel Vent Cap Clips —0.17"(4.4mm)Hole, Head Dia:0.72"(18.2mm).
- Stem Length:0.54"(13.7mm)--15PCS. Replacement for Subaru Clips OEM NO.: 909140063 (90914-0063)—Cowl Vent Air Inlet Duct Push-Type Retainer Clips —0.27"(6.8mm)Hole, Head Dia:0.78"(19.9mm).
- Premium OEM Upgraded Quality and Durable Subaru Clips Set —Made of Premium Auto Grade Nylon：PA66(Not Ordinary Cheap Nylon),solid like metal. Durable Fasteners & Fastener Remover with Conveniently Organized Box —15*4.4mm hole clips+15*6.8mm hole clips+15*8mm hole clips+20*10mm hole clips+15*7mm hole clips+1*....
Check StockDNA Motoring BUMP-F-F10-M5 M5 Style Gray Front Bumper Fog Light Housing with PDC Parking Sensor Holes Compatible with 10-16 BMW 5-Series Sedan/Hatchback
- HIGH QUALITY - This item comes with headlight washers and PDC parking sensor holes. Be made of high quality polypropylene and ABS plastic for strength and durability. It will replace your existing front bumper and gives a new aggressive look..
- SAFETY - Reduce or prevent physical damage to the front and rear of vehicles in low-speed crashes. It is designed to protect the hood, trunk, grill, fuel, exhaust and cooling system..
- DIRECT FIT - Designed to be an exact replacement for your factory OE bumper. The primer has been completed and can be painted according to the color of the vehicle. OEM style replacement part number: 51118048672, 51117285965, 51117285963, 51117285964..
- FITMENT - Compatible with 10-16 BMW 5-Series Sedan / Hatchback..
- PACKAGE - 1 x Front Bumper, 1 x Lower Vent Grills, 1 x Pairs of Fog Lights..
Check StockPEARL IZUMI Men s Tri Fly Cycling Shoe Black 45
- Reinforced Nylon sole is light and stiff.
- Direct-Vent technology on the sole for cooling and drainage.
- Quick-drying mesh upper for all-day comfort.
- Notched main strap for speedy entry and double heel loops for easy transitions.
- EVA foam and rubber heel bumper gives stability and walking comfort and 3-bolt cleat & SPD compatible.
Check Stockuxcell 40 x13 Inches Aluminum Alloy Universal Truck Car Grille Mesh Sheet Grid Rhombic Grill Mesh Hole 3x6mm Black
- [ material]The car grille mesh net is made of aluminium alloy, anti-corrosion, waterproof and long service life..
- [easy to cut&install]This car body grill mesh sheet is soft but durable, easy to cut and install. The mesh can be bent and into different shapes..
- [keep your car safe]The bumper mesh sheet can prevents debris and or harmful things from damaging radiators..
- [universal fit]Car grille mesh universal fit for any bumper, body kit, mudguard, hood vent, vehicle opening, etc. Allow air to pass by and keep the....
- [widely usage]Suitable for unlimited applications, grills, spoilers, air intakes, radiator grills, etc. It also can be use in your PC and your home....
Check StockLongacre® 52-52012 Liquid Filled 2.5 GID Tire Gauge 0-45 psi
- Gauge has a 2-1/2" diameter for easier viewing.
- Goes up in 1/2 lb. increments with 2% accuracy.
- Includes a 17" hose with swivel angle chuck installed with alternate ball chuck.
- Features a specially designed vent valve to equalize pressure and maintain gauge accuracy.
- The protective bumper helps protect it from bumps and drops that are inevitable in a shop environment.
Check StockFits for 2014-2017 Infiniti Q50 LH Style Glossy Carbon Fiber Rear Bumper Diffuser
- Fitment:Fits 2014-2017 Infiniti Q50 All Models.
- 1 X Rear Bumper Diffuser As Shown In the Picture.
- Made of Light Weight & Top-Grade Durable Real Carbon Fiber Material.
- Shark Fins Vortex Aerodynamic Design With Opening Vent..
- Instruction Not Included, Professional Installation Is Highly Recommended..
Check StockJC SPORTLINE Carbon Fiber Front Bumper Splitter Fits for A7-Sline S7 2019 2020 Fog Light Cover Trim Scoop Winglet Apron Fin Front Splitter
- Fitment:This front bumper vent is well fits for Audi A7-Sline S7 2019 2020..
- Material:JC SPORTLINE Carbon Fiber aerodynamics parts are using extremely strong, air craft high-grade carbon fiber material which are lighter in weight and high tensile strength ,this ensures long lasting service life you expect.Ultra high-gloss clear gel-coated finish & UV protected, this ensures long lasting service life you expect..
- Ultra Lightweight:Our carbon fiber parts are lightweight in comparison with other materials, giving you a weight reduction gain on your build..
- Installation: Install by self adhesive tape, no modification needed..
- This front fender scoop vent trim can make the vehicle look like a more performance car, it adds more down force and helps aerodynamic,dramatically improve styling & appearance..
Check Stock
Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)
- ... 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
- 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. This will reduce inlet temperature and improve overall performance over the entire operating range. The best part is that you can get a clean exhaust valve sound and know you have peak performance without having to recycle hot air and introduce unnecessary heat into the engine..
- [After-sales] Each of our products has strict quality inspection before leaving the factory. After you receive the product, if you have any questions, please feel free to contact our customer service, our factory has a lifetime warranty.
Check StockEvan-Fischer Front Fender Compatible with 2014-2019 Toyota Corolla Steel Passenger Side
- Applicable models: Fit for MercedesBENZ A-Class W177 4DR Sedan / 5D Hatchback AMG Sport Model 2019+..
- Elegant decoration: Elegant design, smooth surface, ergonomic design, comfortable feeling, make your car truly unique..
- Installation method: Before installation, confirm the position, tear off the double-sided decorative ring and stick it on..
- Material: Made of ABS plastic, beautiful and durable..
- Package Includes: 1 Pair of Side Air Vent Spoilers on the Front Bumper..
Check Stockmunirater 2-Pack Front Bumper Fog Light Cover Grilles Replacement for 2001-2006 BMW E46 M3 Left and Right Side
- This product replacement for 2001-2006 BMW E46 M3 air duct dual vent fog light covers (Not replacement for 3-Series models with M-Tech bumper).
- It is an easy modification to dress the front end up abit.
- Package Includes: 1 x right fog light cover and 1 x left fog light cover.
Check Stock
Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21
- ... 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
- 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. This will reduce inlet temperature and improve overall performance over the entire operating range. The best part is that you can get a clean exhaust valve sound and know you have peak performance without having to recycle hot air and introduce unnecessary heat into the engine..
- [After-sales] Each of our products has strict quality inspection before leaving the factory. After you receive the product, if you have any questions, please feel free to contact our customer service, our factory has a lifetime warranty.
Check StockPearl iZUMi Men s Tri Fly Select V6 Cycling Shoe Black/Shadow Grey 39 EU/6.1 D US
- 1:1 anatomic tri closure eliminates hot spots and removes pressure from your instep.
- Bonded Seamless Upper delivers all-day riding comfort and durability.
- SELECT insole provides excellent longitudinal and transverse arch support.
- SELECT 1:1 Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8).
- Plate features Direct-Vent technology for cooling and drainage.
- EVA foam and rubber heel bumper gives stability and walking comfort.
Check Stock
