Categories

Best Bumper Width Extension

CURT 45791 8-Inch Long Trailer Hitch Extension for 2-Inch Receiver 3,500 lbs black

  • ADDED CLEARANCE. This trailer hitch extension adds 8 inches of extra length to your hitch receiver, providing additional clearance between your bumper....
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated....
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch....
Check Stock

Rv Bumper Hitch Receiver 2 Inch, Bolt on Receiver Hitch, RV Bumper Hook Adapter Apply to 4 Inch to 4.5 Inch Beams for Bike Racks, Cargo Carriers Camper-On

  • This 2 inch RV Bumper Hitch Receiver can be fitted to the rear bumper of a 4" car and it has a 2" standard receiver for bumper extension. NOT for Towing..
  • 2'' RV Bumper Hitch Receiver is easy to install: You just need to fix the nut to the 4'' square rear bumper and tighten it with a screwdriver..
  • Excellent material: Bolt on receiver hitch made of high quality metal, it can withstand up to 200 pounds and carry 2 regular bikes, ready for your field trips..
  • The RV bumper hitch is extremely robust and durable, with a surface coating that remains smooth and free from embroidery. It is made from high quality metal, it is built to last..
  • If you have any questions, please feel free to contact us and we will respond within 24 hours..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

DocaPole 6-24 Foot Hard Bristle Brush Extension Pole |11” Scrub Brush with Telescopic Pole | Long Handle Cleaning Brush for House Siding, Deck, Garage, Patio and More

  • ...up to 24 feet of reach (and up to 30 while standing), the DocaPole 6 to 24’ Hard Bristle Cleaning Brush is perfect for cleaning house siding, decks, garage floors, gutter guards, brick, concrete – the brush’s stiff synthetic bristles are optimized for tough scrubbing on tough surfaces – the 24 foot DocaPole Extension Pole makes it possible to reach almost any dust, dirt, gunk, and grime that needs washing.
  • 24’ HIGH-REACH HARD BRISTLE BRUSH – Offering up to 24 feet of reach (and up to 30 while standing), the DocaPole 6 to 24’ Hard Bristle Cleaning Brush is perfect for cleaning house siding, decks, garage floors, gutter guards, brick, concrete – the brush’s stiff synthetic bristles are optimized for tough scrubbing on tough surfaces – the 24 foot DocaPole Extension Pole makes it possible to reach almost any dust, dirt, gunk, and grime that needs washing.
  • BI-LEVEL DESIGN WITH RUBBER BUMPER PROTECTION – Bi-level, multi-angle design enables the brush to maintain maximum surface area contact during regardless of the angle of attack – a rubber protective bumper encircles the brush head to ensure surfaces are not harmed during use, protecting exterio....
Check Stock

Xotic Tech Front Bumper Lip Spoiler + Side Skirt Splitter + Rear Bumper Lip Wrap Splitter Canard

  • 1 set of Front Bumper Lip Chin Spoiler Guard Body Kits (3pcs) + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs).
  • Stereoscopic design, fluid curve surface.
  • No block to the front ground clearance, effectively enhance the side extension.
  • This is a x Xotic Tech Trademark Brand product, exclusively available at Xotic Tech..
Check Stock

DocaPole Medium Bristle Deck Brush and Scrub Brush Extension Pole Attachment (10”) | Long Handle Scrub Brush and Deck Brush for Deck, House Siding, Brick, Concrete and More (Pole Not Included)

  • ...istle Brush is the ideal all-around wet-use / dry-use cleaning brush.
  • perfect for cleaning house siding, scrubbing the deck, sweeping off the patio, dusting off cobwebs, or cleaning dirt and mud off exterior brick walls and retaining walls – use by hand to clean and dust off easy-to-reach surfaces and use with an extension pole for your hard-to-reach cleaning surfaces.
  • THE “ULTIMATE” MULTI-PURPOSE MEDIUM BRISTLE BRUSH – The DocaPole Medium Bristle Brush is the ideal all-around wet-use / dry-use cleaning brush.
  • DRY-USE AND WET-USE – use the brush with soap and water to wash your house siding, scrub your deck, or clean patio furniture or keep the brush dry to use it as a broom or duster – sweep off the driveway, walkway or porch.
  • RUBBER BUMPER PROTECTION – a rubber protective bumper encircles the brush head to ensure surfaces are not harmed during use.
Check Stock

SAUCHOI 12 PCS 8 Inch Drawer Slides, Heavy Duty Full Extension Cabinet Rails, 3 Section Ball Bearing Sliding Rail Track for Drawer, Furniture, Cabinets, Closets, 100 lb Load Capacity, Black

  • STURDY & DURABLE - These drawer slides are made of high-quality cold rolled steel, which is anti-rust, anti-corrosion, anti-scratch and not easy to deformation. These heavy-duty drawer slides have high hardness and strong structure..
  • STABLE & SILENT - These full extension cabinet rails are equipped with ball bearings, which ensure that the drawers can be closed and opened freely without harsh noise. The end of the sliding rail track is cushioned by a bumper, which avoids the great noise when it is closed quickly. At the same time, adverse collisions are avoided..
  • MEET YOUR NEEDS - You will get 6 pairs of cabinet drawer slides. Just the right amount to meet your installation and replacement requirements, and it will not be idle for a long time. This is a 8-inch long drawer slider with a width of 1.7 inches and a thickness of 1/2 inch..
  • STRONG LOAD CAPACITY - These 8-inch cabinet rails have strong load capacity. The maximum load capacity is 100 lbs/45 kg. It can easily carry usual household drawers and cabinets. You can install it on drawers, cabinets, closets, sideboards and other furniture..
  • MONEY-BACK GUARANTEE - After receiving the 3-section full extension ball bearing drawer slides, please check the packaging. Feel free to contact us for any questions....
Check Stock

AA-Racks Model X3901 Short Bed Truck Ladder Rack Side Bar with Long Over-cab Ext. -Matte Black

  • Our unique design of Bracket Bar are built to strengthen the existing basic truck rack style. Each two of the Bracket Bar are jointed with 6 / 4 Grade 8 Carriage Bolts.
  • adding a total of TEN Carriage Bolts built on each upright poles..
  • The package also comes with Two of the One-Piece Handrail, which provides the “Grab and Hop” convenience of getting on the truck bed..
  • It features the extendable top cross-bar which can be adjusted for different sizes bed width. The adjustable range covers inner bed width from Min. 51'' Max. 71''. The height is 30.5'' to the clearance and 26'' to the cross bar.Fits 5.0'~8.0' bed.
  • Both the Over-cab Extension Bar & Side Bars are Adjustable in length.
  • offering a wide range of fitment (Width & Length) for different Trucks Models.Side Bar Extension Length Adjustable:53.5''~90''.
  • Over Cab. Extension Width Adjustable: 45''~56.3''.
  • The special design of the support bars allows it to be fitted with most types of toolboxes..
Check Stock

Ives by Schlage 436B-716 Dome Door Stop

  • Packed with wood screw and plastic anchor.
  • Replaceable gray, non-marring rubber bumper.
  • Overall Height: 1 in. Base Height: 3/16 in. Bumper Height: 11/16 in. * The base height terminates where the bumper & clearance for the door begins..
  • Base Width: 1-3/4 in. (approx.) , Base Depth: 2 in. or Base Diameter: 1-3/4 in. x 2 in. Oval.
Check Stock

AA-Racks Model X39 Full-size Truck Ladder Rack Side Bar with Short Cab Ext.-Matte Black

  • Our unique design of Bracket Bar are built to strengthen the existing basic truck rack style. Each two of the Bracket Bar are jointed with 6 / 4 Grade 8 Carriage Bolts.
  • adding a total of TEN Carriage Bolts built on each upright poles..
  • The package also comes with Two of the One-Piece Handrail, which provides the “Grab and Hop” convenience of getting on the truck bed..
  • It features the extendable top cross-bar which can be adjusted for different sizes bed width. The adjustable range covers inner bed width from Min. 51” Max.71”. The height is 30.5” to the clearance and 28” to the cross bar.Fits 5.0’~8.0′ bed.
  • Both the Over-cab Extension Bar & Side Bars are Adjustable in length.
  • offering a wide range of fitment (Width & Length) for different Trucks Models.Side Bar Extension Length Adjustable:53.5”~90”.
  • Over Cab. Extension Width Adjustable: 45”~56.3”.
  • This unit is Powder-coated with weather resistant paint. Color Options of Matte Black & Matte White are also available for choices..
Check Stock

Hooke Road Cherokee XJ Metal Front Bumper and Rear Bumper Combo Compatible with Jeep Cherokee XJ 1984-2001

  • FITMENT: Full Width Front and Rear Bumper Kit Compatible with Jeep Cherokee XJ 1984-2001 Models. Moderate installation needs minor cutting to install front bumper...
  • DESIGN: The front bumper Integrated grille guard hoop provides superior protection..
  • EXTEA LIGHTING: 2×18W LED spotlights and 2×18W LED floodlights included..
  • CORROSION RESISTANCE: The bumpers were made of heavy duty 9-gauge(5/32 inch) steel. Textured black powder coat finished. Premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper has built-in winch plate for up to 12000 lbs use. Rear bumper has 2" standard hitch receiver. Include 4 D-rings and D-Ring isolators..
Check Stock

AA-Racks Model X39 Truck Bed Ladder Rack Side Bar with Long Cab Ext (X39-LC-Black)

  • Our unique design of Bracket Bar are built to strengthen the existing basic truck rack style. Each two of the Bracket Bar are jointed with 6 / 4 Grade 8 Carriage Bolts.
  • adding a total of TEN Carriage Bolts built on each upright poles..
  • The package also comes with Two of the One-Piece Handrail, which provides the “Grab and Hop” convenience of getting on the truck bed. The middle of two side bars increase two welded steel plates to enhance brace to even load distribution..
  • It features the extendable top cross-bar which can be adjusted for different sizes bed width. The adjustable range covers inner bed width from Min. 51'' Max.71''. The height is 30.5'' to the clearance and 28'' to the cross bar.Fits 5.0'~8.0' bed.
  • Both the Over-cab Extension Bar & Side Bars are Adjustable in length.
  • offering a wide range of fitment (Width & Length) for different Trucks Models.Side Bar Extension Length Adjustable:55.2''~98.6''.
  • Over Cab. Extension Width Adjustable: 45''~56.3''.
  • This unit is Powder-coated with weather resistant paint. Color Options of Matte Black & Matte White are also available for choices..
Check Stock