DaierTek 12V Bus Bar 6 x 5/16 M8 Terminal Studs 12 Volt Power Distribution Block with Cover Battery Bus Bar 12V - 48V Positive & Negative for Automotive Car Boat Solar System

  • 【Product Name】- Battery bus bar terminal block, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one)..
  • 【Terminals & Rating】- Each 12v power distribution block includes - 6 x M8 (5/16") terminal studs. This battery distribution block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC..
  • 【Round Corner Base】 - The 12v bus bar is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with other busbars..
  • 【More Open Area Design Cover】 - The cover of this 12v power block will allow 180° wire lug installation and can meet variety kinds of installat methods of end terminals..
  • 【Application】 - This marine power distribution block uses copper plates and stainless steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for automotive, car, marine, boat, etc..
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

Heart Horse Bus Bar Terminal Block 1/4 Power Stud Battery Junction Block Post Distribution Block Insulated with Cover DC 48V 150A for Auto Truck RV Boat 1/4 ,Red+Black

  • WORKING RATING - Power stud size: 1/4".Maximum working voltage is DC 48V & up to 150 Amps.The battery bus bar is measured 1.77" x 1.69" x 1.4"..
  • EASY TO USE - Each bus bar with a cover can prevent short circuits and is completely safe.The cable can be installed with a wrench without removing the cover..
  • DURABLE & DEPENDABLE - The bus bar has good electrical conductivity and corrosion protection for durability.Terminal block's material is stainless steel, insulated base..
  • EFFICIENTLY DISTRIBUTE POWER - With these power distribution block, you can organize your wiring cleanly and keep your environment clean and tidy..
  • APPLICABILITY - Battery junction block is widely used in motorcycles, cars, trucks, RVs, etc..
Check Stock

Mofeez Power Distribution Block Bus Bar 4 x 3/8 Posts 6 x #8 Screws Terminals Max 48V 250A Pair Red & Black

  • Basic Parameters --- 6*#8 stainless steel terminal screws, 4*3/8" studs. The dimensions: 6.7"Lx1.3"Wx2.1H"..
  • Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered..
  • Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant..
  • Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage..
  • Wide Applications --- Mofeez bus bar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. The busbar holds wide cables securely to keep the wires neat..
Check Stock

MOFEEZ Power Distribution Block Bus Bar 4 x 5/16 Posts 6 x #8 Screws Terminals Max 48V 250A Pair Red & Black

  • Basic Parameters --- 6*#8 stainless steel terminal screws, 4*5/16" studs. The dimensions: 6.7"Lx1.3"Wx2.1H"..
  • Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered..
  • Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant..
  • Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage..
  • Wide Applications --- Mofeez bus bar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. The busbar holds wide cables securely to keep the wires neat..
Check Stock

Bopaodao Copper Bus Bar 3mm x 25mm x 5.91 inch / 150mm, 1Pcs C110 Pure Cu Copper Flat Buss Bar Stock

  • 1Pcs c110 copper flat bus bar, 3mm x 25mm x 5.91 inch / 150mm, about T 1/8" x W 1".
  • Copper flat bars are widely used for electrical applications for the high electrical and thermal conductivity. Due to its exceptional strength, ductility and corrosion resistance, copper flat bar is also typically used in architectural applications. Uses of copper flat bar include automotive, construction, machined components, roofing, industrial, electrical, fabrication, engineering, manufacturing, marine equipment, architecture industries.
  • As a factory seller, we would like to accept any customization about the copper bar, including the length, drilling and bending or any other special needs, please contact us.
  • The copper bar is made of 0.999 copper, which is the C110 Cu, we also provide tinned copper bar and Nickel-plated copper bar.
  • Copper bars are also called copper bus bars or copper buss bars. They are made of copper and have rectangular or chamfered (rounded) rectangular cross-sections. (Nowadays, rounded copper bars are generally used to avoid tip discharge). The circuit plays the role of conveying current and connecting electrical equipment. Sometimes it can also be made as crafts or decorations.
Check Stock

NESGLODUO Copper Flat Bar - Copper Bar Stock, Copper 110 Flat Bar, 0.24in x 1in x 12in

  • 【Size】It is a solid bar of copper: 12''L x 1''W, 0.24'' thickness and weight is 14.11 ounces, no more no less, good size for the electrical project you're looking for..
  • 【Material】Copper flat bar is made of copper, grade as C-110. It's thick enough and conducts heat well, so burn through is mitigated, if you need something to soak up heat this works well..
  • 【Features】Easy to cut and drill, and work great for your intended use. My uncle easily fabd a bus bar system for his new X-S-3400s, good investment compared to custom machined pieces that are 3-4x the cost..
  • 【Copper 110 Flat Bar】It would carry current with no issues and work well for your project such as make a bud bar for electrical project, or bus bar for battery connections..
  • 【Application】Copper flat stock is suitable for various milling, craft, lathe, knife project, battery terminal L brackets, home solar battery bank, or others electrical engineering..
Check Stock

Voswitch Overhead 8-Switch Pod/Panel with Control and Source Box Green Backlight Compatible with Jeep Wrangler JK JKU 2007-2018

  • Compatible with Jeep Wrangler 2007-2018 JK & JKU . Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at....
  • Diodes to protect sensitive accessories such as LED lights from "field collapse".
  • One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame..
Check Stock

Victron Energy Lynx Power in Battery Connector

  • The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
  • The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
  • It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
  • A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

8 Terminal Bus Bar Terminal Block 10 Pack Brass Wire Screw Terminal for Car Boat Marine Ground Power Distribution Terminal Block

  • Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
  • High quality plastics base ensures great mechanical strength and durability.
  • Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.
Check Stock

Voswitch Overhead 8-Switch Pod/Panel with Control and Source Box Blue Backlight Compatible with Jeep Wrangler JK JKU 2007-2018

  • Compatible with Jeep Wrangler 2007-2018 JK & JKU . integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.0VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!.
  • Diodes to protect sensitive accessories such as LED lights from "field collapse".
  • One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame..
Check Stock

Recoil S2P-516 Busbar Dual 5/16” Studs and #8 Screw Terminal Power Distribution Block with Ring Terminals Pair Red & Black

  • Product features: brass plate and stainless steel terminals as conductors have low resistance, conductivity and corrosion resistance..
  • Parameters: maximum voltage: 300 V AC, 48 V DC, maximum continuous current: 130 A AC, 150 A DC..
  • Scope of application: suitable for automobiles, trucks, ships, boats, yachts, etc..
  • Material: The base is made of hard plastic, durable, and the protective cover is made of PC to prevent accidental electrical short circuit..
  • Package: A red battery bus bar and a black battery bus bar..
Check Stock

Square D - PK4GTACP 4 Terminal Ground Bar Kit, Silver

  • High Quality Material -- The 4 position terminal bus bar is made of brass, polycarbonate shell, durable, with high strength, high hardness, wear resistance..
  • Easy to Use -- Without protective cover, the 4 terminal bus bar can be used directly, easy to wire, convenient and fast..
  • Product Dimension -- Total Size: 71 x 15 x 21mm / 2.79" x 0.6" x 0.83".
  • Widely Usage -- The terminal block widely used in distribution boxes, distribution cabinets, other high pressure equipment and electrical equipment factories. Also can be used for trucks, cars, yachts, ship wiring, etc..
  • Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..
Check Stock