Categories

Best Busbar Connection

Sonew PIN Type Copper Busbar, Conductivity Line 63А 2P 12 Way for Circuit Breaker Distribution Box 230‑415V

  • The electric copper busbar is suitable for connecting to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches. Circuit breakers used in working condition enterprises, construction sites, schools, hotels, homes and other places..
  • The PIN TYPE line is made of red copper. The busbar has the characteristics of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • The PIN TYPE copper busbar adopts PVC dust-proof casing to protect the internal aging, and has the characteristics of insulation and not easy to break..
  • The copper current and voltage lines are exquisite and meticulous in workmanship, and will not cause serious wear and tear due to excessive installation, and cannot be re-installed..
  • The 2P 12-way copper busbar has a rated current of 63А and a rated voltage of 230-415V, which can be cut according to the needs of use.
Check Stock

(Red) 12 Terminal Distribution Block -BUSBAR- with Ring Terminals

  • 1/4″ Stud – 12 Terminal Red Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock

JQuad(Pair - Red & Black) 12 Terminal Distribution Block -BUSBARS- with Ring Terminals

  • 1/4" Stud - 12 Terminal Red & Black Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock

GLOSO E5 Stud Type Breaker Copper Busbar with Slots (12 Gangs)

  • E5 Stud Type Circuit Breakers' Mounting Copper Busbar - 12 Gangs, 1 Pack.
  • 1 Piece of 12 Gangs Copper busbar with slots, made from heavy solid copper.
  • Make Easy to Connect Stud Type breakers in order to feed a number of protected circuit.
  • Busbars are 0.56" wide and 10.49" long, 0.05" thickness.
Check Stock

BougeRV 120W Lighter Portable Solar Panel Monocrystalline Foldable Waterproof Solar Panel Suitcase with Built-in Kickstand for Generator Power Station RV Camping Off-Grid with Protective case

  • 【 9BB & 23.5% High Efficient】Mono solar panel of 9 busbar solar cells, shows stronger current collection ability which can provide high....
  • 【Lighter & Portable】The volume and weight of foldable solar panels with suitcase design are smaller than the 5 busbar of the same spec, after....
  • 【Durable & Waterproof】BougeRV foldable Solar panels with 9 busbar solar cells have much lower hot spot temperature which can bring lower annual....
  • 【Simply & Stability】The solar panel is equipped with adjustable brackets, which can be easily placed on uneven ground such as grass and beach.This....
  • Compatibility & Package】BougeRV 120 watts solar panel is compatible with most solar power station systems and solar off-grid system（RV, Home,....
Check Stock

4\ Ground/Power Distribution Terminal Block Battery Bus Bar Set [Max. 300V AC/48V DC] Negative/Positive Insulated Busbar for Auto Marine Car Trailer RV Boat - Black + Red

  • START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware..
  • TRULY UNIVERSAL - Whether your working on a boat, a car or an RV, we've got you covered. Built to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W), these power distribution blocks are ideally suited for all of your power needs..
  • YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts..
  • WORKS WITH YOU, NOT AGAINST YOU -  Extra tall cover cutouts give you maximum flexibility with minimal effort. Use whatever gauge wire you need, route your wires from either side, double-stack wires if necessary, the covers will still fit..
  • SIMPLE - Sometimes "more options" just means more difficult. Our 6 terminal, 4-3/4? busbar gives you everything you need without overcrowding your system, or your patience..
Check Stock

(Red) 3/8' 4 Stud Power Distribution Block -BUSBAR- with Cover - Made in The USA

  • MADE IN THE USA – This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long.
  • Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength.
  • Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments – Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING.
  • 4 Stainless Steel 3/8″ Studs Making This Busbar Suitable For a Variety Of Applications.
  • Max Amperage: 250 amps @ 12 vdc, Max Volts: 48 vdc.
Check Stock

4 Ground/Power Distribution Terminal Block Battery Bus Bar Set [Max 300V AC/48V DC] Negative/Positive Insulated Busbar for Auto Marine Car Trailer RV Boat - Black/Red

  • START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware..
  • TRULY UNIVERSAL -  In order to work wherever you might need it, we designed each busbar to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W). So whether your working on a boat, a car, or an RV, we've got you covered..
  • YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts..
  • WORKS WITH YOU, NOT AGAINST YOU -  Extra tall cover cutouts give you maximum flexibility with minimal effort. Use whatever gauge wire you need, route your wires from either side, double-stack wires if necessary, the covers will still fit..
  • SIMPLE - Sometimes "more options" just means more difficult. Our power and ground 12 terminals, 4-1/2? distribution block gives you everything you need without overcrowding your system, or your patience..
Check Stock

Mofeez Bus Bar -3x1/4”Post,10x#8 Screw Terminal Power Distribution Block with Ring Terminals(Pair - Red & Black)

  • PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs..
  • WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore..
  • RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute)..
  • HIGH QUALITY FOR SAFE----- Nickle plated brass contact plate for low resistance ,maximum conductivity and protect against corrosion..
  • USE IN MULTIPLE OCCASIONS----- Mofeez busbar gives a neat and clean finish to any installation in your boat, car or caravan.Manufactured from robust ABS plastic for excellent strength and durability in even the harshest of environments..
Check Stock

GOUNENGNAIL-.157\ x 2.36\ x 7.87\ Copper Ground Bar Kit, with 5/16''x10 Terminal Positions,Copper Grounding Busbar Bar Kit

  • Copper ground bar . Made of high conductivity copper to inhibit corrosion.Insulator material: Made from UL recognized resin material and meets the Requirements of UL 94 VO for Self-Extinguishing Materials..
  • Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily..
  • Comes pre-assembled with brackets and insulators attached for quick installation.
  • This is a copper ground bar set, including one copper plate, two polyester standoff Insulators, two stainless steel brackets, 5/16'',10 stainless steel terminal positions. ..
  • Widely used in high low power distribution cabinet.For power distribution, transmission, fixing copperor copper busbar, etc, play the role of minsulation and connection..
Check Stock

(Red & Black) 3/8' 4 Stud Power Distribution Block -BUSBAR- with Cover - Made in The USA

  • MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long.
  • Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength.
  • Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING.
  • 4 Stainless Steel 3/8" Studs Per Block Making This Busbar Suitable For a Variety Of Applications.
  • Max Amperage: 250 amps @ 12 vdc, Max Volts: 48 vdc.
Check Stock

Recoil BBSPG4 Insulated 4 Position Bus Bar 4 x M5 Studs Terminals Power Distribution Block Busbar with Ring Terminals

  • PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs..
  • WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore..
  • RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute)..
  • HIGH QUALITY FOR SAFE----- Nickle plated brass contact plate for low resistance ,maximum conductivity and protect against corrosion..
  • USE IN MULTIPLE OCCASIONS----- Mofeez busbar gives a neat and clean finish to any installation in your boat, car or caravan.Manufactured from robust ABS plastic for excellent strength and durability in even the harshest of environments..
Check Stock

BougeRV 1100WH Power Station with 120W Lighter Portable Solar Panel, Monocrystalline Solar Panel for Charging Solar Generator with 200W Input, Battery Backup for Camping, Emergency

  • ...lectric grill, electric blanket, smartphone, laptop, etc..
  • 【STRONG BUT QUIET】: Aluminum housing can withstand harsh environments, protecting Power Station from damage by drops and bumps. Good heat dissipation of Aluminium shell leaves you little noise.
  • 【 9BB & 23.5% High Efficient】: Mono solar panel of 9 busbar solar cells, shows stronger current collection ability which can provide high conversion efficiency up to 23.5%. The narrower busbar space and more cells receiving surface brings lower kilowatt-hour cost and increase the output of the PV module. the smaller chamfer design increases the area of each cell, which greatly improves the charging effect..
  • 【Lighter & Portable】:The volume and weight of foldable solar panels with suitcase design are smaller than the 5 busbar of the same spec, after folding is only 25.59*20.07*1.96 inches, easy to store and carry. Made of Ultralight material（PET）, only weighs 10.36 lb. The corner protection design of the frame and the spring loaded butterfly twist latch buckle can protect the solar panel when you use or store the panel..
  • 【Durable & Waterproof】: BougeRV foldable Solar panels with 9 busbar solar cells have much lower hot spot temperature which can bring lower annual power attenuation a....
Check Stock