OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

  • 1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
  • Bushing dimensions: 11/16" diameter x 2-1/8" long.
  • Bolt dimensions: 1/2" diameter x 3" long.
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

BEARING BUSHING KIT | For Steering Column Intermediate Shaft Lower | 905-512 | w/Bushing Lube 2 YEAR WARRANTY REPLACEMENT !

  • 【 BUSHING / BEARING】Mounts in the lower steering column . . . . . . . ..
  • 【DIRECT REPLACEMENT】 . . . . .OE Quality. .Built to strict quality control standards.
  • 【KIT】Bushing Kit W/ shaft lube Plastic construction for long-lasting durability..
  • 【OE PART NUMBERS】 OE part number: 88963617 - 905-512.
  • 【VERIFY FITMENT : CLICK SEE BELOW **** PRODUCT DETAILS******.
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

Prime-Line GD 12234 Garage Door Torsion Spring, .250 inch x 2 inch x 32 inch, Green, Right Hand Wind

  • Torsion Springs Single Left 243 x 2" with Winding Rods Center Steel Bearing.
  • Includes spring left, steel bearing and winding bars.
  • Springs are made in the USA using Oil Tempered.
  • You will receive only ONE (1) bushing or bearing with a pair of springs.
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals CNC Non-Slip Lightweight Aluminum Alloy Bicycle Pedals Sealed Bearings Bicycle Platform Pedals 9/16\ BMX Road Bike Pedal

  • DURABLE MATERIAL:These mountain bile pedals are made of CNC machined high strength aluminum alloy, You may enjoy the aggressive trail riding and some jumping with these mtb pedals. With carbon fiber bushing around spindle,makes the pedal more lightweight, durable and anti-corrosion, And the bushing keeps these flat pedal spin smooth without noise.
  • GREAT ANTI-SKID:The bike pedals featured 5 stainless steel spike screw, there is thread on the pins, which provide the powerful grip to your foot, makes your cycling safe. Meanwhile, the carving from the pedal’s surface increase the anti-slip ability. You will enjoy the efficient riding.
  • LUBRICATED BEARING:The road bicycle pedals are built in one sealed bearing and one DU bearing, Which keep these pedals are lubricated and stable, the bicycle platform will work smooth and durable, excellent for long distance riding. Additionally, the ending cap will keep bearing clean, and stay away from water and dust infiltrating.
  • WIDE BIKE PLATFORM:The bicycle pedals featured 98mm length and 90mm wide platform. Your foot will get the great support from the the wide platform, ease the pressure from the platform but keep your riding effectively . Only 151 g for each pedal,ultra lightweight.Withe the advanced big logo patter....
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals CNC Non-Slip Lightweight Aluminum Alloy Bicycle Pedals Sealed Bearings Bicycle Platform Pedals 9/16\ BMX Road Bike Pedal

  • DURABLE MATERIAL:These mountain bile pedals are made of CNC machined high strength aluminum alloy, You may enjoy the aggressive trail riding and some jumping with these mtb pedals. With carbon fiber bushing around spindle,makes the pedal more lightweight, durable and anti-corrosion, And the bushing keeps these flat pedal spin smooth without noise.
  • GREAT ANTI-SKID:The bike pedals featured 5 stainless steel spike screw, there is thread on the pins, which provide the powerful grip to your foot, makes your cycling safe. Meanwhile, the carving from the pedal’s surface increase the anti-slip ability. You will enjoy the efficient riding.
  • LUBRICATED BEARING:The road bicycle pedals are built in one sealed bearing and one DU bearing, Which keep these pedals are lubricated and stable, the bicycle platform will work smooth and durable, excellent for long distance riding. Additionally, the ending cap will keep bearing clean, and stay away from water and dust infiltrating.
  • WIDE BIKE PLATFORM:The bicycle pedals featured 98mm length and 90mm wide platform. Your foot will get the great support from the the wide platform, ease the pressure from the platform but keep your riding effectively . Only 151 g for each pedal,ultra lightweight.Withe the advanced big logo patter....
Check Stock

MaxAuto 11x4.00-5' Flat Free Zero Turn Mowers Tire on Wheel, 3/4' or 1/2' Bushings, 3.4' Centered Hub - Hub Length 3.4'-5', Universal Fit Smooth Tread Tire for Zero Turn Lawn Mowers, Set of 2

  • 【Parameter】Tire Size: 11×4.00-5″, Tire Diameter:11″, Tire Width: 4″, Hub Length: 3.4″-4″-4.5″-5″ Centered Hub, Bushing size: 3/4″ or 1/2″, Rim Diameter: 6″, Load Capacity: 350 lbs(158 KG), NOT for highway use and static load-bearing. Please check your existing Tire Size, Hub Length, Hub Type and Bushing Diameter to ensure correct replacement..
  • 【Extra Adapter Kit】11×4.00-5″ Flat Free Tire is pre-assembled with 3.4″ centered hub and 3/4″ bushing. Comes with an additional adapter kit, 4pcs of 1/2″ Bushing, 4pcs of 1/4 ” spacer, 4pcs of 1/2″ spacer, 4pcs of washer, 4pcs of shim, which can greatly expand its compatibility. Allowing to adjust Hub Length and Bushing Size based on their needs..
  • 【Repalcement for】11×4.00-5″ Flat Free Tire on Wheel is suitable for most zero-turn lawn mowers and garden tractors. Widely Applicable for Model F935 / RTZ42 / ZTX42. Be noted that 11×4.00-5″ Flat Free Tire is not fit for Model RZT L/ Z335 E / Compact Pro 34..
  • 【Feature】11×4.00-5″ Flat Free Tire is made of solid polyurethane foam, maintenance-free and puncture-proof, saving time, no need to worry about air pressure and inflation..
  • 【Package Include】Set of 2 11×4.00-5″ Flat Free Smooth Tread Tire on Wheel. Repl....
Check Stock

DeShan 52PCS Custom Bushing Bearing & Seal Driver Set Transmission Wheel Axle Bearing Race Installer Seal Remover Press Tool Kit

  • [ Custom assembly ]: This custom bushing, bearing and sealed drive kit allows you to build your own custom bushing drive. Choose the required size and assemble your drive tool..
  • [ High quality ]: All these custom bushings, bearings and sealed driver kits are made of high-standard aluminum with excellent service life and durability..
  • [ Easy to use ]: simple to use, you only need to select the required size, then assemble your custom driver, select the component or size, assemble the drive tool, and beat the tool to complete the work. All discs are fully interchangeable with sealed drive kits..
  • [ Great Compatibility ]: This set Can remove or install bushings that are flush with the housing, ideal for removing seal, bush or bearing job. All 50 pieces are interchangeable with each other so you get many different size variations in one set so you will do the job quickly..
  • [ After-sales Service ]:If the product has any quality problems, We provide free return&exchange service. you could contact our customer service, we will give you an exact answer within 24h..
Check Stock