Categories

Best Butt Weld Ball Valve

Northern Brewer - MegaPot Stainless Steel Brew Kettle with Volume Markings 8 Gallon w/Valve

  • Crafted of stainless steel for ease of cleaning.
  • Weld-less Ball Valve for easy liquid transfer. Now features our IsoFlow Single Piece Bulkhead fittings!.
  • Handles are riveted in place to aid in lifting a hot liquid-filled pot.
  • Stay cool silicone handles on the kettle and lid serve to limit scorching.
  • Graduated gallon-markers inside the kettle.
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16

  • For Accurate Calibration of Butt Fillet Type Welds.
  • Determine the Leg Size of the Fillet Weld.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Outdoor sports fashion professional accessories

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Magpul MOE Fixed Rifle Stock, Gray

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Flat Dark Earth

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Olive Drab Green

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Eastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
  • Full Material Thickness After The Repair.
Check Stock

Ar-15 Defensive Rifle Operation Maintenance Shooting Instruction Defensive DVD

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Black

  • Mounts to rifle-length receiver extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
  • Provides a high-quality, economical alternative to standard firearm parts.
  • Distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
Check Stock

Eastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock