Categories

Best Butt Weld Pipe

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Exhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip

  • 1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
  • Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
  • 2.00 Inch Diameter Pipe 8.00 Inches Long.
  • Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16

  • For Accurate Calibration of Butt Fillet Type Welds.
  • Determine the Leg Size of the Fillet Weld.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Outdoor sports fashion professional accessories

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Magpul MOE Fixed Rifle Stock, Gray

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

KCHEX Boat Trailer Incandescent Pipe Light Kit for 2\ PVC Upright Guide Poles Sealed

  • ➨ These incandescent Pipe Lights are designed for long-life and convenience. Two Incandescent Oval Lights are sealed inside a PVC housing. housing mounts directly onto 2 inch pvc pipe with a 2 3/8 Outside Diameter. and also can be adapted for other sized pipes..
  • ➨ The Lights perform Turn signal, Braking function, and Running lights. The Pipe Light Housing also features reflectors on the rear of the housing to assist in reversing. Whats included: Pair of Pipe-Light PVC housing, Pair of Incandescent 6 inch Oval Lights, Pair of 10 Foot wiring pigtails, Four butt connectors, Four scotch locks, and Four Stainless Steel Screws..
  • ➨ Kit includes: One Pair of PVC Housings. One Pair of Red Incandescent Pipe lights. One Pair 10 foot Pig Tail Wiring Harness. Four butt Connectors. Four Stainless Steel Screws. Four scotch locks. ( for holding wiring to trailer frame ).
  • ➨ COME WITH AN EASY INSTALL GUIDE FOR BOATERS.
Check Stock

Magpul MOE Rifle Stock, Flat Dark Earth

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

Magpul MOE Rifle Stock, Olive Drab Green

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock