Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- Butt Welding Clamps includes 16 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
- Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
- Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 16 clamps for larger projects, then joint weld between them.
Check StockForney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check StockLTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch
- LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
- Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
- The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
- No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
- LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock
Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
- 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
- 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
- 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials..
- 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to make sure a firm fixation.
- Use all 16 clamps for larger projects, then perform joint welding between them..
- 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
- meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check StockForney 31610 E6010 Welding Rod, 1/8-Inch, 10-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
- Note : In order for this product to work correctly you must have the appropriate machine with the appropriate OCV and the correct technique.
Check StockVCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
- Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
- To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
- For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock
ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
- While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
- [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 8 clamps for larger projects, then joint weld between them.
- [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- [Contents] Welding accessories set includes 8 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check StockEVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel
- Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check StockEVIL ENERGY 2.5 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel
- Size: Joins 2.5″ OD pipe to 2.5″ OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check StockEVIL ENERGY 2.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel
- Size: Joins 2.0" OD pipe to 2.0" OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check StockEVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.75 Inch)
- Size: Joins 2.75" OD pipe to 2.75" OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check StockEVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.0 Inch,2Pcs
- Size: Joins 2.0" OD pipe to 2.0" OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check StockEVIL ENERGY Exhuast Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel (2.5 Inch,2Pcs)
- Size: Joins 2.5" OD pipe to 2.5" OD pipe, width of strap: 3inch /76.2mm..
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
- Advantages: No welding design, easy to install or remove..
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock
