Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- Butt Welding Clamps includes 16 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
- Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
- Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 16 clamps for larger projects, then joint weld between them.
Check Stock
ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
- Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 16 clamps for larger projects, then joint weld between them.
- Package Included: Welding accessories set includes 16 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock
Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
- 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
- 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
- When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
- 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials..
- 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to make sure a firm fixation.
- Use all 16 clamps for larger projects, then perform joint welding between them..
- 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
- meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check StockStrong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))
- A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
- A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
- Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check StockWeld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap
- Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
- Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check StockForney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check StockForney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound
- All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
- Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check StockWild Water Fly Fishing 12 Tenkara Fly Rod Complete Combo Starter Package with Tenkara Flies
- FLY ROD: 12', 9 sections, IM8 graphite, Tenkara rod. Has removable, laser etched butt cap to remove rod sections, 9 3/4” long cork handle. Includes....
- TENKARA LINES: 10 1/2’ chartreuse, furled nylon line with metal ring to attach tippet (qty. 1), 11' blue PVC floating line with welded loop for....
- ROD CASE: 22” hard tube rod case. Case has a carry strap and hang ring.
- FLY BOX: Waterproof, Floating, 5.25" x 3.5" x 1.25", custom box & foam design, holds up to 372 flies. FLIES: Total 12 flies.
- WHERe USED: This package is best suited for trout, panfish, small to medium streams, ponds, and backpacking. CUSTOMER SERVICE: Wild Water has English....
Check StockHogue 19012 S&W K/L Rnd Butt Conversion Rubber Grip NFG , Black
- Smith & Wesson K/L frame round butt conversion rubber monogrip no finger grooves & wood big butt cap.
- Fits round butt models 10, 12, 13, 14, 15, 17, 19, 64, 65, 66, 67, 69, 242, 296, 386, 396, 460.
- Fits round butt models 500, 520, 547, 586, 617, 619, 620, 646, 647, 681, 686, 696, 986, Governor.
- Conversion grip converts round butt frame to square butt grip.
- This grip is an open backstrap design for optimum trigger reach.
Check Stock
LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm
- 【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
- 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
- Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
- 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
- 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
- The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
- 【EASY TO USE】Electric milling method is adopted, with single ....
Check StockForney 32101 E7014 Welding Rod, 1/8-Inch, 1-Pound
- All position welding rod with digging arc, deep penetration on dirty or rust materials.
- Ideal for joints requiring deep penetration such as square edge butt welds.
- Excellent for galvanized steel and rusty/oily steel in maintenance.
Check Stock
Qiilu 2in Weld On Filler Cap Aluminum Alloy Weld On Filler Neck and Cap 2' Weld On Fuel Filler Neck with Cap Fuel Tank Parts Car Refitting(Black)
- 2" Weld On Filler Cap --- This fuel filler neck and cap is suitable for welding on 2 inch inner diameter pipe interface. The weld on fuel tank filler neck and cap is easy to install, no need complicated tools, convenient and practical for using.
- Superior Quality Aluminum Alloy --- The weld on fuel filler neck with cap is made of high‑quality aluminum alloy material, firm, anti‑rust, and durable in use. 100% brand new, please be assured of your purchase.
- Professional Manufacturing --- The aluminum weld on filler cap has excellent mechanical stability and corrosion resistance for high reliability. Precision‑machined to exact tolerances for trouble‑free performance.
- Size --- The cap diameter is about 58mm / 2.3in, cap height is about 15.5mm / 0.6in, overall height is about 81mm / 3.2in, bore is about 47mm/1.85in, neck outer diameter is 2in, neck thread and cap thread are M52x2.5.
- Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every fuel filler neck must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check StockWeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16
- For Accurate Calibration of Butt Fillet Type Welds.
- Determine the Leg Size of the Fillet Weld.
Check Stock
