Categories

Best Butt welding Concentric Reducer

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 2\ Tube OD to 1-1/2\ Tube OD

  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Ferrule Size(38MM end):51mm ferrule fits 1.5" tri clamp.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

Industrial Spot Welding Pen, Battery Spot Welding Pen Handheld Weld Machine Accessory for Industrial Spot Welding

  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
Check Stock

Battery Spot Welding Pen, Handheld Spot Welder Pen Weld Machine Accessory Handheld for Industrial Spot Welding

  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
Check Stock

DERNORD Sanitary Concentric Reducer Tri Clamp Clover Stainless Steel 304 Sanitary Fitting End Cap Reducer (Tri Clamp Size: 2 inch x 1.5 inch)

  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
Check Stock

Battery Spot Welding Pen, Handheld Spot Welder Pen Brass Automatic Trigger Handheld Weld Machine Accessory for Industrial Spot Welding

  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
Check Stock

QiiMii Sanitary Fitting Reducer Fitting SS304 Tri Clamp Ferrule Style 3\ Tube OD to 2\ Tube OD (3 INCH X 2 INCH )

  • Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Heayzoki Battery Spot Welding Pen Handheld Automatic Trigger Spot Welding Tool DC 4-12V Suitable for longterm Work, Improve Work Efficiency

  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
  • This 18650 battery spot welding pen, suitable for longterm work, improve work efficiency, made of thick brass bar..
  • Not happen that the common onepiece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • The spot welder pen comes standard with a pair of Japanese concentric ballpoint needles, which is effective..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock