Categories

Best Butterfly Fitting Valve

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • ...uality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • ...uality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 For Frigidaire Refrigerator New

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319.
  • Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve,This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to. This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built in.
  • Included: (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws.
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 for New Frigidaire Refrigerator

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319 Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to..
  • This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built into the refrigerator from the factory..
  • What’s Included? (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws & More!.
Check Stock

Outdoor Water Solutions ARS0026 7-Inch Airstone Diffuser

  • This is a 7" diffuser airstone with a 1/2" male npt fitting that fits our airstone foot valve which is also called an inline backflow valve.
  • Note: shallow or larger ponds may require multiple airstone diffuser kits..
  • Note: this air stone require an airstone foot valve to prevent water from backing up into the airline..
Check Stock

The Catalyst Fermentation System - 6.5 Gallon Plastic Conical Fermenter

  • 6.5 Gallon Conical Fermenter that separates sediment, eliminates transfers and allows you to bottle straight from your fermenter..
  • The Catalyst’s tank is made from Tritan, a food-safe, BPA-free polymer. This revolutionary material retains the same clarity and smoothness of glass, but is resistant to shattering..
  • 3” Trub Trap Butterfly Valve – the largest in the industry- is designed to work with any large-mouthed mason jar, which makes catching and storing viable yeasts or separating sediment super simple..
  • Includes: 6.5 Gallon Tank with Lid, Stand (Base, 2 Legs, 2 Support Beams, 8 Screws), 3” Proprietary Butterfly Valve, Bottling Attachment, Transfer Tubing, Tubing Clamp, Rubber Stopper, 16 Oz. Wide Mouth Mason Jar, Allen Wrench.
  • Total Height (does not include airlock): 26.25" Maximum Width: 17".
Check Stock

Lisle 19700 Valve Holder black

  • Commonly used when valve springs or valve stem seals are replaced.
  • Comes with two-step fitting for both 14 millimeter and 18 millimeter threads.
  • Thread fitting to spark plug hole and other end to air supply.
  • Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.
  • Air pressure helps prevent the valve from falling into the combustion chamber.
Check Stock

Vintermusik by Jydsk P?? N??sen & Betty Gregers Arendt

  • Hose Shut Off Valve: Heavy duty zinc alloy body with soft TPR cover for comfort. The hose shutoff valve is strong and durable,temperature resistant and anti-rust..
  • Save Time and Water: Easily adjust your sprinklers without running to and from the faucets to see if it is working!.
  • Easy to turn on and off: The Shut-off valve controls water flow. With extra-long 4cm handle for convenient turn on/off and easy to remove,even for those with strength or dexterity issues..
  • No Leaks & Anti-slip: With a solid and tight valve, it is designed to never leak or drip. The straight valve is anti-slip, which means you can grip it even with wet hands! The size of connector is 3/4",our garden hose valve can match all American standard faucets. 1 extra rubber washer and 1Sealing tape included for perfect fitting without leaking..
  • Hose Valve Application: Great for shower faucets heavy-duty shutoff valves, solid heavy duty drinking bibs manifold adapters, quality coupling fitting washers.With NSEN Hose Shut Off Valve, easily taking care of plants, showering pets, washing car, cleaning house and more situations..
Check Stock

Large, Multicolor Butterfly Balloons Foil - Pack of 6 | Big 4D Round Sphere Butterfly Birthday Balloons for Butterfly Birthday Decorations | Mylar Butterfly Balloon for Butterfly Party Decorations

  • PACK OF 6 | CREATE ENCHANTED COLORFUL BUTTERFLY THEME PARTY : Create a dreamy and fairy tale theme butterfly birthday decorations for your princess with these beautiful butterfly mylar balloons, Pack Of 6 with mainly designed around butterfly shaped and realistic details that will not only light up your theme party, also can be regarded as photography background and props for you to take beautiful selfies with your family and friends, make your party attractive with this butterfly balloon..
  • LARGE SIZE : 39 INCH | ATTRACTIVE BUTTERFLY BALLOONS WITH 4D FOIL BALLOONS : These gold foil butterfly balloons are large size of 39 Inch and 4D butterfly balloons - 22 Inch, pack of 2, Multicolor Butterfly Balloons - 39 Inch, Pack of 2 and have the shape of flying butterflies, symbolizing happiness and a new life, add fantasy and blessing to your princess fairy tale theme party, girl's birthday party and baby shower with colorful butterfly party decorations..
  • EASY TO USE | ACHIEVE MAXIMUM IMPACT : The globos de mariposas is pretty and easy to use just slowly fill the nozzle with air, when the large multi colored butterfly balloons is nearly 90% full, reduce the amount of ai....
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock