Best C H441pw2i2m

Focusrite Scarlett 2i2 Studio 3rd Gen USB Audio Interface and Recording Bundle with Monitors, Boom Microphone Stand, Microphone Cable, Pop Filter and Interconnect Cable (6 Items)

• Bundle Includes: Focusrite Scarlett 2i2 Studio 3rd Gen 2x2 USB Audio Interface and Recording Bundle, CR3-X 3-Inch Creative Reference Multimedia Monitors (Pair), MS7701B Euro Boom Microphone Stand (Black), 25-Feet XLR Male to XLR Female Microphone Cable, Pop Filter for Broadcasting and Recording Microphones, and 1/4-Inch - 1/4-Inch 8mm TS Cable (10 Feet).
• Microphone and Headphones: The CM25 MkIII condenser microphone enables you to capture studio-quality recordings that are faithful to the source, while the HP60 MkIII closed-back headphones, with a new improved design, offer high sound quality and long-lasting comfort when recording and mixing.
• Instrument Inputs: Simply plug your guitar or bass into the high-headroom instrument inputs and start recording without any clipping or unwanted distortion and keep an eye on your input level with intuitive Gain Halo metering.
• High-Performance Converters: Equipped with high-performance 24-bit/192kHz AD-DA converters, Scarlett guarantees the same professional sound quality throughout the third-generation range and the 2i2 is designed to stand up to days on the road, connecting straight....

Focusrite Scarlett 2i2 3rd Gen 2x2 USB Audio Interface Bundled with Headphones and 2 XLR Cables (4 Items)

• BUNDLE INCLUDES: Focusrite Scarlett 2i2 3rd Gen 2x2 USB Audio Interface, Knox Gear TX-100 Closed-Back Studio Monitor Headphones, and a 25-feet XLR Male to Female Microphone Cable.
• SWITCHABLE AIR MODE: Features two upgraded Scarlett mic preamps with switchable Air mode to give your vocal and acoustic recordings a brighter and more open sound.
• EASY TO CONNECT: The high impedance, high-headroom instrument inputs allow you to record guitar or bass without any clipping or unwanted distortion, while Gain Halo metering makes it easy for you to set the input level.
• INCLUDED SOFTWARE: Focusrite Scarlett 2i2 comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite, three months of Splice Sounds, three months of Avid Pro Tools subscription, and Focusrite Plug-in Collective..

Focusrite Scarlett 2i2 2-in 2-out USB Recording Audio Interface (3rd Generation) + Samson SR360 Over-Ear Dynamic Headphones, Cables and Accessories

• with two award-winning 3rd generation Scarlett mic preamps and 2 high headroom instrument inputs and outputs. Includes headphone output with gain control..
• The 24-bit/192kHz converters give your recordings clarity and distinction, allowing you to record, mix and play back audio in studio quality, Switchable Air mode breathes life into vocals, adding unique high-end detail..
• Scarlett 2i2 is beautiful, compact, and rugged and reliable on the road! It’s also bus powered, meaning that you don’t need an additional power supply..
• The Quick Start tool makes it easier than ever to get up and running. Unique, intuitive halo level indicators are provided for optimized gain staging..
• The Scarlett 2i2 comes with a whole array of recording software and sounds to choose from. (See description). OS X and Windows compatible..

Focusrite Scarlett 2i2 Studio 3rd Gen USB Audio Interface Bundle with Desktop Boom Arm Mic Stand, Mic Shock Mount for 44-47mm Microphones and Pop Filter (4 Items)

• Bundle Includes: Focusrite Scarlett 2i2 Studio 3rd Gen 2x2 USB Audio Interface with Pro Tools, Microphone Suspension Boom Scissor Arm with 5/8-27 Threading, Basic Microphone Shock Mount, and Pop Filter.
• Microphone and Headphones: The CM25 MkIII condenser microphone enables you to capture studio-quality recordings that are faithful to the original source, while the HP60 MkIII closed-back headphones, with a new improved design, offer high sound quality and long-lasting comfort when recording and mixing.
• Instrument Inputs: Simply plug your guitar or bass in to the high-headroom instrument inputs and start recording without any clipping or unwanted distortion and keep an eye on your input level with intuitive Gain Halo metering.
• Included Software: Your Scarlett 2i2 Studio pack comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and Pro Tools First Focusrite Creative Pack.
• Free 3-Month Splice Sounds Subscription: Focusrite has partnered with Splice to give 3rd Gen Interface owners a free 3-month Splice Soun....

SparkFun Digital Temperature Sensor - TMP102 (Qwiic)-Compatible with Arduino and other Single-board computers Easy-to-Use I2C sensor Plug-and-Play breakout board Runs from 1.4-3.6V input Use with 3.3V

• Uses the I2C interface. I2C Address: 0x48 by default (Three additional addresses available, as well). 12-bit, 0.0625°C resolution. Typical temperature accuracy of ±0.5°C.
• 3.3V sensor. Supports up to four TMP102 sensors on the I2C bus at a time. 2x Qwiic Connectors.
• The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V..
• I2C communication uses an open drain signaling, so there is no need to use level shifting..
• The alert pin is an over temperature alert, which has an open-drain and is pulled up through a 10kΩ resistor. The alert can also be read over I2C.

Focusrite Scarlett 2i2 Studio 3rd Gen 2-in, 2-out USB Audio Interface with Microphone & Headphones, MBS5000 Boom Arm with XLR Cable & Kellopy Pop Filter Bundle

IOCrest SATA II 4 x PCI RAID Host Controller Card SY-PCI40010

• Compliant with SATAII Specification Revision 1.1.
• Compliant with Gen2i, Gen2m SATA II electrical Specification Revision 1.0.
• Backward compatible with SATA 1.0 Specification.

SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield Compatible with Arduino R3 Mega2560

• Sunfounder I2C LCD 2004 displays characters of 4 rows with 20 characters in each..
• I2C Address: 0x27 or 0x3F.Compatible with Arduino R3/2560 board. http://wiki.sunfounder.cc/index.php?title=I2C_LCD2004.
• Professonal Support: SunFounder customer service team are always willing to solve any question from our customers .Any problem, please contact us on Amazon..

AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module

• The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
• The main resources: PCF8574, I2C interface, the 8-bit parallel.
• Typical applications: for I / O resource constraints the MCU I / O expansion.
• PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
• PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).

4Pcs INA219 I2C Bi-Directional DC Current Power Supply Sensor Breakout Board Module I2C IIC Interface

• INA219 module is an I2C interface with a drift, bi-directional current / power monitor integrated circuit (IC), and further expand the energy-saving....
• INA219 I2C Bi-directional DC Current Power Supply Sensor, Working Voltage 3~5V.
• INA219 module small size, low cost, high accuracy. It not only can monitor the voltage drop across a shunt resistor on the sensing shunt supply....
• INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV. The....
• Appliaction:The module is used for I2C port zero drift / bidirectional current / power monitoring sensor module. The device is available in a SOT23....

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

• The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
• BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
• Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
• The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
• The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..

AITRIP 5 pcs CJMCU-219 INA219 I2C Interface Bidirectional DC Current/Power Monitoring Sensor Module for Arduino Raspberry Pi

• The INA219 achieves a maximum error accuracy of 1% over the -40 ° C to + 85 ° C temperature range with a maximum offset of 100 uV..
• Used for I2C port zero drift / bidirectional current / power monitoring sensor module.
• INA219 I2C Bi-directional DC Current Power Supply Sensor.

AOICRIE 5PCS PCF8574T PCF8574 IO Expansion Board Module I2C IO Expander Module (5 PCS)

• ✔I2C interface, I / O expansion module, two I / O scalability 8 I / O (up to 8 simultaneous use the PCF8574 expanded to 64 I / O).
• ✔Typical application: I / O resource shortage MCU I / O expansion.
• ✔Main resources: the PCF8574 I2C interface, 8-bit parallel.
• ✔Package Included: 5 x PCF8574 IO Expansion Board I/O Expander I2C-Bus Evaluation Development Module.
• ✔We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution..