Categories

Best C pvc Extrusion Line

Duda Energy LPpvc075-025ft 25' x 3/4' ID Low Pressure Clear Flexible PVC Tubing Heavy Duty UV Chemical Resistant Vinyl Hose Water Oil

  • Id: 3/4", OD: 1", wall thickness: 1/8 inch.
  • Max working pressure: 25 psi, bursting pressure: 75, minimum bend radius: 3-1/4 inch.
  • Temperature range: 25°f to 150°f (-4°c to 66°c).
  • Firmness: 67a (soft), uv-resistant, Color: clear-transparent, single line PVC.
Check Stock

Duda Energy LPpvc025-025ft 25' x 1/4" ID Low Pressure Clear Flexible PVC Tubing Heavy Duty UV Chemical Resistant Vinyl Hose Water Oil

  • Firmness: 67a (soft), uv-resistant, Color: clear-transparent, single line PVC.
  • Temperature range: 25°f to 150°f (-4°c to 66°c).
  • Id: 1/4″, OD: 3/8″, wall thickness: 1/16 inch.
  • Max working pressure: 35 psi, bursting pressure: 105, minimum bend radius: 1 inch.
Check Stock

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

QuQuyi 1-1/4

  • Vacuum/high pressure rated/steel wire reinforced.
  • Max working pressure: 87 psi, bursting pressure: 261.
  • Temperature range: 25°f to 150°f (-4°c to 66°c).
  • 【Parameters】Id: 1-1/4″, OD: 1-1/2”, wall thickness: 1/8”.
  • Firmness: 73a (firm), uv-resistant, Color: clear-transparent, single line PVC.
Check Stock

HATCHBOX Temperature Color Changing PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm

  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Temperature Sensitive Color Change PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant / Below 22°C – Purple / 22°-31°C – Salmon Red / Above 31°C – Orange.
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F).
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

HATCHBOX Metallic Finish PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, METALLIC FINISH PLA FILAMENT: The new line of Hatchbox Metallic Finish PLA creates a smooth, shiny appearance and metallic finish straight off the printer! With no post polishing needed, you can instantly design prints with a dynamic metal-like finish that will stand out from the crowd!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to....
Check Stock

HATCHBOX Metallic Finish PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, METALLIC FINISH PLA FILAMENT: The new line of Hatchbox Metallic Finish PLA creates a smooth, shiny appearance and metallic finish straight off the printer! With no post polishing needed, you can instantly design prints with a dynamic metal-like finish that will stand out from the crowd!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to....
Check Stock

HATCHBOX Metallic Finish PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Purple

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, METALLIC FINISH PLA FILAMENT: The new line of Hatchbox Metallic Finish PLA creates a smooth, shiny appearance and metallic finish straight off the printer! With no post polishing needed, you can instantly design prints with a dynamic metal-like finish that will stand out from the crowd!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to....
Check Stock

HATCHBOX Metallic Finish PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, METALLIC FINISH PLA FILAMENT: The new line of Hatchbox Metallic Finish PLA creates a smooth, shiny appearance and metallic finish straight off the printer! With no post polishing needed, you can instantly design prints with a dynamic metal-like finish that will stand out from the crowd!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to....
Check Stock

Polymaker Polysher - Post Processing Device to Smooth Print Surface with IPA Alcohol for PolySmooth PVB 3D Printer Filament & PolyCast 3D Printing Filament

  • 003cbr003e003cb003ePost-Processing Machine 003c/b003e: Polymaker Polysher is a post-processing machine designed for polishing the extrusion-based FDM/FFF 3D printed parts with PolySmooth to achieve a shining, layer-free surface finish..
  • 003cbr003e003cb003eSafe & Easy To Use: 003c/b003e No heating is involved – The nebulizer technology requires only a very small reservoir – It is a liquid-phase polishing rather than vapor-phase polishing process. All electronic components are properly sealed, and no spark can be generated inside the chamber. Placing it on your desk, simply twisting the dial to set the time, the post-process will start and end automatically..
  • 003cbr003e003cb003e Low Costs:003c/b003e The Polysher is not only affordable but its running cost is incredibly low too. Isopropyl alcohol (also known as isopropanol) or Ethanol are both suitable. You can choose whatever is more easily available for you..
  • 003cbr003e003cb003eNOT A 3D Printer: 003c/b003ethe Polysher is NOT a 3D printer. You still need a extrusion-based, FDM/FFF 3D printer in order to use our new products. Specifically, PolySmooth is a new filament that you can print with your 3D printer, just like how you print with your PLA. Once the printing is done, you can post-process your pri....
Check Stock

DURAMIC 3D TPU Filament 1.75mm Black, TPU Flexible Filament 95A, Soft TPU 3D Printing Filament, 1kg Spool, Dimensional Accuracy +/- 0.05mm, Black 1 Pack

  • ...m with 100% tolerance ±0.05mm, 99.9%±0.04mm，99%±0.03mm and 97% ±0.02mm. The consistency and true advertisement of diameter ensures you clog-free printing experience..
  • SMOOTH & STABLE PRINTING - Duramic TPU filament 1.75mm is produced with jam-free patent, along with excellent layer adhesion, you can get smooth extrusion and stable printing experience without clogging. Recommended Nozzle Temp 220±10°C, bed temp 25-60°C and printing speed 20-40mm/s..
  • Compatible with not only direct extrusion printers but also bowden extrusion printers and 3d pens in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling..
  • RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you’re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm TPU filament, 1 x Aluminum foil Resealable bag with desiccant for better storage of unfinished spool. 7/24h Professional printing setting advice from technique support team..
Check Stock