SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338
- ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
- Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
- ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
- The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
- ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
- ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock2T cable pulling swivel,cable grip puller for Wire Rope, Pulling4409Lb
- 【Method of operation】：You slip the cable to be tensioned in from the side, The tool clamps onto the cable and the grip tightened as you pull on the loop end. The grip can slip if the cable is wet or coated with dirt or a lubricant, so it should be clean and operated when dry (not during or after a rain)..
- 【Function】 - It can adjust the overhead power lines, which can solve the problem of sag and tight it..
- 【High Quality】 - Made of high quality alloy steel, this clamp is durable, stable, and high strength..
- 【Keep Safe】 - Due to the anti-chip safety device on the clamp mouth, this clamp can make the safety and no jumper. And the tong is smooth, which can reduce the damage to the lead..
- 【Usage】 - This clamp fit for Cable from 5/32 - 7/8 Inch. With the 2Ton/4409 Lb of max safe load, it is suitable for all kinds of steel cables and cables.
Check Stock
SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299
- 【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
- 【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
- 【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
- 【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....
Check Stock
WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut
- These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
- You will get: 5 packs of high-quality stainless steel wire rope locking devices..
- Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
- The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
- Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock
24" Cable Hose Clamp Pliers Cable-Type Flexible Hose Clamp Pliers for 18mm-54mm Hose Clamps + Flat Band Hose Clamp Pliers for Removal and Installation of Ring-Type or Flat-Band Hose Clamps
- 【Excellent Material】：The 24" cable hose clamp pliers and the flat band hose clamp pliersare made of high-carbon steel with a manganese phosphate coating.Can effectively prevent rust and corrosion, longer service life and more durable..
- 【Labor-Saving Design】:The handle is made of PVC material, non-slip and easy to grasp, the impregnated ergonomic handle helps prevent hand fatigue during long-term use, you can use it very easily..
- 【Application】:The heavy-duty 24" cable hose clamp pliers allows you to remove plastic and/or metal self-tightening hose clamps with diameters of 18mm-54mm.The flat band hose clamp pliers can be used on most ring-type or flat-band hose clamps for easy removal and installation..
- 【Easy to use】:The flexible cable hose clamp pliers provides access to flat hose clamps located in hard-to-reach areas, making clamp removal and installation easier.The band hose clamp pliers locking the ratchet can keep the clamp open,flexible and convenient..
- 【Purchase with Confidence】:We have superior after-sales service,please feel free to contact us....
Check StockEC5 Jumper Cable, Yeworth Automotive Replacement Car Jumper Cable Alligator Clip Clamp to EC5 Connector for 12V Portable Emergency Car Jump Starter Booster
- Usage of car jump starter: 1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole.
- 2. Plug the clamp EC5 into the jumper starter's socket.
- 200A instant Maximum start current, fits most brands of mini portable jump boxes, mobile chargers..
- Compatible with most 12V mini jump starter..
- Strong alligator clamp with full copper material cable, make sure the great qulity and safety protection..
- What You Get: 1 x Yeworth Jumper Starter Cable Clamp.
- Friendly customer service always ready to assist you..
Check Stock
Cable Clips for Cable Management Cord Organizer, 6 Sizes 300 PCS Nylon R-Type, 3/16'' 1/4'' 3/8'' 1/2'' 3/4'' 1'' Black Plastic Screw Mounting Cord Fastener Clamp Assortment Kit with M4 Screws
- 【Best Combination】 – There are a total of 150 pieces nylon R-type cable clamp in 6 sizes: 3/16’’ 1/4’’ 3/8’’ 1/2’’ 3/4’’ 1’’. These sizes contain almost the 6 most commonly used sizes in our life, such as TV cords, routing cables, snowmobile wires, LAN cables, Ethernet cable, computer and electrical power cables , desk wall cables..
- 【Top Quality Material】– Made of PA66 nylon plastic, aging resistance, corrosion resistance, cold resistance, UV resistance, fire protection, fire rating reaches to 94V-2. So it is very safe, durable and convenient..
- 【Exquisite Storage Box】- We want our customers to be simple and clear every time they use R-type cable clamp, so we put 6 sizes R-type cable clamp in 6 grids and each grid is marked with size label. We also 1: 1 configured the appropriate M4 screws for your R-type clamp..
- 【Easy to Organize】 – Only need to put the wire into the round hole, and tighten the wires with one screw. Fast and convenient. From then on, organizing your space becomes a piece of cake for you. Besides, they can be used repeatedly. Nylon cable clamp assortment is not e....
Check Stock
WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black
- USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
- cable set with terminal lugs and cable set with Dinse connectors..
- Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
- Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
- Heavy duty 300-amp stick electrode holder with strong jaw spring.
- both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check StockPintech Percussion SILENTRIM10 10\ Electronic Drum Trigger
- Bundle includes: Alesis Dual Zone Drum Pad, Rack Clamp, L-Rod and Silverline Audio 10ft Trigger Cable.
- Great response and feel for a natural drumming experience.
- Compatible with: Nitro Mesh Kit, Nitro Kit, DM Lite Kit, Burst Kit.
- *Clamp/Mount is only compatible with the above listed Alesis Kits and will not work with any other drum kit.
Check StockSMALLRIG HDMI Cable Clamp Lock Compatible with Sony A7RIII A7II A7RII A7SII, SMALLRIG Cage 1660, 1673, 1675, 1982, 2087-1679
- The HDMI Cable Clamp Lock is specially developed for the SmallRig cage 1982 / 1660 (for Sony A7II A7RII A7SII), Cage 2087 / 2098 (for Sony A7RIII / A7III), also compatible with SmallRig kit containing cage 1894 / 2014 / 2015 / 2103.
- Secure tightly with 2 1/4"-20 screws, unsmooth surface on the clamp opening could increase the friction to keep the cable from falling off.
- This HDMI data transmission Cable Clamp provides 2 M5 threaded holes for attaching screws for locking USB Cable.
- The wingnut is made to help you tighten the HDMI cable and prevent from accidentally dropping. It could be adjusted by stretching if the wingnut block your device.
- Friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty.
Check StockCoadura Cable Clamps 1 1/2 Inch - Rubber Cushioned Stainless Steel Cable Clamp 30pcs Wire Clamps Hose Clamps Loop Clamps Pipe Clamps
- Made of high-quality materials - The cable clamps are made of 304 stainless steel with high-quality rubber pads. The cable clamp is sturdy and....
- Size - Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1 1/2 inch. Fit for 1 1/2....
- Easy to install - The R-shaped design is easy to install and disassemble. You only need M6 (6mm) bolts and nuts to easily complete your installation....
- Widely used - Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. For wiring, cables, pipe,....
- Environmental friendly - It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which....
Check Stock
TSIN 120PCS Half-clamp J-hook black with nails, for Pex Tubing pipes support 1/2 inch 3/4 inch, wire and cable fixing
- Package: You will receive 120pcs black half-clamp J-hooks with nails, 60pcs 1/2-inch half-clamp J-hooks and 60pcs 3/4-inch half-clamp J-hooks, complete specifications and sufficient quantity You use..
- Material: This half-clamped J-hook is made of thick environmentally friendly plastic material, which is durable and not easy to age. It uses high-performance steel nails with high hardness. It is a perfect tool for fixing pex pipes, wires and cable pipes..
- How to use: The installation is very simple, fix the pex tube or cable, take out the half-clamp J-hook, and use the clamp to fix the wire or PEX tube to tap the steel nail to complete the installation..
- Widely used: suitable for cement walls, brick walls, concrete walls, wires, cables, plastic pipes and other products that need to be fixed.
- Multi-function: It is convenient to use, strong fastening force, it is not easy to fall off after the PEX pipe wire and cable duct is stuck, and it also avoids wire entanglement. It is an ideal solution for wiring and fixing PEX pipes..
Check Stock2 Pack 14 Ft Xtreme Control Cables Fits for Johnson, for BRP, CCX20514
- Clamp Size(Each): 3.5 x 1.6 x 0.7cm/1.4"" x 0.6" x 0.28"(L*W*T).
Check Stock
