150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ... for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 ....
Check Stock

Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver

  • A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
  • It is a service entrance cable accessory, but not a metal cable.
  • The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
  • Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.
Check Stock

Low Voltage Wire Connectors Landscape Lighting Connector 12-18 Gauge UL Listed Cable Splice Connector for Landscape Lighting/Pathway Light/Spotlight, Pack of 8

  • ✅【COVERING 8 LIGHTS】Not as other connector which TWO PIECES PER CONNECTION,each of our low voltage connector per connection. Other connector 8pack is equal to 4 pairs, just covering 4 lights, our 8 pack is equal to 8 pairs, COVERING 8 LIGHTS. New Design but still work well !.
  • ✅【SUPER EASY TO INSTALL】NO Splicing/Crimping or tools required! First, insert and lock in your conductors from the landscape lights. Second, squarely place and compress the low voltage cable connector around each side of your low voltage feed wire. Last, lock the connector. Quickly and easily install low voltage wire to your lighting fixture in 2 minutes or less!.
  • ✅【MORE COMPATIBLE】Perfect match for 12 /14 /16/18 gauge wire of low voltage landscape lighting. Wide used for garden, pathway, walkway, driveway, yard, patio, lawn, walls, trees, flags etc.
  • ✅【RELIABLE SAFETY AND QUALITY】As UL-listed landscape lighting low voltage wire connectors,every single wire connector is well made and secure fit with a great connection, will be fine choice for your long term use of outdoor lighting fixtures..
  • ✅【SOLUTION FOR THINNER CABLE 】The low voltage connector is designed for SPT-1 or SPT-2 light wire, if your light wire is thinner than that type, please stripping and....
Check Stock

GameGlass

  • Realistic Yoke Controls provide the perfect introduction for the aspiring pilot or enhancing muscle memory of experienced pilots for the perfect translation of real-world skills.In the Box : Flight Yoke with 5.9 ft (1.8m) USB Connector Cable, Flight Throttle Quadrant with 4.92 ft (1.5m), PS/2 Connector Cable, 2 Desk Clamps.
  • Stainless Steel Yoke Shaft - Robust, smooth and accurate control of your virtual aircraft in flight simulators.
  • POV Hat, 14 button controls, and 3-position mode switch offer at least 54 programmable controls, giving you most of your aircraft’s functions under your fingertips.
  • 2 position desk clamp provides mounting flexibility for a wide range of desks with a robust, secure clamping force to ensure your controls stay where you need them..
Check Stock

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock

Born To Protect (Elite Force Security Book 1)

  • Realistic Yoke Controls provide the perfect introduction for the aspiring pilot or enhancing muscle memory of experienced pilots for the perfect translation of real-world skills.In the Box : Flight Yoke with 5.9 ft (1.8m) USB Connector Cable, Flight Throttle Quadrant with 4.92 ft (1.5m), PS/2 Connector Cable, 2 Desk Clamps.
  • Stainless Steel Yoke Shaft - Robust, smooth and accurate control of your virtual aircraft in flight simulators.
  • POV Hat, 14 button controls, and 3-position mode switch offer at least 54 programmable controls, giving you most of your aircraft’s functions under your fingertips.
  • 2 position desk clamp provides mounting flexibility for a wide range of desks with a robust, secure clamping force to ensure your controls stay where you need them..
Check Stock

Honeycomb Aeronautical Alpha Flight Controls Yoke & Switch Panel

  • Alpha Flight Controls Yoke and Switch Panel - Mounting Plate with 3M Micro-Suction Pad - 2x Clamp - USB-C Cable - Yoke Connector Cable - Rubber Screw Caps - Manual - Honeycomb 5 Year Limited Warranty.
  • Two Vertical 2-Way Switches, 8-Way Hat Switch, Two buttons.
  • Solid Steel Shaft wtih Dual Linear Ball Bearing & 180 Degree Yoke Rotation.
Check Stock

MOOKEERF PL259 CB Coax Cable 50ft, RG8 UHF Male PL-259 Cable 50 Ohm UHF Jumper Cable for CB Radio, VHF Radio, SWR Meter, Antenna Analyzer

  • ...er conductor of this pl259 cable is made of copper clad aluminium, and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.This RG8 coaxial cable is equivalent to lmr400 and rg8u..
  • ⭐Prevent Fall Apart or Break : Connection between UHF male connector and RG8 coaxial cable end is equipped with a 2.2" heat shrink tube with lined adhesive which is longer than other cable 's 1.1” heat shrink tube . And the connector is use clamp design but not crimp. It is very heavy duty and connectors are well integrated into cable. They are preventing breaking easily when using..
  • ⭐Durable : The jacket of this cb cable is made of high-quality PVC,which is waterproof and durable.The shell of the uhf connector is made of copper nickel plated,which could be better in resist oxidation and corrosion.The shrink tubing of this pl259 coax cable is built with an adhesive inner wall, sealing against moisture and water or other contaminants. It is very sturdy to work well in outdoor extreme weather..
  • ⭐Applications : This RG8 pl259 male to male coax cable could be used for CB ham radio, HF amateur radio, marine boat VHF radio, antenna, swr meter, surge protector, Walkie Talkies.
Check Stock