Categories

Best Cable Pulling Rodder

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

6MM 425FT Fish Tape Fiberglass Reel Wire Cable Running Rod Duct Rodder Fishtape Puller,Duct Rodder Rodder Puller,Running with Cage and Wheel Stand

  • Fish Tape Fiberglass Product Specifications: 6mm (1/4inch) Length: 130 M (425ft).
  • High Quality Material: Fiberglass and polyethylene plastics have good aging resistance and are not easy to break..
  • Abrasive wheel:Glass rubber wear-resisting roller, easy to implement, durable wear-resisting, long service life..
  • Feature:The rodder puller has the advantages of time saving, labor saving, improved work efficiency, etc..
  • Note:The maximum straight-line traction of the rodder puller is 2.5 tons. It is not allowed to use high-power machinery for traction in the 90-degree right-angle environment, otherwise it may break..
Check Stock

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35931 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 3400lb Approximate Break Strength, 14.00\ Mesh Length, .50–.74\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 14 in. mesh, double weave and split lace design with 0.50-0.74 in. cable diameter. It has a break strength of approximately 3400 lb..
Check Stock

Woodhead 35935 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 8100lb Approximate Break Strength, 26.00\ Mesh Length, 1.50–1.99\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 26 in. mesh, double weave and split lace design with 1.50-1.99 in. cable diameter. It has a break strength of approximately 8100 lb..
Check Stock

9-12MM Mesh Cable Puller Socks Galvanizing Eye Mesh Cable Wire Grip Metal Cable Socks Wire Grip Cable Puller Sock

  • SIZE CHARACTERISTICS: 9-12MM cable pulling sock, with Force 450N, equals 45kgs..
  • MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
  • DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
  • FEATURES: With easy operate snap design, easily connect the cable grip sock with your pulling tools, saving time, improving work efficiency..
  • APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling. Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
Check Stock

Southwire 58281040 1/2 in. Pulling Grip

  • Confidently pull wire and Cable with these wire mesh pulling grips. Wire mesh basket securely holds Cable, while swivel head minimizes Cable twisting.
  • For pulling wire up to 1/2"" in diameter.
Check Stock

Street Racing Flag Hoodie Outlaws Drag Race American

  • Patriotic Drag Street Racing Hoodie For American Fans Authentic MotoMavens Merchandise.
  • The perfect gift for any hot rodder, street racer, boost junkie, JDM style to wear to the drag strip, street racing, car show, car club or anywhere gear heads hang out!.
Check Stock

NEIKO 02256A Come Along Winch 5-Ton 10,000 Lbs Pulling Capacity 10Ft 3 Hook Heavy Duty Power Cable Come Along Tool with Dual Gears Hand Winch Cable Automotive Hoist Winch Puller Recovery Gear

  • 5 TON COME ALONG WINCH: Heavy-duty mini come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds..
  • WINCH HOOK: Heavy duty puller steel construction for added durability.
  • hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off..
  • RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long..
  • DOUBLE GEAR MANUAL WINCH: Double-gear design locks on for evenly distributed force and easy to gauge notched pulling action for an easy, smooth, and consistent. Max vertical load capacity is also called weight capacity of 2 tons or 4,000 pounds..
  • LEVER ARM: Includes long industrial hand ratchet handle with PVC coated grip for leverage and 3 latching hooks for added safety and versatility when going off road vehicle recovery, pulling fences, logs, stumps, or rocks..
Check Stock