EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

J Bryant Gym Machine Accessories for 5mm Cable Ball Stopper Interface Port Components Fitness Equipment Wire Rope Port Joint Replacement Parts for Home Gym Machine Use

  • SIZE: The ball is 4cm diameter, with 1cm hole. The bowl-shape plate has a 38mm diameter, with 7mm hole. The metal eyelets terminal is used for cables with a diameter of 5mm and an internal steel wire diameter of about 3mm. The wire rope clamp is for a 5mm rope or cable..
  • DURABLE MATERIAL: The ball is made of high quality plastic, the bowl-shape plate is made of metal alloy. The eyelet terminal is made of metal alloy. The wire rope clamp and thimble are made of 304 stainless steel..
  • USE: Use a hydraulic crimper (plier) tool to link the cable with the metal eyelet terminal. The ball, bowl-shape plate and the terminal.
  • you can use as ball stopper set on cable machine. Put the wire rope thimble together with the clap and cable, it can use as clothesline or fence line, the thimble and clamps are wear-resistant..
  • You can choose the appropriate connector type according to the training equipment or sports environment, which is convenient and practical..
Check Stock

CZC AUTO Battery Terminal Connectors Top Post Car Battery Cable Terminal Clamp Set for Car Truck Van RV Boat, 1 Pair

  • DURABLE BATTERY TERMINAL END: made of high-quality zinc alloy with brass plating, which has excellent conductivity and flexibility to reduce voltage distortion and power losses. With nuts and screws to fix cable for a hassle free installation.
  • EFFICIENT BATTERY TERMINAL CONNECTOR: CZC AUTO leisure battery terminal connectors are marked with "+" "-" sign on their surfaces. Easy to identify the positive and negative to prevent the risk of electrical shock. Easily attach and remove cable connectors, great fit on leisure battery.
  • SUITABLE FOR BATTERIES WITH DIAMETER OF THE PILE HEAD: positive: 0.67-0.75'', negative: 0.59-0.67'', for most top post batteries with the standard post. Ideal for maintaining the batteries over time.
  • WIDELY APPLICATION: apply to most conventional terminal batteries with cylindrical dimensions. CZC AUTO car battery connectors are suitable for battery of car, caravan, motorhome, boat, truck, vehicle, RV, ATV and etc.
  • PROFESSIONAL BATTERY TERMINAL: CZC AUTO battery connectors are specially designed for users who frequently replace batteries. Can not only prevent the battery from leaking when not in use, but also stabilize the current during use. Whether the battery is turned on or off, our terminal can provide protection for your ....
Check Stock

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

  • SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
  • The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
  • The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
  • Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
  • Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
Check Stock

Vemote SAE Battery Connector 10AWG SAE to Ring Terminal Harness with 15Amps Fuse 2 Pin SAE Quick Disconnect Connector 2FT Extension Cable for Motorcycle RVs Boats etc.

  • [SAE To Ring Terminal Cable]: 10AWG 100% copper heavy duty wire, 2ft cable with 15A fuse for electrical protection.
  • Compared with other SAE 2-Pin Harness, our 10 gauge cable is more flexible and thicker..
  • [Easy to install]: Simply unscrew the battery bolts, slip these ring terminals on, and tighten the battery bolts down. .
  • [Convenient for you to charge]: Ring terminal harness allows you to connect the battery quickly without having to take the seat off. You can use this quick connector to charge the battery or to connect other accessories to your battery..
  • [Wide compatible]: Our SAE to O ring terminal harness is the best way to keep a battery charged on a Motorcycle, Boat, Cycle, Bike, Car, Tractor, Riding Mower, ATV etc..
  • [With Weatherproof Cover]: Attached weatherproof dust cover protects 2-pin quick disconnect SAE terminal end from raindrops and dusts..
Check Stock

GELRHONR 1Ft RCA Male Plug to AV Screw Terminal Cable, Free-Soldering,Phono RCA Cable Audio Adapter to 2 Screw Terminal Female Audio/Video Connector-2PCS

  • ✪ RCA to Screw Terminal adapter Cable:Can extend the length of the RCA Audio male cable and audio signal transmission,connector for RCA to connect the audio and video interface of the device.Such as home theater, background music, converter, etc., for transmitting audio and video signals..
  • ✪ RCA to AV Screw Terminal with Solderless type:Easy to use,stripped about 1/2" of wire end.After that simply loosen the terminal screws with a Phillips screwdriver, insert the cable, and screw it tightly..
  • ✪ Gold-plated design:Gold plated connector makes it durable for using and improve the signal transmission.Our RCA cable audio adapters make perfect transmission effect.
  • ✪ EASY INSTALLATION,Positive +/ Negative marked:Clearly marked, Positive +/ Negative - points are labeled in the black plastic housing with molded letters.Pay attention to the polarity when connecting the wires..
  • ✪ Wide applications: suitable for most audio/video speaker CCTV applications for RCA cable..
Check Stock

Sound Storm Laboratories AKS8 8 Gauge Car Audio Amplifier Amp Complete Kit Wiring Installation with Install Wire Cables and RCA Interconnect

  • 17' 8-Gauge Red Power Cable, 3' 8-Gauge Black Ground Cable.
  • 16' 18-Gauge Blue Turn-on Wire, 20' Speaker Wire, Rubber Grommets x 2.
  • 16' High Performance RCA Interconnect, 6' Split Loom Tubing.
  • Competition High-Quality Fuse Holder, 5 / 16" Gold-Plated Ring Terminal.
  • 4" Wire Ties x 7, #10 Gold-Plated Ring Terminal, 1 / 4" Gold-Plated Ring Terminal.
Check Stock

AUVIO S-Video Cable 12-ft. 15-229

  • Size:(28CM/11inch) Colour:(Black) Package Quantity:(1pack) Material: PVC plastic Features: S-Video 4Pin Mini DIN Male to 2 S-Video 4Pin Mini DIN Female Video Y Splitter Extension Cable.
  • Connector A: 1*4 Pin Mini DIN S-Video Male adapter ,Connector B: 2* 4 Pin Mini DIN S-Video female Y splitter cable..
  • Could be used to split a DVD output to two TVs with S-video inputs. Will display the same source..
  • Ideal for monitors, TV's, projectors, camcorders, VCRs, DVRs/PVRs, DVD players, and other video devices Video Y splitter signal transmission..
  • Note: The S-terminal line is a standard 4-pin thread for 4- and 7-hole S-terminal holes. (9-hole S-terminal hole is not available).
Check Stock

WEARNES CAMBION 570-2641-01-01-19 Terminal, Turret, 8-32, Solder, White

  • High copper alloy reversible cap terminal for joining cable to equipment pads.
  • Tongue is side formed to provide adequate clearance and terminal is designed for one-wrench installation.
  • Measures 5.62-inches length by 1.8-inches height.
Check Stock

Parts Unlimited 12V Heavy Duty Battery - HYB16A-AB HCB16A-AB

  • Factory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion.
  • Patented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durability.
  • Heavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storage.
  • Large over the partition straps and welds increase durability, power output, and life.
  • Patented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitment.
Check Stock

zdyCGTime USB 2.0 A Screw Terminal Block Connector Cable USB 2.0 A Male Plug to 5 Pin/Way Female Bolt Screw with Shield terminals Pluggable Type Adapter Connector Converter Cable(30CM/2Packs)(Male)

  • Size:Length(30CM/12Inch)Colour:(Black) Package Quantity:(2packs) Material: Plastic & Metal Features:DIY USB 2.0 A Male Bolt Screw Terminal Pluggable Type Block Connector Cable.
  • Can extend the length of the USB 2.0 A cable,5-pin (way) bolt screw terminal pluggable connector can be plugged into the USB A 2.0 plug, Then connect the socket to the other wires, The length of the USB cable can be extended..
  • Product Applicable Equipment: Computer and other USB interface devices, Data transmission and charge extension function..
  • Wire range: AWG28~16, Pin: 5way/pin, Compact design and reliable connection for the male USB to secrew terminal adapter cable.
  • No soldering required, easy to use, Requires only a screwdriver and a wire stripper to terminate USB cables, Saves time and hassle for installers..
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock