Ecore Measure Tool with scale For Brake Shoe Gauge Auto Brake pad
- Measuring the distance between the lower side of the backing plate and brake disc..
- Designed for both internal and external brake pads, features a 1.5mm and calibration check marking.
Check StockGram Scale, Mafiti Kitchen Scale Digital Weight Mini Grams Jewelry Scale 3000gx0.5g with LCD Display Stainless Steel for Cooking Baking Jewelry Weight Postal (Battery no Include) 1Pack
- 【Mini Size】 - Please NOTE there are 3 transparent plastic case covered the scale need to be removed before use, and the compact size makes it smaller than our books, takes up minimal space on your kitchen..
- 【Fashion Design】 - plastic frame ABS and stainless steel plate make the scale durable and lightly. LCD display with blue back-lit make sure you can see clearly in the dark..
- 【Smart Indication】 - this Digital Kitchen Scale equipped with high sensitivity gravity sensor, also can alert users for low battery power, overload, and uneven surface placement..
- 【Muti-Function】 - four single operate buttons, POWER/ MODE/ TARE/ PCS to make it easily operate and wide weigh range grams, with units between g, oz, ozt, dwt, ct, gn. (NOTICE: When the scale is inaccurate, to calibrate method as below: Press and hold M to enter calibration, press M again to get into calibration mass, then press T to cycle through calibration masses. While mass value is still flashing, add weight and press M again and it will say PASS and calibration is done).
- 【Mafiti Guarantee】 - 31 days money back and Replace instead repair, lifetime customer sale after service. Any problem feel free to contact us..
Check StockSteel 26 Spline Clutch Alignment Tool
- Widely Application: This correction tool is very suitable for use on most cars and is very practical..
- The Scope of Work: The range of the calibration tool for automotive clutch vacancy is 14.4-2120.9-29mm..
- Premium quality Material: Clutch Plate Alignment is made of material of plastic, not easy to damage the equipment, and avoid unnecessary losses..
- Product Introduction: This tool can quickly complete the work of adjusting the clutch and pressure plate with one hand before assembly..
- Pretest: This has been thoroughly quality tested before shipping to ensure product perfect. If you are not satisfied, we accept all of the return, replacement or refund requests..
Check StockFEELWORLD FW703 7 Inch IPS 3G SDI 4K HDMI DSLR Monitor Full HD 1920x1200 On Camera Field Monitor with Histogram for Stabilizer Cameras Rig
- 7″ IPS screen 3G-SDI 4K HDMI camera field monitor,Full HD 1920×1200 high resolution,High brightness: 450cd/m2,High Contrast: 1200:1,Aspect Ratio 16:10,Viewing angle: 80°/80°(L/R) 80°/80°(U/D), wide 160° viewing angle makes it easy for multiple members of the crew to watch it at the same time.
- Inputs:3G-SDI, HDMI,outputs:3G-SDI, HDMI, Stereo Headphone, Speaker (built-in),support 4K HDMI input and output.
- Portable small size monitor,320g lightweight,ultra-thin design 0.87 inch thickness, compact and rugged for stabilizer,it’s easy to hold in your hands.
- Professional Rec.709 HD color standard, and color calibration technology, with the professional instrument calibration at the factory, it can achieve monitor calibration efficiently and get accurate color reproduction easily, do not distort the color, show the real image when you shooting video.
- 【Package Include】1× FW703 Monitor, 1× Mini HDMI Cable, 1× Sunshade, 1× Hot Shoe Mount, 1× F970 Battery Plate, 1× Operation Manual【Note: battery not include】【One year warranty】We are the FEELWORLD Official Store, if you have any question, just feel free to contact us, we will do our best to help you solve the problem..
Check StockHomeBrewStuff Inline Thermometer for wort chiller and kettles
- 1/2" MPT threads for easy installation into a brew kettle, mash tun, plate chiller or counterflow chiller.
Check StockGemOro Auracle AGT1 Plus Digital LCD Gold & Platinum Fine Metal Tester
- - New nickel plated stainless steel testing plate.
- - New improved fast and simple one-step calibration procedure.
- - Tests all colors of gold from 6K to 24K.
Check Stock17 Pieces Gram Calibration Weight Set, 10mg-100g Precision 45# Steel Balance Scale Calibration Weight Kit with Tweezers for Digital Jewellery Scale Lab Educational Science Weights
- ★★★★★【High precision】Permissible Error +/- 0.003g.
- ★★★★★【Total Weight】Total Set of Weights:211.1g.
- ★★★★★【Application Range】Suitable for Digital Jewellery Scale, General Laboratory, Commercial, and Educational.
- ★★★★★【What you Get】1 x Plastic Storage Case.
- ★★★★★【Quality Service】1 YEARS WARRANTY,If you have any technical questions, please contact us and we will give you a detailed answer as soon as possible..
Check StockCTA Tools 1435 Disc Brake Gauge
- Practical: Measure the distance between the underside of the back plate and the brake disc.
- Material: Made of high quality metal materials, strong and durable, long term use.
- Wide range of applications: Suitable for internal and external brake pads with 1.5mm and calibration markings.
- Convenient: Measure the brake pads on the vehicle without removing the wheels.
- Customer Service: If you are not sure about our products, please contact us using your buyer information. We will offer you a solution within 24 hours.
Check StockMitutoyo 547-258SCAL Absolute Digimatic Depth Gauge with Calibration Inch/Metric Indicator Type 4 x 0.63 Base 0-8 0-200mm Range 0.00005 0.001mm Resolution +/-0.0003 Accuracy
- Calibrated depth gauge measures 0 to 8.0" (0 to 200mm) with 0.00005" (0.001mm) resolution and + or - 0.0003" accuracy, for measuring the depth of holes and other depressions.
- LCD screen of the indicator (Mitutoyo 543-392B) displays measurements in inches and metric units and unit has a flat back for stem/plate mounting.
- Comes with a carbide-tipped contact point and four extension rods (0.5", 1", 2", and 4") for flexibility in measuring range.
- Base is 4 x 0.63 inches (W x D) for stability, and is hardened, ground, and lapped for accuracy.
- Includes a Mitutoyo Certificate of Calibration that the tool has been calibrated, and meets the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.
Check StockAcouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge
- 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
- Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
- Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
- Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
- Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check StockMcbazel Surecom SW-102 Digital VHF/UHF 125-525Mhz Antenna Power & SWR Meter
- VSWR. Forward and reflected power direct digital readout, without any calibration. NOTE: DOES NOT compatible with Digital Radio..
- Maximum measurable power range up to 120W..
- Low insertion loss (0.3 decibels or less) structure allows it to be permanently connected..
- Build in Frequency country . Interface: N-J Interface.
- Frequency range: 125 - 525MHz. NOTE: ground plate is NOT included..
Check StockHandheld Colorimeter Color Difference Meter with Built-in White Plate 4mm Measuring Aperture
- ◆ Illuminating/Viewing Geometry: 8°/d.
- ◆ Double locating: Illuminating locating and precise cross locating..
- Built-in white plate parameters, no need to do calibration..
- ◆ 4mm measuring aperture Widely used in food, chemical industry, electronics, automobile, food and other fields..
Check StockNextech DFS1000 (1000N/220lbf/100kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
- Made in Thailand. Power adapter/charger input 100-240 volts AC..
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
- 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
- Re-calibration feature with password protection Load cell condition and overload counter's display page.
- Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
- Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
- Factory's calibration certificate included.
Check Stock