Best Cam Lock Barbed Fittings

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

• 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
• 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
• 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
• 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
• 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

• ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
• USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
• Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
• BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
• Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
• INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
• Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
• To install fittings, pull up lever on ball lock disconn....

Accoladesound 30PCS Furniture Cam Lock Nut Connectors Fittings, 15MM Fittings for Cabinet Drawer Dresser and Wardrobe Panel Connecting, Silver

• 30-PACK CAM LOCK NUT CONNECTORS FITTINGS——Material: Zinc Alloy, Anti-corrosion.
• Surface Treatment: Nickel Plating. Fit for various types of furniture, cabinet, drawer dresser..
• CAM CONNECTOR SIZE——Diameter (Approx.):15mm / 0.6″.
• Inner Height(Approx.): 3mm / 0.12″.Easy to install, thicken material..
• HOW TO USE——One of the three in one component, which needs to be used together with dowel pin and pre-inserted nut..
• APPLICATION WIDE——Cam Fittings fit for various types of furniture, cabinet, drawer dresser, wardrobe and furniture panel. (Please check the size before buying).
• YOU WILL GET——30Pcs Furniture Cam Fittings, solid and durable, not easy to twist off, long service life.

GlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 12.7mm ID Inner Diameter - Includes Clamps

• GlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 1/2" Inner Diameter Fuel Line.
• Features 1/2" (12.7mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps.
• Manufactured from 304 Stainless Steel that Prevents Corrosion.
• Includes Step-By-Step Installation Instructions.
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

FERRODAY Ball Lock Keg Disconnect Quick Ball Lock MFL Disconnect Flared 5/16” Gas 1/4” Liquid Barbed Stainless Swivel Nuts for Corny Keg Post Ball Lock Keg Fittings for Homebrew with Clamps

• 【Ball Lock Disconnects for Beer Keg】 Barbed beer keg ball lock disconnect fittings with MFL swivel nuts for beer kegs connecting with other....
• 【1/4" and 5/16" Barbs Already Included】 Complete ball lock keg disconnect fitting comes with 5/16” barb for white disconnect to connecting gas....
• 【Long-Lasting Useful Keg Disconnect】 Classic ball lock keg fittings of safe materials, Strong ABS for main body, stainless steel for swivel nuts,....
• 【Universal Ball Lock Quick Disconnect】 For most ball lock home brew Kegs. Gray disconnect for gas post, black disconnect for liquid post. Perfect....
• 【No Leaks & No Regrets Purchase】 We have tested hundreds of times and no leaks! We are committed to offer you with high quality product as well as....

GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 9.5mm ID Inner Diameter - Includes Clamps

• GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 3/8″ Inner Diameter Fuel Line.
• Features 3/8″ (9.5mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps.
• Manufactured from 304 Stainless Steel that Prevents Corrosion.
• Includes Step-By-Step Installation Instructions.
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Barbed Swivel Nuts for Ball Lock Disconnects 1/4" MFL Fitting - SET 2

Aluminum Cam and Groove Hose Fitting Type DD 2 with Spool Coupler with 1 PCS Camlock Gasket Fitting 2“ DD

• Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
• Female cam coupler at either end for connecting to male groove adapters.
• Aluminum for resisting corrosion and tarnishing.
• Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
• Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

• TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
• MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
• WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
• EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
• MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.

2PCS Global Type C Cam and Groove Hose Fitting 2 Socket x 2 Hose ID Barbed with 2 PCS Camlock Gasket Fitting 2

• Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
• One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
• Aluminum for resisting corrosion and tarnishing.
• Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
• Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.

300Pcs Barbed Connectors Irrigation Fittings Kit HOINCO Drip Irrigation Barbed Connectors for 1/4 Inch Tube for Flower Pot Garden Lawn Elbows End Plug Straight Barbs Tees 4-Way Coupling

• 【Barbed Connectors Irrigation Fittings Kit】：300Pcs irrigation kits total, including 100Pcs straight barbs, 80Pcs tees, 40Pcs oblique barbed elbows fittings, 40Pcs end plug, 40Pcs 4-way coupling. Drip irrigation connectors can save the water needed for irrigation in an efficient way and easily pass water to anywhere, bringing more convenience for your life..
• 【Drip Irrigation Barbed Connectors 】：Drip irrigation barbed connectors are made of high-strength plastic, which has a long service life and is not easy to fold and deform. The sufficient quantity is enough for your daily use and replacement..
• 【Suitable Size】：These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. (Suitable for 4mm ID 7mm OD tube). Our drip irrigation accessories help to build a practical and useful irrigation system. Please check the size carefully before purchasing..
• 【Easy to Install】：Directly insert the irrigation fittings kit at the end of the pipe, without tools or glue, making gardening more convenient and efficiently. If convenient, you can also use a heat gun or hair dryer to soften the end of the tubing before inserting..
• 【Wide Applications】：Suitable for gardens, patio, lawn, flower beds, terra....

Dixon G400-C-AL Aluminum A380 Global Type C Cam and Groove Hose Fitting 4 Socket x 4 Hose ID Barbed

• Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
• One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
• Aluminum for resisting corrosion and tarnishing.
• Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
• Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.

75 Pcs Furniture Connecting Cam Lock Fittings, Furniture Connecting Fastener Cabinet Connectors Hardware Bolts

• Suitable for 11mm, 12mm, 18mm plate thickness.
• Furniture connecting cam fitting is made of zinc alloy in silver tone , which is anti-corrosive, durable.
• Suitable for panel connection of panel furniture, office furniture, cabinets and wardrobes.
• Package : 75pcs Furniture Cam Lock Fittings.