Best Cam Lock Discharge Hose Fittings

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • 003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
Check Stock

Abbott Rubber - 1240-KIT-3000-1145-QC PVC Suction and Discharge Hose Pump Kit, Green/Blue, 3' Male X Female Aluminum Cam and Groove, 3' ID

  • All-In-One Kit Provides Everything Needed to Retrofit Your Pump.
  • Includes 20 ft PVC Suction, 50 ft PVC Discharge Hose, Steel Round Hole Strainer and Cam and Groove Adapter.
  • 3" Male X Female Cam and Groove Fittings Come Standard on Hoses.
Check Stock

Quafwia 2 pcs Polypropylene Camlock Fittings (1-1/2\ Type C) Cam lock Hose Fittings Standard Female Coupler x Hose End With Camlock Gasket Inside Camlock Fittings Poly (1-1/2\)

  • High Quality: Our 1-1/2" poly cam lock fittings are made of Polypropylene, which has high melting point, can be used as a sterilization container, and it has great resistance to chemical corrosion so that it could resist most chemicals..
  • Main Features: poly camlock fittings 1-1/2" can connect to two pipes or hoses. One female cam connector end for connecting to a male slot adapter, hose tail end for connecting to hoses..
  • Product Size: 150 C Cam & Groove Fitting 1-1/2" Female Coupler x 1-1/2" Hose Tail.
  • 100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within one month after your purchase, you can enjoy worry-free returns or replacement. Any questions feel free to contact us ,we will be there for helping you..
Check Stock

AGHITG Lightweight Backwash Hose 1-1/2' ID x 30 FT, Fire Hose Reinforced Lay Flat Sump Pump Hose for Swimming Pool Discharge

  • ...ash the hose first and then fold to store it. The flat fold designed makes it compact storage and saves your space. Avoid direct sunlight, to extend its life..
  • Application - This Scalable Industrial Hose applies to industrial, agriculture, construction, quarries, mines, fire-fighting equipment, ships, and other open discharge projects. It can be used for farmland irrigation, discharge of water from factories, swimming pools,etc. The pool backwash hose can be easily connected to a water pump, it can also be used with fire hydrants and fire pumps (cars)..
  • Packaging - Package includes an outdoor hose of 1.5 inches (inside diameter) x 30 feet (length). In addition, there also comes with accessories (include two 304 stainless steel wire clamps and a non-woven storage bag as a gift). The stainless steel wire clamps will help you connect Cam Groove Hose Fittings Male and Female, or Short Suction Coupling Set Aluminum Hose Fitting..
  • After-sales support - We are here to make sure you are 100% satisfied. If you encounter problems during use, please be sure to contact us, we will promptly respond and provide a perfect solution..
Check Stock

2PCS Global Type C Cam and Groove Hose Fitting 2 Socket x 2 Hose ID Barbed with 2 PCS Camlock Gasket Fitting 2

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
  • One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
  • Aluminum for resisting corrosion and tarnishing.
  • Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
  • Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check Stock

Dixon G400-C-AL Aluminum A380 Global Type C Cam and Groove Hose Fitting 4 Socket x 4 Hose ID Barbed

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
  • One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
  • Aluminum for resisting corrosion and tarnishing.
  • Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
  • Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check Stock

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

Gloxco 1-1/2\ x 25′ Blue Lay Flat PVC Hose Assembly with Aluminum Cam and Groove C and E Fittings used with a Sump Pump or Water Transfer Pump for Water Discharge, Pool Drain or Backwash

  • 1-1/2" ID, 2-3/8" Flat Width, Discharge Hose, 25 Ft Length.
  • Blue PVC Hose with 2 Spiral Plies Reinforcement.
  • 1-1/2" Female Type C Camlock x 1-1/2" Male Type E Camlock.
  • Aluminum Cam and Groove Fittings, Installed with 2 Galvanized Steel Bands per Side.
Check Stock

Lippert 359724 Waste Master 20’ Extended RV Sewer Hose Management System , Green

  • Comes complete with a time-tested CAM lock connector that ensures a leak-proof connection to the sewer outlet.
  • Hose is designed with its helical coil on the outside, while the inside is much smoother, preventing waste from getting trapped inside the hose.
  • UV-protected hose is 5'6" feet compressed and 20 feet extended and features technology that keeps it extended during use to the exact length required.
  • Permanently-connected nozzle is molded with an easy-grip handle, an integrated shut-off valve and a clear view port that allows the user to see when waste has completely evacuated.
  • Nozzle also features a 90 degree discharge port that is easy to fit and secure into any sewage inlet.
Check Stock

2' x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Camlock C and E Fittings

  • Pool Supplies - Flat discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Camlock C and E fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 3.15 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • Excellent Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfie....
Check Stock

1.5' x 50' Blue PVC Backwash Hose for Swimming Pools, Heavy Duty Discharge Hose Reinforced Pool Drain Hose with Aluminum Pin Lug Fittings

  • Pool Supplies - Discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Pin Lug fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 2.36 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • 100% Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock

Puri Tech 6 Pack Universal Pool Cleaner Suction Hose 48 Inches Long White Color for Kreepy Krauly, Baracuda G3/G4, Navigator, & More 4 Feet Long

  • Pool Supplies - Flat discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Pin Lug fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 3.15 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • Excellent Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock