Categories

Best Camaro Camber Plates

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Hot Wheels 2017 Star Wars Master & Apprentice Complete 8 Car Set of Diecast Vehicles

  • Hot Wheels Camaro Fifty 1967-2017 Exclusive 8 Car Set.
  • #1 '67 Camaro #2 '69 Camaro #3 '81 Camaro #4 '85 Camaro.
  • #5 '95 Camaro #6 '13 Camaro #7 '10 Pro Stock Camaro #8 '13 Copo Camaro.
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

Longacre® 52-78290 Digital Caster Camber Gauge

  • Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
  • Protect your investment - the caster camber gauge comes with a magnetic adapter and padded hard carrying case to keep your gauge safe when not in use.
  • Make front-end caster and camber adjustments quickly, easily, and accurately - this digital caster camber gauge is also backlit for use in dark areas.
  • Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
  • Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum.
Check Stock

BURTON Throwback Snowboard Sz 100cm

  • Camp Seven Roots CRC Snowboard: You asked for it and we delivered. The perennial fan favorite Roots finally has an alternate camber brother! The Roots CRC (camber-rocker-camber) is a new edition to the Roots line and allows riders to choose a board with a more loose and relaxed center of the board while loaded camber in the tip and tail put the pop right where you want it. If you think you know the Roots from years past, wait until you ride the new CRC version!.
  • Profile: Camber Rocker Camber Rocker in the center to free up your contact points for catch free riding and serious float in powder, is then paired with camber in the tip and tail for explosive pop and tons of added control..
  • System APX Bindings: features of this binding are a dream come true. Full length EVA base pad. Either-Or toe strap that can be ridden toe cap style or over the forefoot. Gel insert contoured straps. Inside routed ladder straps, Aluminum 4 tooth ratchets, 15% fiber inclusion in both the baseplate and the highback, anatomically correct footbed, comfy adjustable toe ramps, full dual sided on the fly strap adjustability via cam cleats on both toe and ankle straps..
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

WEISHUJI Aluminum Turnbuckles and Camber Links with Rod Ends,Adjustable Aluminum Steering Linkage Servo Link Pull Rod Turnbuckle for 1/10 RC Car, Red

  • Aluminum Turnbuckles and Camber Links with Rod Ends are OEM Hop-Up Upgrade Parts for RC Car 1/10 Scale Traxxas Slash 4x4..
  • Aluminum Turnbuckles and Camber Links with Rod Ends adds strength and adjustability to your RC Car..
  • Aluminum Turnbuckles and Camber Links with Rod Ends Length is approx 79-102mm (Min-Max)..
  • Aluminum Turnbuckles and Camber Links with Rod Ends is made of Aluminum Alloy with High precision..
  • Package of Aluminum Turnbuckles and Camber Links with Rod Ends includes: 2 x Adjustable Turnbuckles Camber Linkage Rod 4 x Screws.
Check Stock

VEVOR Wheel Alignment Tool, Toe Plates without Probes, Aluminum Alloy Toe Alignment Plates, Double 16ft Tape Measures Alignment Tools Automotive, Wheel Alignment Tool Gauge Camber Caster

  • HIGH FUNCTIONALITY: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • DURABLE STRUCTURE: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • STAND OFF WHEELS: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • MASTERFUL SLOTS: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • UNRESTRICTED USE: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

Longacre® 52-78298 Digital C/C Gauge, AccuLevel/QuickSet

  • Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
  • Perfect for large wheels - comes with a Longacre quick set large wheel adapter, suitable for 13" to 24" aluminum wheels.
  • The AccuLevel digital readout can be easily removed and used for other angle measurements on the car, such as suspension and driveline.
  • Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum and comes with a hard carrying case.
  • Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
Check Stock

VEVOR Wheel Alignment Tool, 4 Probes Toe Plates, Double 16 ft Measure Tapes, Stands Off Alignment Tools Automotive, Aluminum Alloy Toe Alignment Tool, Wheel Alignment Tool for Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Masterful Slots: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

IKON MOTORSPORTS Rear Diffuser Bumper Lip Compatible With 2016-2022 Chevrolet Camaro Glossy Black PP Ikon Style Valance Lower Body Protection Part

  • Compatible With 2016 Chevrolet Camaro LT, SS 2017 Chevrolet Camaro LS, LT, SS 2018 Chevrolet Camaro LS, LT, SS 2019 Chevrolet Camaro LS, LT, SS 2020-2022 Chevrolet Camaro LS, LT, LT1, SS.
  • Style: Ikon Style | Color: Glossy Black | Material: PP - Polypropylene.
  • Package Includes：1x Rear Bumper Lip Diffuser.
  • Bolt-on Installation, Instructions NOT included, Professional Installation is Highly Recommended..
Check Stock

Skunk2 Racing 916-05-0505 Rear Camber Kit Replacement Bushing

  • Compatible with: 2001 2002 2003 2004 2005 Honda Civic & 2002-2006 Acura RSX(Check Model Below Description).
  • 4 x Front Bolt Adjustable Camber Arm Kit.
Check Stock