Categories

Best Camera Cage For Blackmagic Pockets

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

  • [PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins..
  • [QUICK RELEASE TOP HANDLE] Provides More Flexibility When Operating and Handling.The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
  • The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
  • [RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.....
Check Stock

MAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K . This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera..
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points....
Check Stock

JTZ DP30 Camera Cage 15mm Rail Rod Baseplate Rig+ 4×4″ Carbon Fiber Matte Box+ Follow Focus+ Power Supply (LE Version) for SONY A7,A7II,A7R,A7RII,A7S,A7SII DSLR Camera

  • Specially designed cage for SONY A7S A7SII A7SM2 A7R A7RII A7M2 A7 II Cameras,the set is assembled by Camera Cage with 15mm Baseplate Rig and Top Handle,4×4″ Carbon Fiber Matte Box,Follow Focus,LE Version Power Supply.
  • Equipped with JTZlink, through JTZlink’s top handle can achieve the Camera Video Start / Stop Function. Only the Zoom,W/T,Focus,REC buttons on the handles are available for Sony A7 A7R A7S Series Camera,Other buttons are unavailable,like IRIS.
  • DP30 takes ALLinOne concept into its structure design, and this ensures all main modules of it compatible with almost all main cinema cameras, video dslr cameras, video mirrorless cameras on the market.
  • With this cage, you only need to change the mounting plate to be compatible with other cameras. The customized mounting plates for Sony A9 A6000 A6300 A6300 A7/A7R/A7S III camera sold separately.
  • The Top handle and 15mm baseplate rail rod rig are universal modules for JTZ Camera Cage,you just need to change the camera cage module for GH3 GH4 GH5 GH5s BMPCC Blackmagic Pocket FS5 cameras,the customized cage modules sold separately.
Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for BMPCC 6K Pro!】.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, als....
Check Stock

NEEWER Aluminum Alloy Filmmaking Camera Video Cage Rig with Top Handle, 2 Grips, Standard Arca Type Base, Compatible with Sony Alpha 7S III A7IV A6600 Canon EOS R5C R5 R6 DSLR Mirrorless Camera, VS107

  • 【Universal Camera Cage】 Engineered with premium CNC aluminum alloy, this Neewer camera cage is universally compatible with Canon EOS 90D/ EOS 6D Mark II/, Sony Alpha 7C/ Alpha 7 III/ Alpha 7R IV/ Alpha 9 II/ Alpha 6600, Nikon Z 6/ Z 6Ⅱ/ Z 7/ Z 7Ⅱ, Blackmagic 4K / 6K ,Fujifilm X-T4, Panasonic ,Pentax, and other DSLR mirrorless cameras and camcorders up to 33lb/15kg.(This product is not suitable for a lens with support ring, so please remove the support ring before use).
  • 【Comprehensive Upgrade】 The upgraded cage features a dual-rod base, two 15mm-diameter rods, and a standard 60mm rail gauge for attaching follow focus, hood, lens support, and other accessories. The non-slip top silicone handle and the two ergonomic handgrips with synthetic leather textures and finger contours offer you a comfortable grip.
  • 【Diverse Mounting Points】 The top of the cage has numerous 1/4” and 3/8” female threads, cold shoes, and compatible ARRI locating holes for mounting magic arms, cold shoe mount adapters, microphones, field monitors, LED video lights, RGB lights, and other accessories that will facilitate your video shooting in any situation.
  • 【Easy Camera Installation】 An integrated 1/4” aluminum alloy thumb screw with knurls adds friction for qu....
Check Stock

Blackmagic Design Cinema Camera Shoulder Strap

  • Bundle Includes: Blackmagic Design Pocket Cinema Camera 6K Pro, Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon DSLR Cameras, SanDisk 128GB Extreme PRO CFast 2.0 Memory Card, Knox Gear Nylon-Braided 4K High-Speed HDMI Cable with Ethernet (6-Foot), and Koah 2-Pack Sony NP-F570 Rechargeable 3350mAh Battery and Dual USB-C LCD Charger.
  • Built in ND Filters: The Blackmagic Pocket Cinema Camera 6K Pro features high-quality, motorized IR ND filters that let you quickly reduce the amount of light entering the camera. The 2, 4 and 6 stop filters have been designed to filter both optical and IR wavelengths evenly, eliminating IR contamination of the images.
  • Dual Gain ISO for Exceptional Low Light Performance: The 6K Pro camera features dual gain ISO up to 25,600, which means it’s optimized to minimize grain or noise in images, while maintaining the full dynamic range of the sensor. The native ISO of 400 is ideal for scenes with on-set lighting. The secondary high base ISO of 3200 is perfect when shooting in dimly lit environments.
  • Shoot Still Frames up to 21.2MP: In addition to shooting video, the Blackmagic Pocket Cinema Camera can capture high resolution stills. Simply press the dedicated stills button to record 21.2-megapixel images. Still images are saved as f....
Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

  • Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
  • 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
  • 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “Smal....
Check Stock

Blackmagic Design Pocket Cinema Camera 4K CINECAMPOCHDMFT4K W/Micro Four Thirds Mount + Condenser Shotgun Microphone LED Light 64GB Card Monopod Backpack Strap & Complete Video Bundle

  • When Talking about The Blackmagic Pocket Camera 4K, you Find how Lightweight it is Thanks to Its Carbon Fiber Polycarbonate Composite that Makes it....
  • The Large 5" Touchscreen Display of the Blackmagic Pocket 4K Reduces the Need for an External Onboard Monitor, while a Full-sized HDMI Port Enables....
  • The Pocket Cinema Camera 4K has a Micro Four Thirds Lens Mount that accepts the original, lightweight Pocket Cinema Camera lenses, as well as PL, C,....
  • The Blackmagic Pocket Cinema Camera 4K CINECAMPOCHDMFT4K features a Full size 4/3" HDR Sensor offers DCI 4K 4096 x 2160 imagery up to 60 fps, a Dual....
  • The Blackmagic Pocket Cinema 4k Camera Comes w/ PROFESSIONAL EDITING: DaVinci Resolve Studio Activation Key - the very same tools & software....
Check Stock

Blackmagic Pocket Cinema Camera 6K G2 (Canon EF) with Sigma 18-35mm Accessory Bundle (6 Items)

  • Bundle Includes: Blackmagic Design Pocket Cinema Camera 6K G2 (Canon EF), Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon DSLR Cameras, two SanDisk 128GB Extreme PRO 200MB/s SDXC UHS-I Memory Cards, Koah Canon LP-E6 and LP-E6N Rechargeable 2000mAh Li-ion Battery and Charger, and Steren 6-Feet 4K HDMI High-Speed Cable with Swivel Head.
  • Features: The Blackmagic Pocket Cinema Camera 6K G2 features a Super 35 size sensor, 13 stops of dynamic range and dual native ISO up to 25,600 for HDR images and incredible low light performance.
  • Controls: External controls give quick access to essential functions, while the large 5-inch touchscreen makes it easy to frame shots, focus accurately and change camera settings.
  • 13-Stop Dynamic Range: Blackmagic Pocket Cinema Camera has an incredible 13-stop dynamic range which means it preserves more detail in the lightest and darkest areas of an image than simple video cameras can.
  • Super 35 Sensor and Canon EF Lens Mount: Featuring a larger 6144 x 3456 Super 35 sensor and Canon EF lens mount, the Blackmagic Pocket Cinema Camera 6K G2 lets customers use lar....
Check Stock

Blackmagic Design Pocket 4K Cinema Camera Bundle with 64GB Memory Card and Case (3 Items)

  • Bundle Includes: Blackmagic Design Pocket 4K Cinema Camera, SanDisk 64GB Extreme PRO 170 MB/s UHS-I SDXC Memory Card, and Koah Weatherproof Hard Case with Customizable Foam (13 x 11 x 6 Inch).
  • Elegant Design: The Pocket Cinema Camera 4K features a next generation design that makes it the world’s lightest, most portable, and durable full feature 4K digital film camera. The portable handheld design of the Blackmagic Cinema 4K doesn’t sacrifice features just because of its compact size.
  • 4K Digital Film Sensor: The Blackmagic Camera features a full size 4/3 sensor that gives you an incredible 4096 x 2160 video resolution with a full 13 stops of dynamic range for excellent digital film quality. The 4/3 sensor reduces crop factor to give you a wider field of view. Dual native ISO of up to 25600 gives you fantastic low light performance.
  • Highly Advanced: With 3 different kinds of media to record on, this 4K camera lets you choose between standard SD cards, UHS-II cards, or CFast 2.0 cards. You can even record directly onto an external SSD using the built-in USB-C Expansion Port. The Blackmagic OS is the world’s most advanced camera operating system.
  • Touchscreen: You’ll never need an external monitor or viewfinder thanks to the awesome super large and su....
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • 【ONLY FOR BMPCC 6K PRO】SmallRig Full Cage 3382 is specially designed for Blackmagic Design Pocket Cinema Camera 6K Pro and its related battery grip. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. Furthermore, it adopts ergonomically design on right side, hence a comfortable grip experience..
  • 【ANTI-TWIST FUNCTION】SmallRig 3382 firmly locks via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles, and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 355g, the cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance..
  • 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
  • 【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus r....
Check Stock

Fotga Battery Mount Plate Adapter for Sony BP-U60 BP-U30 U70 U90 Battery to Power Blackmagic BMD BMCC BMPCC BMPC Pocket Cinema Camera,Device w/ 5.52.5mm Input Extra DC5521 for Another Device

  • The battery mounting plate can be mounted on to BlackMagic Cinema Camera with the 1/4" Screw.
  • The battery mounting plate allows you power your BlackMagic Cinema Camera with BP-U60 / U30 battery,or device with 5.5*2.5mm input.
  • If you are the user of PMW-EX1R EX1 EX3 F3 EX160 EX280, it could be your great, because you needn't to buy extra battery now to power your BlackMagic....
  • Output voltage:14.8V.In addition, there is a jack (OD:5.5mm, ID: 2.1mm ), allow you to power another device.
  • Compatible with: For S0NY BP-U60 BP-U30 batteries. For BlackMagic Production Camera 4K BMPC BMCC BMPCC.
Check Stock

Blackmagic Design URSA Viewfinder, URSA and URSA Mini Compatible, 1920 x 1080 Color OLED Display

  • PURPOSE: The Blackmagic URSA Viewfinder is the perfect accessory to make outdoors and handheld shooting with your URSA or URSA Mini digital film camera easy.
  • HIGH QUALITY: You get an extremely high quality viewfinder with 1080HD resolution display, true precision glass optics, built in tally light and built in menus, overlays and even a digital focus chart.
  • CONNECTIONS: Computer Interface - USB 2.0 Mini-B port for software updates.
  • WHAT'S INCLUDED: Blackmagic URSA Viewfinder.
  • 3/8 inch viewfinder mounting thumb screw for URSA.
  • METADATA SUPPORT: Detects camera information embedded in the SDI signal from URSA, URSA Mini and Blackmagic 3G-SDI Shield for Arduino.
Check Stock