Categories

Best Camshaft Bevel Gear

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

ATPEAM Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.4 1.6 1.8 en6340 km6340

  • Preminum Material: The engine camshaft tensioning locking alignment timing belt tool kit is made made of premium quality materials. It gives the tools high strength and long time performance. It is rust and corrosion resistant. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock..
  • Application: This engine camshaft tensioning locking kit is compatible with Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine.Astra-G / H / Corsa-D / insignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011. Also compatible with Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines..
  • Accurate: All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine.
  • Package Included: Includes 1×Camshaft locking tool, 2 × Camshaft gear locking tools, 1 × Flywheel locking tool, 1 × Engine Tensioner spanner, 1 × V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 × Timing belt tensioner locking tool..
  • Storage Case: The locking alignment timing belt tool kit is packed in a heavy-duty case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the....
Check Stock

TIOIT COEME Engine Camshaft Tensioning Locking Alignment Timing Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.8 1.6 1.4 EN 6340 EN 6333

  • ENGINE TIMING TOOL KIT: Designed to lock the camshafts in their required timed position. Use these tools to fix camshaft tensioner or other parts in the motor, and then check or replace parts. All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine, as same as the OEM.
  • APPLICABLE ENGINES: This engine timing tool kit compatible with Chevrolet Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine. Also Fits for Chevrolet Cruze Orlando 1.4 1.6 1.8 and Fiat Croma Alfa Romeo 159 with 939A4.000 engines..
  • HIGH QUALITY TOOL: Our alignment locking tools kit is made made of premium quality materials. It gives the tools high strength and long time performance, is rust and corrosion resistant. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock. All the tools have been put in a case, easy to carry and find. help you locking the camshafts in their required timed position.
  • PACKAGE INCLUDE: 1×Camshaft locking tool, 2 × Camshaft gear locking tools, 1 × Flywheel locking tool, 1 × Engine Tensioner spanner, 1 × V-ribbed belt tensioner locking tool, 1 × Crankshaft locking tool, 1 × Timing belt tensioner locking tool and 1 × Blow molded tool cas....
Check Stock

JoyTube Engine Camshaft Tensioning Locking Alignment Kit Timing Belt Tool for Chevy Cruze Aveo Alfa Romeo 16V 1.4 1.6 1.8 en6340

  • Tool kit is made made of premium quality materials. It gives the tools high strength and long time performance. It is rust and corrosion resistant. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock..
  • Compatible with Vehicle: Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine.
  • Astra-G / H / Corsa-D / nsignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011.
  • Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines..
  • Designed to lock the camshafts in their required timed position..
  • Package includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 Timing belt tensioner locking tool..
  • Refer to your vehicle manufacturer service information user manual to use this cam kit and accurately set up the timing system..
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Orion Motor Tech Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.4 1.6 1.8 en6340 km6340

  • ENGINE TIMING TOOL KIT: Does your Chevrolet, Fiats or Alfa Romeo engine feel unstable or have weak acceleration? Use these tools to fix camshaft tensioner or other parts in the motor, and then check or replace parts..
  • PREMIUM MATERIAL: Orion Motor Tech parts are made with high-quality corrosion resistant materials with maximum durability and strength, getting your engine running like new. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock..
  • APPLICABLE ENGINES: Our alignment locking tools are compatible with a large range of engines including Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine. Also fits Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines..
  • STRICTLY TESTED: For quality assurance, our parts have been rigorously tested to improve efficiency and provide the highest-grade tools on the market. Look to Orion Motor Tech for the finest craftsmanship and the most reliable parts that will fix your engine in no time..
  • EASY TO USE: This engine timing tool kit is equipped with a step-by-step user manual for quick and easy application. Includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner....
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

EWK Engine Camshaft Tensioning Locking Alignment Timing Tool Kit for Chevy Cruze Aveo, Alfa Romeo, Fiat, Opel 16V 1.6 1.8 EN 6333 EN 6340

  • 【Must Have】Accurately fits Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engines. Comes with camshaft locking tools EN 6340, belt tensioner locking pins EN6333 and the other required kits for perfect camshaft alignment..
  • 【Built to Last】Made of corrosion-resistant carbon steel to maximize the durability. Designed to firmly lock the camshafts in their required timing position without deformation..
  • 【Wide Applications】Suitable for Chevrolet Aveo / Cruze / Orlando / Trax 1.6 1.8.
  • fit Opel / Vauxhall Astra-G /H /J / Corsa-D / Insignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011.
  • 【Complete Kit】Includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 Timing belt tensioner locking tool, and a carrying storage case..
  • 【Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock