Categories

Best Camshaft Holding Tool

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Yoursme Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION:Fit for Chevrolet 1999 CAL V8 5665cc 5.7L.
  • 2005-2009 GM V8 5328cc 5.3L, 1999-2005 GM V8 5665cc 5.7L, 2005-2011 GM V8 5967cc 6.0L,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

XianFeng Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL,Black

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Yuesstloo Camshaft Holding Tool Kit with Tension Tool, Timing Alignment Holder Tool for Ford 3.5L & 3.7L 4V Engines, Replace 303-1248 303-1530, with Portable Case and Gloves

  • Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain..
  • Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682.
  • Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store..
  • Made of high-quality steel and coated with black oxide finish, anti-rust, wear-resistance and durable, with high hardness, high precision and great compatibility..
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • ...ord Transit 1.6L EcoBoost, Puma, Escort/Orion, Tourneo Connect, Mondeo Hybrid, Galaxy, Maverick, Mazda MPV, Mazda Tribute, Mazda 3 etc. if you don't know whether fit your car, you can see your car engine model, or contact us, offer the VIN or engine model, we will serve you wholeheartedly.
  • Function: Used to lock the camshafts in their timed position when engine or rebuild required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
  • 12 Months Warranty: Made of high quality steel, high hardness, not easy to break, the surface is coated with black anti-oxidation layer or plated to prevent rust. We offer 12 months WARRANTY, we will refund or replace, if the timing tool have any quality problem , or you can contact us, we will serve you wholeheartedly.
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • ...ing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty..
Check Stock

Yuesstloo Turbo Engine Timing Tool Kit for Vauxhall Opel Chevy Chevrolet Aveo Cruze 1.0 1.2 1.4, Camshaft Holding Locking Tool Set with Case & Gloves

  • Comes with a portable case, easy to carry and store the tools. Boxes contained crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2, and with a pair of gloves..
  • Made of high-quality steel, durable, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin..
  • Yuesstloo Turbo Engine Timing Tool Kit is compatible with Vauxhall Opel, Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Aveo1.2 1.4 (2011-), Corsa-D 1.0 1.2 1.4 (2009-), Cruze 1.4 (2011-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Orlando 1.4 (2012-), Zafira-C Tourer 1.4 (2011-).
  • Engine Codes: LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER.
Check Stock

ATPEAM Engine Camshaft Tensioning Locking Alignment Timing Belt Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.4 1.6 1.8 en6340 km6340

  • Preminum Material: The engine camshaft tensioning locking alignment timing belt tool kit is made made of premium quality materials. It gives the tools high strength and long time performance. It is rust and corrosion resistant. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock..
  • Application: This engine camshaft tensioning locking kit is compatible with Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine.Astra-G / H / Corsa-D / insignia / Mervia / Signum / Vectra-C / Zafira-B 2003-2011. Also compatible with Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines..
  • Accurate: All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine.
  • Package Included: Includes 1×Camshaft locking tool, 2 × Camshaft gear locking tools, 1 × Flywheel locking tool, 1 × Engine Tensioner spanner, 1 × V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 × Timing belt tensioner locking tool..
  • Storage Case: The locking alignment timing belt tool kit is packed in a heavy-duty case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the....
Check Stock

TIOIT COEME Engine Camshaft Tensioning Locking Alignment Timing Tool Kit Compatible with Chevy Cruze Aveo Alfa Romeo Fiat 16V 1.8 1.6 1.4 EN 6340 EN 6333

  • ENGINE TIMING TOOL KIT: Designed to lock the camshafts in their required timed position. Use these tools to fix camshaft tensioner or other parts in the motor, and then check or replace parts. All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine, as same as the OEM.
  • APPLICABLE ENGINES: This engine timing tool kit compatible with Chevrolet Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine. Also Fits for Chevrolet Cruze Orlando 1.4 1.6 1.8 and Fiat Croma Alfa Romeo 159 with 939A4.000 engines..
  • HIGH QUALITY TOOL: Our alignment locking tools kit is made made of premium quality materials. It gives the tools high strength and long time performance, is rust and corrosion resistant. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock. All the tools have been put in a case, easy to carry and find. help you locking the camshafts in their required timed position.
  • PACKAGE INCLUDE: 1×Camshaft locking tool, 2 × Camshaft gear locking tools, 1 × Flywheel locking tool, 1 × Engine Tensioner spanner, 1 × V-ribbed belt tensioner locking tool, 1 × Crankshaft locking tool, 1 × Timing belt tensioner locking tool and 1 × Blow molded tool cas....
Check Stock

ARES 70074 - 2-Piece Fan Clutch Wrench Set - 32mm Fan Clutch Nut Wrench - Water Pump Holder Removal Tool Kit

  • 【Water Pump Sprocket Holder Tool】The water pump sprocket holder tool can hold the timing chain in place so that the water pump can be removed for maintenance. The full-circle structure of the tool can well hold everything in place, avoid camshaft readjustment, and keep parts from falling into the timing chain cover..
  • 【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life..
  • 【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
  • 【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
  • 【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engi....
Check Stock