Categories

Best Camshaft Holding Tool Bmw

DPTOOL Valve Pressure Spring Installer/Remover Tool Plier for BMW Mini N12 N14 N16 N18 Engine Timing Tool and for Peugeot Citroen 1.6T

  • Applicable Engine: Compatible with BMW MINI N12, N16, N18.
  • for Peugeot 207, 308, EP6 Engine. Replace BM number119571 119572 119573.
  • Function: Specially designed to remove and install the pressure spring on intermediate lever. and the valve slider holding pliers could easy to install the valve slider.
  • Accurate : Our valve pressure spring remover and installer have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine.
  • More Convenience : This kit include valve pressure spring remover/ installer , and valve slider holding pliers, three tools put in a suitcase, the case design easy to store and carry.
  • Quality Guarante: Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. and we offer lifetime warranty, let you order without worry.
Check Stock

ATPTOOL Compatible for BMW N51 N52 N53 N54 N55 Engine Camshaft Timing Locking Tool Kit

  • Compatible Vehicles: Suitable for a wide range of BMW N51, N52, N53, N54, N55 engine 2.5 & 3.0 chain drive, 6-cylinder..
  • Durable:Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool..
  • Usage: For Installing and removing of camshaft/ variable camshaft timing unit,and fixing timing position of camshaft and crankshaft when replacing or adjusting timing belt or chain and timing the engines..
  • Package Including: 1x Camshaft Crankshaft Timing Locking Tool Kit, 1x blow molding case..
  • Engine Compatibility: E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i E64/E65: 630i,730i E66/E70: 730Li,X5 3.0Si E81/E82: 130i,135is E93: 325i,328i,330i,335i E83: X3 2.5i,2.5Si,3.0i,3.0Si E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i.
Check Stock

8MILELAKE Car Camshaft Retaining Tool Kit EN 48383 and EN 46105 Fit for Cadillac, Buick, Saturn, fit for Pontiac, Chevrolet, Chevy 2.8L 3.0L 3.6L

  • APPLICATION: This EWK Camshaft Retaining Tool Kit is a direct replacement EN 46105 & EN 48383. this camshaft holding tool specifically designed to look and function the same as the original camshaft retaining tool on engine..
  • FIT FOR: This camshaft retaining tool set fit for Vauxhall/Opel/Saab/Cadillac/Holden 2.8i, 3.6i V6 engines Suitable for Engine codes: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
  • FEATURE: Plates are oversized to prevent the valve covers being installed should the tools be accidentally left on the engine.
  • DURABLE MATERIAL: Made of premium alloy steel. Designed to firmly lock the camshafts in their required timing position without deformation..
  • PACKAGE INCLUDES: 3pcs x Camshaft Retaining Tool.
Check Stock

Camshaft Holding Tool Timing Alignment Holder Tool Set Kit for Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682

  • Fitment Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor.
  • for Lincoln MKS, MKT, MKX, MKZ, Navigator.
  • for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682.
  • Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool.
  • Material: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine.
  • Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service.
  • Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem.
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Yoursme Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION:Fit for Chevrolet 1999 CAL V8 5665cc 5.7L.
  • 2005-2009 GM V8 5328cc 5.3L, 1999-2005 GM V8 5665cc 5.7L, 2005-2011 GM V8 5967cc 6.0L,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

XianFeng Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 for GM IN-LINE 6 CYL,Black

  • HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
  • INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
  • APPLICATION: In-line 6 Cylinder 2.8L 4 Cylinder compatible with Chevrolet 2004-2007 Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy,....
  • PACKAGE INCLUDED: 1 X Camshaft Holding Tool..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Check Stock

Yuesstloo Camshaft Holding Tool Kit with Tension Tool, Timing Alignment Holder Tool for Ford 3.5L & 3.7L 4V Engines, Replace 303-1248 303-1530, with Portable Case and Gloves

  • Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain..
  • Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682.
  • Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store..
  • Made of high-quality steel and coated with black oxide finish, anti-rust, wear-resistance and durable, with high hardness, high precision and great compatibility..
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • ...ord Transit 1.6L EcoBoost, Puma, Escort/Orion, Tourneo Connect, Mondeo Hybrid, Galaxy, Maverick, Mazda MPV, Mazda Tribute, Mazda 3 etc. if you don't know whether fit your car, you can see your car engine model, or contact us, offer the VIN or engine model, we will serve you wholeheartedly.
  • Function: Used to lock the camshafts in their timed position when engine or rebuild required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
  • 12 Months Warranty: Made of high quality steel, high hardness, not easy to break, the surface is coated with black anti-oxidation layer or plated to prevent rust. We offer 12 months WARRANTY, we will refund or replace, if the timing tool have any quality problem , or you can contact us, we will serve you wholeheartedly.
Check Stock

Yuesstloo Camshaft Alignment Timing Tool Kit, Engine Locking Timing Tool Compatible with BMW Mini Cooper N12 N13 N14 N16 N18 Peugeot 1.6T, with Portable Case & Gloves

  • Yuesstloo camshaft alignment timing tool kit is used to replace the cylinder head seal and motor timing. Made of premium steel material, has high hardness and high precision, durable to use..
  • Timing Tool Set is compatible with BMW Mini Cooper N12 N13 N14 N16 N18 engine, works for Citroen C4 Peugeot 1.4, 1.6 V16 petrol. Apply for BMW 1 Series (114i.
  • 320i), Clubman (Cooper S R55), Clubman (JCW R55), Countryman (Cooper / Cooper S R60, JWC R60), Coupe (Cooper S / JCW R58), Mini (Cooper S R56/R87, Paceman (Cooper / JCW R61), Roadstar (Cooper S/JCW R59).
  • Suitable Engine Code: N13 B16A, N18 B16A, N18 B16C, N18, B16A/MO, N18 B16C/TO..
  • Comes with a portable heavy-duty Case, all parts are neatly placed, and have a pair of gloves can be worn when using tools. Convenient to operate and store, easy to transport and organize..
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock