Categories

Best Can Ethernet Module

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

BMW ENET Interface Cable (OBD to Ethernet) For Coding Diagnostics

  • 1: Enet Ethernet cable on ALL F-Series Cars 2009-2017.1. ENET data cable, E-net E-SYS F series programming cable.Brush out and program much hidden data and functions..
  • 2: Enet cable compatible with F series,the new 1 Series(F20), 3 Series(F30), 5 Series(F10), 6 Series(F12),7 Series(F01/02), GT(F07), X3(F25),X5((F15),New X6(F16)...etc. Enet Ethernet cable For use with E-SYS, ISTA, Dr.Gini ..
  • 3: The enet top quality,super-six production lines , shielding interference, signal transmission intensity , really pure copper wire, green insulation , you will found,this is the best quality in the Market Enet Ethernet cable One can hide modules or program single module..
  • 4 :brush hidden upscale programming line.TIPS: Software not included. Enet Ethernet cable Without Software comes with cable..
  • 5:Before purchasing,please make sure you understand engineer software and can operate it by yourself. Our store does not provide tech guidance. Installation tutorials are not available. You must install and use it yourself. Diagnostics and complicated programming, brush hiding must use ICOM devices. Suggestion windows 7,8 system in 64 bits. If meet problem, please contact with our service central.Thank you!.
Check Stock

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

  • Power supply mode:3.3V external power supply, current should be more than 200mA.
  • USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
  • W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
  • Control interface:The TTL level, 3.3V SPI interface.
Check Stock

iCreatin 8-Port Passive Power Over Ethernet PoE+ Injector Adapter with 48V 65W Power Supply for 8 POE Enabled IP Camera, VOIP Phones, Access Points and More, 10/100Mbps

  • This Power over Ethernet module allows you to power up to 8 devices remotely over ethernet (10/100Mbps) wiring up to 328 ft (100 meters) away.
  • Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable..
  • Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground..
  • For Many popular devices like IP Cameras, IP Phones, WiFi Access Points and more.
  • 48V 65W high quality UL listed power supply included, can power for IEEE802.3af device..
Check Stock

Chase Research IOLAN DS1 1-Port Device Server (04030124)

  • Nonstandard baudrates supported with high precision.
  • Port buffers for storing serial data when the Ethernet is offline.
  • Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
  • Modular design for scalability / DES/3DES/AES for highly secure data transmissions.
Check Stock

Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]

  • Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
  • Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
  • Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
  • Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
  • Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock

Ambient Weather Weather Hub

  • ENHANCED WIFI OR DIRECT ETHERNET CONNECTION: Connect your sensors wirelessly over WiFi or ethernet to the world's largest personal weather station network.
  • EASY SET UP: The Weather Hub IP module connects directly to your router and is configured through any web browser..
  • SMART HOME READY: Set up alerts, access your data remotely, and program your home based on weather conditions using IFTTT, Google Home, Alexa, and more.
  • JOIN THE COMMUNITY: Connect to Ambient Weather Network to customize your dashboard tiles, share hyperlocal weather conditions via social feeds and create your own forecasts (coming soon)..
  • Weather stations & sensors sold separately.
Check Stock

iCreatin 4-Ports Passive Power Over Ethernet PoE Injector Adapter Midspan w/ 48V65W Power Supply for 4 IP Camera, VOIP Phones or Access Points

  • This Power over Ethernet module allows you to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away.
  • Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable..
  • 10/100M operation, Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground..
  • For Many popular devices like IP Cameras, IP Phones, WiFi Access Points and more.
  • 48V 65W high quality UL listed power supply included, power for IEEE802.3af device..
Check Stock

MOXA NPort 6650-16 - 16 Ports Rackmount RS-232/422/485 Secure Device Server 100V~240VAC Input

  • Nonstandard baudrates supported with high precision.
  • Port buffers for storing serial data when the Ethernet is offline.
  • Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
  • Modular design for scalability / DES/3DES/AES for highly secure data transmissions.
Check Stock

PUSOKEI Desktop Computer Motherboard, DDR4 Motherboard, 2133/2400/2800MHz, 4-Channel Audio, CPU Motherboard, Support PCIE/SATA Mode

  • The rear 4 USB3.0 ports and Gigabit Ethernet dual indicator design make the motherboard run more stable and faster..
  • The motherboard uses a modular and large heat dissipation power supply design to maintain low temperature and high efficiency..
  • The wireless net card module interface can be directly installed with the same wireless ne card module of the laptop..
  • Provide M.2 high‑speed hard drive, support PCIE and SATA mode, small size and large broadband..
  • Equipped with digital status display and buzzer, the operating status of the motherboard is clear at a glance, and the sound reminder is clearer..
Check Stock