Categories

Best Cantilever Scope Mount

Vortex Optics Sport Cantilever 30mm Mount - 3-Inch Offset

  • Use this cantilever mount for mounting 30 mm telescopic sights..
  • The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces..
Check Stock

Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset

  • Use this cantilever mount for mounting 30 mm telescopic sights..
  • The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
Check Stock

Vortex Optics Sport Cantilever 1-Inch Mount - 2-Inch Offset (CM-102),Black

  • Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles..
  • The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle..
  • The cantilever ring mount positions thecenterof the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces..
Check Stock

Vortex Optics Sport Cantilever 30mm Ring - Absolute Co-Witness | 1-inch Offset Black

  • Provides extra rail room for rear Back Up Iron Sights (BUIS) when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring....
  • Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount....
  • Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..
Check Stock

Vortex Optics Pro Extended Viper 34mm Cantilever Mount Black

  • Vortex Pro 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base..
Check Stock

Vortex Optics Pro Extended Viper 30mm Cantilever Mount , Black

  • Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base..
Check Stock

HIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount

  • FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
  • the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
  • ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
  • the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
  • RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
  • HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
  • we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check Stock

WestHunter Offset Cantilever Dual Ring Picatinny QD Scope Mount, 1 inch 30 mm Quick Release Scope Rings | Black

  • Position the center of the scope tube at a height of 1.42 in / 36 mm from the base.
  • The high profile QD cantilever scope mount fits for both 30mm and 25.4 mm (1 inch) tube optics with up to a 70mm outer objective diameter.
  • Scope mount with qick detach locks for Picatinny rail, can freely adjust the tightness of the base to ensure stability.
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in anodizing.
  • Easy installation, perfect for shooters(Sold 1Pcs mount per package).
Check Stock

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

  • This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

RD004T TACFIRE Rd004-T 1x30 Ill Red/grn Dot Sight Tan

  • TacFire Official Product, 1x30mm Tactical Dual-Illuminated Red/Green Dot Rifle Scope Sight in Dark Earth Tan with Cantilever Weaver Base Mount with Lens Covers and Battery Included..
  • Specifications of the Red Dot Sight: Magnification: 1x, Obj. Aperture: 30mm, Field of View: 50 degrees, Eye Relief: Unlimited, Illumination: Red & Green , Reticle Type: Dot, Dot Size: 4 MOA, Material: Lightweight 6061 T6 Aircraft Grade Aluminum.
  • Dimensions of Red Dot: Length: 5.25", Width: 2.56"/65mm, Height: 2.75"/70mm, Net Weight: 9.7 oz..
  • Included in the package: Dual-Illuminated Red/Green Dot Sight x1, Flip-Up lens covers, Cantilever Weaver Base Mount x1, CR2032 Battery x1, Hex Wrench x1, Cleaning Cloth x1.
  • Features of the Red Dot Sight: Durable Cantilever PEPR mount for any 20mm Picatinny or Weaver rail with Quick Attachment Rail Design Allowing Precision Fit, Adjustable Windage and Elevation, Intensity brightness Control Settings Per Color, Fog Proof, Weather Proof, and Shock Resistant, Removable Spring loaded flip-up lens covers..
Check Stock

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Monstrum Spectre 1-8x28 LPVO Rifle Scope | Flat Dark Earth

  • Low power variable optic from 1-8x magnification with a 34 mm scope tube and an integrated throw lever for smooth adjustment control.
  • Features a brand new second focal plane MX1 box reticle with MOA hashmarks. Second focal plane reticles remain the same size at all magnification levels for high visibility at all magnifications.
  • A new and improved optics assembly, providing a shorter scope with longer eye relief and wider eye box.
  • More anti-reflective lens coating than competing scope models, offering higher light transmission and superior optical clarity.
  • Includes a 34 mm offset cantilever scope mount and a set of spring loaded flip up lens covers.
Check Stock

AT3 Tactical 1-6x24 Red Tail Rifle Scope with Mount - 1-6x Magnification - Illuminated BDC Reticle

  • RANGE AND FIELD READY - This isn't just a scope. It's a scope with a one-piece mount and all the accessories and instruction you need to get started....
  • FAST AND ACCURATE - Use 1x magnification for the speed of a red dot sight, or crank up the magnification for accurate long-range shot..
  • BULLET DROP COMPENSATION (BDC) - Easy to use illuminated reticle provides accurate holdovers out to 600 yards for popular cartridges.
  • ADJUSTABLE IN THE FIELD - Tactical windage and elevation turrets make adjusting for environmental factors simple and fast for your next shot.
  • INSIDE THE BOX - Scope, Cantilever Mount, Flip-Up Lens Caps, Throw Lever, CR2032 Battery, Instruction Sheet.
Check Stock