Categories

Best Cantilever Tv Mount

Vortex Optics Sport Cantilever 1-Inch Mount - 2-Inch Offset (CM-102),Black

  • Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles..
  • The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle..
  • The cantilever ring mount positions thecenterof the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces..
Check Stock

Vortex Optics Sport Cantilever 30mm Ring - Absolute Co-Witness | 1-inch Offset Black

  • Provides extra rail room for rear Back Up Iron Sights (BUIS) when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring....
  • Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount....
  • Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..
Check Stock

HIRAM Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm

  • QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes.
  • DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy.
  • the torx screws are also heat-treated for added stability and strip prevention.
  • LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting.
  • CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market.
  • we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come.
Check Stock

Mount-It! Lockable RV TV Wall Mount with Quick Release, Full Motion Flat Screen Bracket for Campers, Travel Trailers, RVs, Motorhomes and Marine Boats, Fits Most 23-43\ VESA 100, 200, 77 Lbs Capacity

  • QUICK CONNECT TV MOUNT - Looking for must have camper accessories? This RV wall mount works with your VESA-compatible television from 23" to 42" TVs..
  • CANTILEVER LOCKABLE ARM - A secure wall bracket with an articulating arm that locks into a folded position and releases with an anti-vibration spring lock..
  • DETACHABLE VESA BRACKET - The VESA plate is removable to conveniently remove a TV from the wall bracket for extended storage, or to quickly reinstall it..
  • FULL MOTION ADJUSTABILITY - Tilt +10/-15 degrees, Swivel +/- 90 degrees, Extension 2.3" - 15.7.
Check Stock

RD004T TACFIRE Rd004-T 1x30 Ill Red/grn Dot Sight Tan

  • TacFire Official Product, 1x30mm Tactical Dual-Illuminated Red/Green Dot Rifle Scope Sight in Dark Earth Tan with Cantilever Weaver Base Mount with Lens Covers and Battery Included..
  • Specifications of the Red Dot Sight: Magnification: 1x, Obj. Aperture: 30mm, Field of View: 50 degrees, Eye Relief: Unlimited, Illumination: Red & Green , Reticle Type: Dot, Dot Size: 4 MOA, Material: Lightweight 6061 T6 Aircraft Grade Aluminum.
  • Dimensions of Red Dot: Length: 5.25", Width: 2.56"/65mm, Height: 2.75"/70mm, Net Weight: 9.7 oz..
  • Included in the package: Dual-Illuminated Red/Green Dot Sight x1, Flip-Up lens covers, Cantilever Weaver Base Mount x1, CR2032 Battery x1, Hex Wrench x1, Cleaning Cloth x1.
  • Features of the Red Dot Sight: Durable Cantilever PEPR mount for any 20mm Picatinny or Weaver rail with Quick Attachment Rail Design Allowing Precision Fit, Adjustable Windage and Elevation, Intensity brightness Control Settings Per Color, Fog Proof, Weather Proof, and Shock Resistant, Removable Spring loaded flip-up lens covers..
Check Stock

Vortex Optics Pro Extended Viper 34mm Cantilever Mount Black

  • Vortex Pro 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base..
Check Stock

Vortex Optics Pro Extended Viper 30mm Cantilever Mount , Black

  • Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base..
Check Stock

Vortex Optics Precision Extended Cantilever Mount - 34mm

  • Use this cantilever mount for mounting 34mm tubes..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

Vortex Optics Precision Extended Cantilever Mount – 30mm – 20 MOA

  • Use this cantilever mount for mounting 30mm tubes. Built-in 20 MOA cant..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

Vortex Optics Precision Extended Cantilever Mount for 30MM Riflescopes, Black (CM-530)

  • Use this cantilever mount for mounting 30mm tubes..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

ohhunt 30mm Scope Mount Cantilever Scope Mounts for 30mm Tube Rifle scopes (Tan)

  • 30mm scope mounts with Torx Screws and Square-shaped Integral,Recoil Stops for a Secure and Repeatable Zero Hold..
  • Square-shaped Integral Recoil Stops Perfect fit Picatinny Rail,Slots(Not suitable for Weaver Slots)..
  • The 2.6-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief..
  • Scope mount with a base of 3 inches and 2.36 inches of spacing between the rings..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.57 inches (40 mm) from the base..
Check Stock

AT3 Tactical RD-50 PRO Red Dot Sight with .83' Riser - for Absolute Cowitness with Iron Sights - 2 MOA Compact Red Dot Scope

  • ACCURATE – Crisp 2 MOA red dot sight allows for accurate, both-eyes-open shooting. 11 red dot brightness settings provide optimal visibility in any light conditions. Multi-coated, scratch resistant amber lens provides enhanced image clarity..
  • DEPENDABLE – Fully waterproof with sealed housing (IPX67). Lifetime Warranty. Shockproof circuitry resists damage from rough handling. Matte black anodized finish resists scratches while keeping a stealthy profile..
  • INCREDIBLE VALUE – Exceptional battery life – up to 50,000 hours at the lowest brightness setting. Genuine Renata CR2032 Lithium battery included. Factory direct pricing – no distributor markup..
  • LIGHTWEIGHT Cantilever MOUNT – Includes Medium .83” Cantilever Riser Mount for “absolute” cowitness with iron sights..
  • INSIDE THE BOX – Red dot sight, 0.83” PRO-MOUNT Riser, CR2032 Battery, Rubber bikini cover, Instruction sheet, Lens cloth, Allen wrench.
Check Stock

HIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount

  • FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
  • the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
  • ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
  • the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
  • RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
  • HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
  • we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check Stock