Categories

Best Cap Bolt Nut Shaft

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

Zivisk 5Set Single Chainring Bolts 7075 Aluminum Alloy M8 Crankset Chainwheel Bolts Fit for MTB Road Bicycle - Golden

  • Made of 7075 aluminum alloy,super lightweight and durable.
  • Single Chainring Bolts:Nut Shaft Diameter:10mm.Nut Shaft Length:4.5mm.Bolt Head Diameter:8mm.Bolt Head Length:6mm.
  • Use 5mm inner hexagon spanner to install the bolts.
  • The Chainring Bolts Fit for universal single chainring/ chainwheel used..
  • Package Included:5 x Single Chainring Bolts (set).
Check Stock

Saiper 10pcs Double Chainring Bolts M8 Chain Ring Bolts for Road Bike Mountain Bike BMX MTB Crankset

  • Appearance:Advanced anodized painting tech brings exquisite shape comes out the look of fashion style for your bikes.
  • The bolt is made of 7075 aluminum alloy material with high strength, lightweight, corrosion-resistant and durable.
  • 10pcs Double Chainring Bolts: Nut Shaft Diameter: 10mm. Nut Shaft Length: 7mm. Bolt Head Diameter: 8mm. Bolt Head Length: 7.6mm.
  • PRECISION AND DURABLE. T6 treated and CNC machined and chamfered. With maximum precision and durability.
  • Note：only compatible with Double chainring. Use 4mm inner hexagon spanner to install the bolts. Suitable for mountain bikes, road bike, folding bike, fixed gear bike, downhill bike, track bike, MTB, BMX, DH, etc.
Check Stock

RocRide Single Chainring Bolts in Aluminum or Steel. Pack of 5.

  • MATERIAL - This bike single chainring bolts made of high-strength alloy steel material, the appearance of electroplating treatment, bright and shiny colors, rust-proof performance is excellent,light wight and built tough fitness..
  • SPECIFICATION - Single chainring bolts nut shaft Diameter:10mm,nut shaft Length:5.5mm,bolt head Diameter:8mm,bolt head Length:8.5mm.
  • Weight: 23g/5pcs(0.05lb)Use for Hole depths of 5-9mm..
  • FEATURES - Use 5mm inner hexagon spanner to install the bolts,Only use for single chainring/crankset,used for chainrings that require 4 or 5 bolts,perfect replacement for old accessories single chainring bolt set comes with 5 bolts.Upon install use the correct size metric Allen wrench and be sure to insert it all the was till it stops..
  • WIDE USE - Suitable for mountain bikes, road bike, folding bike, fixed gear bike, downhill bike, track bike, MTB, BMX, etc..
  • SERVICE - Please do not hesitate to contact us for any problems, will do our best to solve your problem quickly and efficiently..
Check Stock

Klein Tools 631M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Nut Drivers' full hollow shaft designed with Rare-Earth magnetic tips facilitate work on long bolt applications.
  • Tool Set contains Nut Driver Cat. Nos.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M.
  • Cushion Grip handles allow for greater torque and comfort and internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver with Workout Cooling Towel

  • Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver.
  • Designed with a heavy duty crank, steel frame, and a 30lbs chromed solid flywheel.
  • Transportation wheels on the bottom for easy portability.
  • IN THE BOX: 1x Main Frame 2x Front Stabilizer 1x Rear Stabilizer 1x Handlebar 1x Seat Post 1x Seat Slider 1x Saddle 3x Pop-pin Knob 1x Set of Pedals 1x Set of Cranks 4x Leveler Feet 4x Oblong Cap 10x Flat Washer 4x Allen Bolt 3x Plastic Bushing 1x Square Cap 2x Phillips tapping screw 4x Hex Nut M10 1x Water Bottle Holder 2x Nylon Nut 2x Foam Grip 2x End Cap 4x Allen Bolt 4x Spring Washer 1x Set of Handle Bar Covers 1x Handlebar Post 4x Phillips Screw 2x Allen Bolt 2x Roller 1x Allen Wrench S6.
  • BUNDLE INCLUDES: Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver - Workout Cooling Towel Orange.
Check Stock

Klein Tools 630M 3\ Hollow Shank Magnetic Tip Nut Driver Set (2 Pieces)

  • Nut Drivers' hollow shaft design with Rare-Earth magnetic tip facilitates work on bolt applications.
  • Tool Set contains: 1/4-Inch (630-1/4M) and 5/16-Inch (630-5/16M) hex sized nut drivers.
  • Cushion-Grip handle allows for greater torque and comfort and handle end is color coded for easy identification.
  • Internal flanges provide solid, twist-resistant shaft anchor.
Check Stock

Klein Tools 65160 Tool Set, Metric Nut Driver Set Sizes 5, 5.5, 6, 7, 8, 9, and 10 mm, 3-Inch Chrome-Plate Hollow Shafts, 7-Piece

  • Nut Drivers are standard length for most applications and fit over long bolts and studs.
  • Tool Set includes metric nut driver sizes 5, 5.5, 6, 7, 8, 9, and 10mm.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver and size.
  • Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.
  • Premium chrome plated shaft for smooth feel and corrosion resistance.
Check Stock

Klein Tools 647 Tool Set, Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2-Inch, Chrome-Plated 6-Inch Shafts, Cushion Grip, 7-Piece

  • Tool Set includes general purpose selection of the most frequently used nut drivers.
  • Nut Drivers' 6-Inch (15 cm) full hollow shaft facilitates work on long bolt applications.
  • Set contains Klein Cat. Nos. 646-3/16, 646-1/4, 646-5/16, 646-11/32, 646-3/8, 646-7/16 and 630-1/2 nut drivers.
  • Cushion Grip handles allow for greater torque and comfort.
  • Shafts are chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges provide solid, twist-resistant shaft anchor.
Check Stock

DPS6 Clutch Tool Double Dual Clutch Dry DPS6 Transmission Reinstall Reset Tool for Ford Volvo Focus Fiesta #307675

  • 【Fit on】 Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017..
  • 【Instruction】Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.Spare Top Plate Part No 1681, Spare Force Screw Assembly Part No 1682. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing..
  • 【Satisfaction Guarantee】 We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. We also support a 12-month warranty..
Check Stock

[4-Sets] 3500lbs Trailer Axle Bearing Kit - L44649/10, L68149/11 for #84 Spindle 1.719''- 10-19 (171255TB) Seal, Dust Cap, Spindle Nut, Shaft Washer, Lug Nuts

  • ✔️[Tapered Roller Bearings] - L44649 / L44610 -- Set , L68149 / L68111 -- Set.
  • ✔️[Grease Seal] - 171255TB Double Lip (10-19) --.
  • ✔️[Hardware] - Cotter Pin, Dust Cap, Shaft Washer, Spindle Nut, Lug Nuts, Tang Washer.
  • ✔️[Application] - Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
  • ✔️ [Quantity in Package] - 4 Sets of L44649/L44610 , 4 Sets of L68149/L68111, 4 Pieces of Grease Seal 171255TB (10-19), 4 Pieces of Tang Washer, 4 Pieces of Cotter Pin, 4 Pieces of Dust Cap, 4 Pieces of Spindle Nut, 4 Pieces of Shaft Washer, 20 pieces of Lug Nuts.
Check Stock