Categories

Best Capillary Copper Coil

CDN Large Dial Cooking Thermometer

  • For temperature measuring on refrigeration equipment, chilled systems etc.
  • 48" copper capillary, white plastic covered.
  • "Range: -40-65 deg F/-40-20 deg C, reading can be re-calibrated".
Check Stock

GM Genuine Parts D1539J Brake Light Switch

  • 12 awg tinned copper wires for Pin 30, Pin 87. Length: 5.1in.
  • 16 awg tinned copper wires for Pin 85, Pin 86. Length: 5.1in.
  • 12-volt relay (max 14-volt). 40a/30a High switching capability.
Check Stock

TOWOT Solder Wick Braid with Flux No-Clean Electronic Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10 L 5

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 9.8'

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

1 Quart / 950ml 85% Food Grade Phosphoric Acid Rust Remover Clean Etch Metal

  • Inner Tank: Food Grade SUS 304-2B, Outer Tank: Galvanized Steel 0.5 mm thickness.
  • Insulation: high pressure automatic polyurethane foaming layer, Density of 36 kg/m3, R-Value: 12.5.
  • In Tank Coil: TU1 copper (Red Copper), thickness: 1mm, Length of Coil:66 ft.
  • Water Ports: 3/4" NPT, Coil Ports: 1/2" MPT, T/P Valve/Abode Rod/Drain Port: 3/4.
Check Stock

Moonshadows Opaque Natural Vinyl

  • ☑️ PURIFY YOUR LIFE WITH LUXAR - Introducing the Luxar 7 chakra orgone pendant. We have hand set the seven chakra stones behind the Metatron’s....
  • ☑️ 7 HAND-SET CHAKRAS - Chakra translates to “wheel”. The 7 chakras in the body are distinct energy centers that start at the top of your head....
  • ☑️ METATRON'S CUBE DESIGN -The orgone pendant is made from a metal Metatron's Cube symbol with the 7 chakra stones set behind it (amethyst, lapis....
  • ☑️ COPPER SBB COIL - The SBB coil is surrounded by obsidian and clear quartz crystals. It is believed that the SBB copper coil directs the....
  • ☑️ HANDMADE - Each handmade pendant is 2 inches in diameter and comes with a beautiful fabric necklace and presentation box..
Check Stock

Magneto stator ignition coil scooter compatible for 70cc 90cc 110cc 125cc Taotao Kazuma SSR Baja ATV Quad Dirt Kick Bike 4 Wheeler

  • 2-coil Magneto stator plate Suitable for: 70 cc, 90 cc, 110 cc and 125 cc four-stroke bicycles. the new stator plates perfectly replace the following....
  • Full copper coil, Enameled wire full copper, Aluminum plate disc, High density material to prevent damage2-Coil Magneto Stator. Top Quality....
  • Package include:1 x ignition stator magneto plate.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort....
Check Stock

Wostore 50 Ft. Copper Pipes 1/4' & 3/8' for Mini Split Air Conditioner Insulated Coil Line Set Made in USA HVAC Refrigerant with Nuts

  • 50 Ft. insulated high quality seamless copper tube showing no leaks, high and low pressure lines..
  • 1/4" & 3/8" O.D. for Mini Split Air Conditioners..
  • Insulated copper coil line set is made in USA..
  • Excellent UV resistant: The insulated copper twin line set has been successfully tested by method ASTM G154..
  • Copper coil line set for ductless mini split air conditioner and heat pump systems..
Check Stock

Emtel 22 AWG - 1 lb (460 gr) Copper Magnet Wire - Enameled Wire for Motor, Transformer, Speaker, Magnetic Coil, Winding Wire - Up to 220°C (428°F) - Double (Heavy) Build Insulation Craft Wire - Spool

  • BEST QUALITY RAW MATERIAL: We use high purity of electrolytic A Grade %99.99 pure solid copper wire in our production..
  • HIGH THERMAL RESISTANCE: 22 Gauge Emtel Enameled Wire is Durable to high temperature as up to 220°C (428°F).
  • UL APPROVED: We produce our enameled copper wire according to NEMA MW-1000 requirements. Our UL File Number is E336772. NEMA Approvals: MW35-C and MW37-C High quality!.
  • STRONG INSULATION THICKNESS: EmTherm 22 AWG enameled copper wire has Double (Heavy) Build insulation with Polyesterimide base coat + Polyamideimide top coat..
  • EMTEL MAGNET WIRE QUALITY: Our enamel insulated copper magnet wire is widely used in the production of transformer, wound coil, electric motor, solenoid, inductors coil, speaker coil, electromagnets, tesla coils and other science project applications that require tight coils of insulated wire..
Check Stock

Emtel 18 AWG - 1 lb (460 gr) Copper Magnet Wire - Enameled Wire for Motor, Transformer, Speaker, Magnetic Coil, Winding Wire - Up to 220°C (428°F) - Double (Heavy) Build Insulation Craft Wire - Spool

  • BEST QUALITY RAW MATERIAL: We use high purity of electrolytic A Grade %99.99 pure solid copper wire in our production..
  • HIGH THERMAL RESISTANCE: 18 Gauge Emtel Enameled Wire is Durable to high temperature as up to 220°C (428°F).
  • UL APPROVED: We produce our enameled copper wire according to NEMA MW-1000 requirements. Our UL File Number is E336772. NEMA Approvals: MW35-C and MW37-C High quality!.
  • STRONG INSULATION THICKNESS: EmTherm 18 AWG enameled copper wire has Double (Heavy) Build insulation with Polyesterimide base coat + Polyamideimide top coat..
  • EMTEL MAGNET WIRE QUALITY: Our enamel insulated copper magnet wire is widely used in the production of transformer, wound coil, electric motor, solenoid, inductors coil, speaker coil, electromagnets, tesla coils , craft wire and other science project applications that require tight coils of insulated wire..
Check Stock

(2) Rockville KPS80 8' 800w Karaoke Speakers+Mixer+Tripod Stands+Wireless Mics

  • ... Pair of RockvilIe Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2. (2) RockvilIe RVSSA1 Universal 35mm Mounting Tripod Pole Speaker Adapter Bracket. (1) RockvilIe RWM1203VH Wireless Dual HandHeld Microphone System/Digital Display.
  • (2) RockvilIe RCXBN20 20 Foot 1/4" TS to Banana Speaker Cable, 16 Gauge, 100% Copper. : Pair RockvilIe KPS80 8" 3-Way 800 Watt Karaoke Speakers with Wall Brackets and MDF Enclosure. Peak Power: 1600 Watts Per Pair (800 Watts Each). Program Power: 800 Watts Per Pair (400 Watts Each). RMS Power: 400 Watts Per Pair (200 Watts Each). 3-Way Speaker with Built-In 3-Way Crossover for Amazing Sound!. 8 Low Frequency Woofer With 1.37, 100% Copper Voice Coil and 37 oz. Ferrite Magnet.
  • 3.85 High Frequency Tweeter With 3.5 oz. Magnet and 0.39" 100% Copper Voice Coil. 3.85 Mid-Range Speaker with 3.5 Oz magnet and 100% Copper Voice Coil Gives Amazing Sounding Voice. Tweeter Is Made Of A Special Blend of Iron That Is Tuned To Sound Great For Voice and Music. 0.6 Inch Thick MDF Enclosure With Built-In Computer Tuned Port For Incredible Sound. Speaker Weight: 8.8 Lbs. Each. Woofer Has a Steel Basket OFC 100% Copper Voice Coils and a Paper Cone.
  • Foam Surrounds for Great Sound Quality. Aluminum Voice Coil Bobbin. Metal Speaker Grilles. ....
Check Stock

NTE Electronics SW02-10 No-Clean Solder Wick 4 Blue.098 Width 10 Length

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Available with standard or anti-static bobbins.
Check Stock

IRHAPSODY 5 PACK 80/60 AMP Waterproof Relay and Harness - Heavy Duty 12 AWG Wires, 12 V DC 5-PIN SPDT Bosch Style Automotive Relay

  • 12 AWG tinned copper wires for Pin 30, Pin 87, Pin 87a. Length: 5.1 in.
  • 16 AWG tinned copper wires for Pin 85, Pin 86. Length: 5.1 in.
  • 12 V DC waterproof relay (max 14 V). 80 A / 60 A High switching capability.
  • Excellent waterproof performance, high quality in any weather conditions.
Check Stock