Categories

Best Capricorn Bowden Tubing

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • 100% Genuine Capricorn XS Bowden TubingCapricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • Less FrictionHigh Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(bla....
Check Stock

Sovol Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Creality Ender 3 Ender 3 Pro Ender 5 CR-10,CR-10S 3D Printer

  • 100% Original Capricorn XS Serious tubing Original..
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints， less....
  • Lower retraction will save you more time while the extruder retracts in printing..
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest....
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our....
Check Stock

Creality Capricorn 2 Meters XS Series Low Friction PTFE Bowden Tubing for 1.75mm Filament with PTFE Tube Cutter for Creality Ender 3 Ender 3 Pro Cr-10 3D Printer

  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints， less....
  • Lower retraction will save you more time while the extruder retracts in printing..
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest....
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our....
Check Stock

Creality Capricorn Bowden Tubing 1M Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

  • GENUINE UPGRADES: Creality Capricorn XS Serious Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less....
  • COMPATIBLE WITH MORE FILAMENTS: This bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher....
  • SMOOTHER FILAMENT OUTPUT: Designed for 1.75mm filament, Creality capricorn tubing has extremely accurate inner & outer diameter, and filament loads....
  • BEST ENDER SERIES ACCESSORIES: Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is....
  • GREAT PACKAGE: Package comes with two PC4-M6 fittings for the extruder and two PC4-M10 coupler for the hot end, Its 4mm inner diameter is used for the....
Check Stock

Creality Capricorn Bowden PTFE Tubing Tube XS Series 1 Meter 1.75MM Filament with PTFE Teflon Tube Cutter for Ender 3 Ender 3 Pro, Ender 5, Ender 5 Plus CR-10,CR-10V2 3D Printer

  • 100% Original Capricorn XS Serious tubing Original..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved..
  • 1.9mm 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

  • 【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • 【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • 【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • 【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
  • 【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mainboard with Metal Extruder Frame Use Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard : Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Semi-Assembled Kits: Creality ender 5 pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard V4.2.2: Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110¡æ in 5 minutes..
  • Semi-Assembled Kits: Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ... firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & part....
Check Stock