Categories

Best Car Brake Tool Kit

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

LEAPGOMAX Club Car Golf Cart Brake Drums/Hub&Brake Shoes Spring Kit Fit Club Car DS 1995-Up&Precedent 2004-Up, Golf Cart Brake Maintenance Kit OEM#101791101 1018232-01 101816301

  • ⛳【UNIVERSAL FIT】The golf cart brake drums and brake shoes kit fit for Club Car Precedent gas & electric (2004-up) golf carts and DS (1995-up) gas & electric models..
  • ⛳【Club Car Brake Drum/Hub】2 PCS Club Car replacing brake drum/hub will allow your golf cart to perform as intended. Replaces OEM Number(s): 1017911-01,10603..
  • ⛳【Club Car Brake Shoes】4 PCS self-adjusting (2 long and 2 short) golf cart brake shoes set for one Club Car DS or Precedent golf cart. Replaces OEM#1018232-01..
  • ⛳【Club Car Brake Shoes Spring Kit】12 PCS Club Car brake shoes spring Kit Included. Replaces OEM#101816301..
  • ⛳【Keep Safe】This golf cart brake shoes spring kit & brake drums maintenance kit good for improving your cart brake's performance. Replace worn or damaged parts to keeps your cart safe..
Check Stock

MOSNAI Club Car Golf Cart Brake Drums/Hub & Brake Shoes Spring Kit Fit Club Car DS 1995-Up&Precedent 2004-Up

  • ✅Fit Models: Club Car brake shoes and drums kit fit Club Car DS 1995-up gas & electric golf cart and Precedent 2004-up gas & electric golf cart models..
  • ✅Club Car Brake Shoes Spring Kit: Replaces OEM # 1018163-01,1011466, After Market # 4324, 4333, 5162, 5219..
  • ✅Upgraded Club Car Brake Shoes Pads: Includes 4 PCS Club Car brake shoes which are 2 short -17T and 2 long-17L, replaces OEM# 1018232-01. You don't need to worry about the brake issues or fracture problem..
  • ✅Club Car DS Brake Drum: Replace OEM #1017911-01, the brake drum in this kit does NOT have the center hole, it will NOT fit older Club Car golf cart..
  • ✅Package Include: Our Club Car brake drum set can be installed easily. 4 x Club Car brake shoes (2 short, 2 long), 2 x Club Car brake drums and 2 x sets club car brake shoes spring kits for one complete cart..
Check Stock

MOSNAI Club Car Brake Shoes Spring Kit Fit 1980 UP DS & Precedent Club Car Brake Kits Golf Carts Brake Shoes Kit Gas/Electric 1018163-01, 1011466(2 Sets)

  • ✅High Quality Club Car Brake Shoes Kit Fits 1980 UP Club Car Gas Or Electric..
  • ✅Fit For: Club Car Brake Shoes Spring Kit Fits 1980 & UP DS & PRECEDENT..
  • ✅Fit For: Club Car OEM # 1018163-01,1011466,After Market #S 4324, 4333, 5162, 5219..
  • ✅12 Pcs Club Car Brake Shoes Kit Includes:(4) Brake Shoe Clamp Sprins,(4) Brake Shoe Hold Down Pins.(2) Bottom Brake Shoe Spring, (2)Top Brake Shoe Spring.(For Two Sides,One Cart).
  • ✅Package Include: 2 Sets Club Car Brake Shoes Spring Kits For One Golf Cart. Easy Installation..
Check Stock

LEAPGOMAX Club Car Brake Shoes and Spring Kit for DS G&E 1995-up (Automatic Adjust)& Precedent 1018232-01 Golf Cart Replacement Brake Shoe Pads (2 Short & 2 Long)

  • ⛳Include 4Pcs Club Car Brake Shoes and 2 sets Spring Kit For a Golf Carts Equipped With Automatic Adjusting Brakes.(2 Short&2 Long)..
  • ⛳Club Car Brake assembly Fits Club Car Golf Carts DS G&E 1995-up,Precedent Golf Carts Models. Brake Shoes OEM Reference Model:Club Car OEM: 1018232-01..
  • ⛳Club Car DS Precedent Brake Shoes Spring Kit OEM #S 1018163-01,1011466,After Market #S 4324, 4333, 5162, 5219..
  • ⛳Kit Contains 4 Brake Shoes Club Car (2 short, 2 long) and 2 set club car brake spring kit, For a Complete Cart..
  • ⛳Package: 2 Kits Required Per Cart. Easy Installation & 1 Year Warranty..
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
  • NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensur....
Check Stock

LEAPGOMAX Club Car Brake Assembly, Driver&Passenger Side Rear Brake Cluster Fits Club Car DS Precedent 1995-UP Tempo 2018-up Golf Cart,101823301 103380202

  • ⛳【Universal Fit】Complete golf cart brake assembly kit for Club Car DS Precedent Gas & Electric 1995-up and Tempo 2018-up golf cart. Easy Installation..
  • ⛳【OEM Numbers】OEM part number: Club Car brake assembly 1033802-01,4246,1018233-02.Left (Driver Side),1033802-02,4202,1018233-01 Right (Passenger Side)..
  • ⛳【High Quality】【High QualityA pair of Club Car rear brake cluster new replacement golf cart 1995-Up&Tempo 2018-up.OEM quality aftermarket replacement..
  • ⛳【Easy Installation】1 pair golf cart brake assembly for one Club Car. Easy installation direct replacement without adjusting the brake spring..
  • ⛳【Package】Includes Club Car brake backing plate cover, brake spring kit(upper & lower spring, adjuster springs, cup spring with pin), brake adjuster kit,golf cart brake shoes with retainers..
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

ATPEAM 24PCS Disc Brake Caliper Tool Set Wind Back Tool Kit for Brake Pad Replacement Reset

  • Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
  • Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
  • Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
  • Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
  • 2 x Handed Thrust Bolt Assemblies (Left & Right).
  • Blue Blow Mold Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

ATPEAM 24pcs Heavy Duty Disc Brake Caliper Tool Set and Wind Back Kit for Brake Pad Replacement

  • Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
  • Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
  • Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
  • 2 x Handed Thrust Bolt Assemblies (Left & Right).
  • Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
  • Black Storage Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

CLUBRALLY Brake Shoes Spring Kit Fits Club Car 1995-up DS and Precedent Golf Cart 1018232-01 1018163-01

  • ★CLUB CAR BRAKE SHOES SPRING KIT FITS 1995 UP DS & PRECEDENT CLUB CAR GAS OR ELECTRIC GOLF CARTS..
  • ★BRAKE SHOES INCLUDES:Golf Cart Brake Shoes Set(2 Short-17T, 2 Long-17L).
  • ★12 PCS BRAKE SHOES SPRING KIT INCLUDES:(4) BRAKE SHOE CLAMP SPRINGS,(4) BRAKE SHOE HOLD DOWN PINS.(2) BOTTOM BRAKE SHOE SPRING,(2)TOP BRAKE SHOE SPRING..
  • ★CLUB CAR OEM #1018163-01,1011466 1018232-01,AFTER MARKET #S 4324, 4333, 5162, 5219..
  • ★Complete for one golf cart. Easy Installation & 1 year Warranty..
Check Stock